I have a new bike. It has ShimanoDeore gears.When I'm on smaller sprockets
the chain seems to slip a tooth. It does it randomly, not just when i'm
putting a lot of pressure on it. I can't get to the bikeshop now until after
new year. I went on to Sheldon Brown which said it's either a worn chain,
which it obviously isn't or bent deurailler, which it isn't. Any ideas as to
what it could be.
TIA
Gaz
UK and Europe · Public discussion
Jumping chain.
This thread is locked and is currently read-only.
Thread navigation
Jump through the discussion
Go to the original post, the replies on this page, or the latest preserved contribution.
Thread details
What we know about this thread
- Original section
- UK and Europe
- Published
- 31 December 2004
- Last activity
- 1 January 2005
- Original author
- Tazlvr
- Posts
- 10
- Discussion status
- Public discussion
- Total views
- 551
- Views / 30 days
- 2
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
"Tazlvr" <[email hidden]> wrote in message
news:[email hidden]...Quoted message said:
I have a new bike. It has ShimanoDeore gears.When I'm on smaller sprockets
the chain seems to slip a tooth. It does it randomly, not just when i'm
putting a lot of pressure on it. I can't get to the bikeshop now until
after new year. I went on to Sheldon Brown which said it's either a worn
chain, which it obviously isn't or bent deurailler, which it isn't. Any
ideas as to what it could be.
TIA
Gaz
Check each link Gaz. Make sure they all pivot freely. If you find a stiff
link use sideways pressure to ease it off. -
"Tazlvr" <[email hidden]> wrote in message
news:[email hidden]...Quoted message said:
I have a new bike. It has ShimanoDeore gears.When I'm on smaller sprockets
the chain seems to slip a tooth. It does it randomly, not just when i'm
putting a lot of pressure on it. I can't get to the bikeshop now until
after new year. I went on to Sheldon Brown which said it's either a worn
chain, which it obviously isn't or bent deurailler, which it isn't. Any
ideas as to what it could be.
Other respondents' suggestions about stiff links are reasonable, especially
if it's a new bike. However, also make sure that any spacers are correctly
positioned in the cassette (you should be able to see if some sprockets are
much closer together than the others), that the teeth of the sprockets
concerned are not damaged (be careful, because Shimano HG sprockets are
oddly and irregularly shaped anyway), and even that there are no bolts
(mudguard fixing, e.g.) fouling the chain. -
in message <[email hidden]>,
(') said:
See: http://sheldonbrown.com/derailer-adjustment.html#stifflink
Coo!
Now that's an honour, lad, that most folk don't get.
The great Sheldon answering your question himself.
--
[email hidden] (Simon Brooke) http://www.jasmine.org.uk/~simon/
Windows 95:
You, you, you! You make a grown man cry...
M. Jagger/K. Richards -
"Tazlvr" <[email hidden]> wrote in message
news:[email hidden]...Quoted message said:
I have a new bike. It has ShimanoDeore gears.When I'm on smaller sprockets
the chain seems to slip a tooth. It does it randomly, not just when i'm
putting a lot of pressure on it. I can't get to the bikeshop now until
afterQuoted message said:
new year. I went on to Sheldon Brown which said it's either a worn chain,
which it obviously isn't or bent deurailler, which it isn't. Any ideas as
toQuoted message said:
what it could be.
New bike = cables settling in (possibly). Tighten the cable a quarter turn
at a time at the rear mech adjusment screw. Test to see if the bike shifts
smoothly.Else go to the basic method. Stick the bike in the second smallest rear cog
and turn the barrel adjuster until the chain just just just wants to skip up
to the next cog, then turn the barrel back one (or two) quarter turns (the
bike does need to be off the ground for this method).John
-
Eatmorepies said:
"Tazlvr" <[email hidden]> wrote in message
news:[email hidden]...Quoted message said:
I have a new bike. It has ShimanoDeore gears.When I'm on smaller
sprockets the chain seems to slip a tooth. It does it randomly, not
just when i'm putting a lot of pressure on it. I can't get to the
bikeshop now until after new year. I went on to Sheldon Brown which
said it's either a worn chain, which it obviously isn't or bent
deurailler, which it isn't. Any ideas as to what it could be.New bike = cables settling in (possibly). Tighten the cable a quarter
turn at a time at the rear mech adjusment screw. Test to see if the
bike shifts smoothly.My new bike used to skip, mainly on the smallest 2 rear cogs, and I thought
I had a dodgy rear casette, but I finally adjusted the cable tension and
that fixed it. -
Adrian Boliston said:
Eatmorepies said:
"Tazlvr" <[email hidden]> wrote in message
news:[email hidden]...Quoted message said:
I have a new bike. It has ShimanoDeore gears.When I'm on smaller
sprockets the chain seems to slip a tooth. It does it randomly, not
just when i'm putting a lot of pressure on it. I can't get to the
bikeshop now until after new year. I went on to Sheldon Brown which
said it's either a worn chain, which it obviously isn't or bent
deurailler, which it isn't. Any ideas as to what it could be.New bike = cables settling in (possibly). Tighten the cable a quarter
turn at a time at the rear mech adjusment screw. Test to see if the
bike shifts smoothly.My new bike used to skip, mainly on the smallest 2 rear cogs, and I thought
I had a dodgy rear casette, but I finally adjusted the cable tension and
that fixed it.
If it's new wait until after new year and go back to the shop. Don't
mess with stuff if it's their responsibility to fix it.
Hell it's only a day or two, can't you use an old bike or just make do?
Sniper8052 -
On 31 Dec 2004 08:52:17 -0800, [email hidden] wrote in
message <[email hidden]>:Quoted message said:
Sheldon "Very Large Website" Brown
LOL!
Hapy new one, Sheldon.
Guy
--
"then came ye chavves, theyre cartes girded wyth candels
blue, and theyre beastes wyth straynge horn-lyke thyngs
onn theyre arses that theyre fartes be herde from myles
around." Chaucer, the Sheppey Tales -
Happy New Year to you all. Thanks for your advice Sheldon and everyone else.
I went straight down to my bike and sure enough, a stiff link.One of the
pins wasn't right through. I used my chain splitter and pushed it through.
Gaz
"Tazlvr" <[email hidden]> wrote in message
news:[email hidden]...Quoted message said:
I have a new bike. It has ShimanoDeore gears.When I'm on smaller sprockets
the chain seems to slip a tooth. It does it randomly, not just when i'm
putting a lot of pressure on it. I can't get to the bikeshop now until
after new year. I went on to Sheldon Brown which said it's either a worn
chain, which it obviously isn't or bent deurailler, which it isn't. Any
ideas as to what it could be.
TIA
Gaz -
Simon Brooke said:
Now that's an honour, lad, that most folk don't get.
The great Sheldon answering your question himself.
That's probably because Gaz claimed the information he needed wasn't on
Capt. Bike's site when it was.--
Dave...Every time I see an adult on a bicycle, I no longer despair for the
future of the human race. - H. G. Wells
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.