UK and Europe · Public discussion

Jumping chain.

Started by Tazlvr · · Last activity · 10 posts · 550 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
UK and Europe
Published
31 December 2004
Last activity
1 January 2005
Original author
Tazlvr
Posts
10
Discussion status
Public discussion
Total views
550
Views / 30 days
1

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–10 of 10
Posts remain in their original chronological order.

Text size
  1. I have a new bike. It has ShimanoDeore gears.When I'm on smaller sprockets
    the chain seems to slip a tooth. It does it randomly, not just when i'm
    putting a lot of pressure on it. I can't get to the bikeshop now until after
    new year. I went on to Sheldon Brown which said it's either a worn chain,
    which it obviously isn't or bent deurailler, which it isn't. Any ideas as to
    what it could be.
    TIA
    Gaz

  2. "Tazlvr" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    I have a new bike. It has ShimanoDeore gears.When I'm on smaller sprockets
    the chain seems to slip a tooth. It does it randomly, not just when i'm
    putting a lot of pressure on it. I can't get to the bikeshop now until
    after new year. I went on to Sheldon Brown which said it's either a worn
    chain, which it obviously isn't or bent deurailler, which it isn't. Any
    ideas as to what it could be.
    TIA
    Gaz


    Check each link Gaz. Make sure they all pivot freely. If you find a stiff
    link use sideways pressure to ease it off.

  3. "Tazlvr" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    I have a new bike. It has ShimanoDeore gears.When I'm on smaller sprockets
    the chain seems to slip a tooth. It does it randomly, not just when i'm
    putting a lot of pressure on it. I can't get to the bikeshop now until
    after new year. I went on to Sheldon Brown which said it's either a worn
    chain, which it obviously isn't or bent deurailler, which it isn't. Any
    ideas as to what it could be.


    Other respondents' suggestions about stiff links are reasonable, especially
    if it's a new bike. However, also make sure that any spacers are correctly
    positioned in the cassette (you should be able to see if some sprockets are
    much closer together than the others), that the teeth of the sprockets
    concerned are not damaged (be careful, because Shimano HG sprockets are
    oddly and irregularly shaped anyway), and even that there are no bolts
    (mudguard fixing, e.g.) fouling the chain.

  4. in message <[email hidden]>,

    (') said:

    See: http://sheldonbrown.com/derailer-adjustment.html#stifflink

    Coo!

    Now that's an honour, lad, that most folk don't get.

    The great Sheldon answering your question himself.

    --
    [email hidden] (Simon Brooke) http://www.jasmine.org.uk/~simon/
    Windows 95:
    You, you, you! You make a grown man cry...
    M. Jagger/K. Richards

  5. "Tazlvr" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    I have a new bike. It has ShimanoDeore gears.When I'm on smaller sprockets
    the chain seems to slip a tooth. It does it randomly, not just when i'm
    putting a lot of pressure on it. I can't get to the bikeshop now until


    after

    Quoted message said:

    new year. I went on to Sheldon Brown which said it's either a worn chain,
    which it obviously isn't or bent deurailler, which it isn't. Any ideas as


    to

    Quoted message said:

    what it could be.

    New bike = cables settling in (possibly). Tighten the cable a quarter turn
    at a time at the rear mech adjusment screw. Test to see if the bike shifts
    smoothly.

    Else go to the basic method. Stick the bike in the second smallest rear cog
    and turn the barrel adjuster until the chain just just just wants to skip up
    to the next cog, then turn the barrel back one (or two) quarter turns (the
    bike does need to be off the ground for this method).

    John

  6. Eatmorepies said:

    "Tazlvr" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    I have a new bike. It has ShimanoDeore gears.When I'm on smaller
    sprockets the chain seems to slip a tooth. It does it randomly, not
    just when i'm putting a lot of pressure on it. I can't get to the
    bikeshop now until after new year. I went on to Sheldon Brown which
    said it's either a worn chain, which it obviously isn't or bent
    deurailler, which it isn't. Any ideas as to what it could be.

    New bike = cables settling in (possibly). Tighten the cable a quarter
    turn at a time at the rear mech adjusment screw. Test to see if the
    bike shifts smoothly.

    My new bike used to skip, mainly on the smallest 2 rear cogs, and I thought
    I had a dodgy rear casette, but I finally adjusted the cable tension and
    that fixed it.

  7. Adrian Boliston said:
    Eatmorepies said:

    "Tazlvr" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    I have a new bike. It has ShimanoDeore gears.When I'm on smaller
    sprockets the chain seems to slip a tooth. It does it randomly, not
    just when i'm putting a lot of pressure on it. I can't get to the
    bikeshop now until after new year. I went on to Sheldon Brown which
    said it's either a worn chain, which it obviously isn't or bent
    deurailler, which it isn't. Any ideas as to what it could be.

    New bike = cables settling in (possibly). Tighten the cable a quarter
    turn at a time at the rear mech adjusment screw. Test to see if the
    bike shifts smoothly.

    My new bike used to skip, mainly on the smallest 2 rear cogs, and I thought
    I had a dodgy rear casette, but I finally adjusted the cable tension and
    that fixed it.


    If it's new wait until after new year and go back to the shop. Don't
    mess with stuff if it's their responsibility to fix it.
    Hell it's only a day or two, can't you use an old bike or just make do?
    Sniper8052

  8. On 31 Dec 2004 08:52:17 -0800, [email hidden] wrote in
    message <[email hidden]>:

    Quoted message said:

    Sheldon "Very Large Website" Brown

    LOL!

    Hapy new one, Sheldon.

    Guy
    --
    "then came ye chavves, theyre cartes girded wyth candels
    blue, and theyre beastes wyth straynge horn-lyke thyngs
    onn theyre arses that theyre fartes be herde from myles
    around." Chaucer, the Sheppey Tales

  9. Happy New Year to you all. Thanks for your advice Sheldon and everyone else.
    I went straight down to my bike and sure enough, a stiff link.One of the
    pins wasn't right through. I used my chain splitter and pushed it through.
    Gaz
    "Tazlvr" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    I have a new bike. It has ShimanoDeore gears.When I'm on smaller sprockets
    the chain seems to slip a tooth. It does it randomly, not just when i'm
    putting a lot of pressure on it. I can't get to the bikeshop now until
    after new year. I went on to Sheldon Brown which said it's either a worn
    chain, which it obviously isn't or bent deurailler, which it isn't. Any
    ideas as to what it could be.
    TIA
    Gaz

  10. Simon Brooke said:

    Now that's an honour, lad, that most folk don't get.

    The great Sheldon answering your question himself.

    That's probably because Gaz claimed the information he needed wasn't on
    Capt. Bike's site when it was.

    --
    Dave...

    Every time I see an adult on a bicycle, I no longer despair for the
    future of the human race. - H. G. Wells

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.