UK and Europe · Public discussion

changing ratios

Started by Visionset · · Last activity · 62 posts · 2,880 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
UK and Europe
Published
8 May 2004
Last activity
13 May 2004
Original author
Visionset
Posts
62
Discussion status
Public discussion
Total views
2,880
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–20 of 62
Posts remain in their original chronological order.

Text size
  1. I have a 52/39 12/23 9 speed setup on my road bike.

    I think I need to change the 39 ring for a smaller one.

    I think it is practised by shimano et al to copy pro set
    ups. I'm not a pro ;-)

    I've heard that 52/39 is too small a jump to properly
    utilise 9 speed. I'd agree, it's all very nice having so
    many options 90% of the time, but I'm quite happy to trade
    that in to be happier for the 10% of the time!

    what is a good guess for the size I need [1], or do I go
    half way to the ratio I want and change the back block for a
    12/25 next time?

    Obviously this is going to be a compromise. I don't want to
    end up with 2 ranges and no overlap.

    [1] I know its almost an impossible question, but I haven't
    ridden anything with low ratios before, I've just got
    by. My hack is worse 52/42 14/24. As a guide I run out
    of gears at about a 1 in 8 (I think).

    --
    Mike W

  2. VisionSet said:

    I have a 52/39 12/23 9 speed setup on my road bike.

    I think I need to change the 39 ring for a smaller one.

    You'll only be able to fit a 38 to a 130mm PCD Shimano
    double chainset so it will not make a great deal of
    difference. You could fit a triple or a compact double with
    110mm PCD. Large rear sprockets will of course make a small
    difference too, Shimano road cassettes go up to 27.

    You have many options, the cost will probably dictate
    your choice.

  3. "MSeries" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:
    VisionSet said:

    I have a 52/39 12/23 9 speed setup on my road bike.

    I think I need to change the 39 ring for a smaller one.

    You'll only be able to fit a 38 to a 130mm PCD Shimano
    double chainset so


    it

    Quoted message said:

    will not make a great deal of difference. You could fit a
    triple or a compact double with 110mm PCD. Large rear
    sprockets will of course make a small difference too,
    Shimano road cassettes go up to 27.

    You have many options, the cost will probably dictate
    your choice.

    Doh, hadn't thought about the pcd limitation. I think I'll
    go for a new cassette and a new chain and swap between them
    depending on the terrain (obviously not en route!!)

    mmmm 12/25 or 12/27 both give me much lower than I've had
    before I'm tempted to go 12/25 as I know I'll miss the close
    ratio, but will it be low enough? Don't you just know it'll
    be wrong whichever I go for!

    --
    Mike W

  4. VisionSet said:

    mmmm 12/25 or 12/27 both give me much lower than I've had
    before I'm tempted to go 12/25 as I know I'll miss the
    close ratio, but will it be low enough?

    What a shame ShimaNO don't offer a 13/27. That'd be good,
    wouldn't it? I think you could make one up, though, one way
    or the other: Sprockets from more than one Shimano cassette
    and/or with one/some Marchisio* sprockets.

    * anysystem.deanysystem.de
    * www.parker-international.co.uk/components.htm

    Quoted message said:

    Don't you just know it'll be wrong whichever I go for!

    It won't be wrong, it just might not be right enough :-)

    ~PB

  5. VisionSet said:

    mmmm 12/25 or 12/27 both give me much lower than I've had
    before I'm tempted to go 12/25 as I know I'll miss the
    close ratio, but will it be low enough? Don't you just
    know it'll be wrong whichever I go for!

    39x25 will get you up most things, including the short 1 in
    6 out of my village, and the ratios on the 12-25 cassette
    are still close. If you live in the North Pennines you may
    want something lower.

  6. Zog The Undeniable said:
    VisionSet said:

    mmmm 12/25 or 12/27 both give me much lower than I've had
    before I'm tempted to go 12/25 as I know I'll miss the
    close ratio, but will it be low enough? Don't you just
    know it'll be wrong whichever I go for!

    39x25 will get you up most things, including the short 1
    in 6 out of my village, and the ratios on the 12-25
    cassette are still close. If you live in the North
    Pennines you may want something lower.

    [censored], why is it I can't do steep hills on a 30x25
    then? a 39x25 is a vaguely low-middling gear for me, not
    a very lowest one. I can only imagine you get up those
    hills by standing on the pedals and doing the high power
    low rpm thing!

    --

    Velvet

  7. Velvet <[email hidden]> wrote:

    : [censored], why is it I can't do steep hills on a 30x25
    : then? a 39x25 is a vaguely low-middling gear for me, not
    : a very lowest one. I can only imagine you get up those
    : hills by standing on the pedals and doing the high power
    : low rpm thing!

    Climbing speed = power to weight ratio. Even a small amount
    of extra weight makes a large difference to how much power
    you have to put out on a steep climb.

    Climbing style does come into it though - there comes a
    point where standing on the pedals is the only way to get
    up hills so it's worth practising, but many riders find
    they climb better this way anyway (at least for short
    sharp climbs)

    --
    Arthur Clune clune.orgclune.org "Technolibertarians make a
    philosophy out of a personality defect"
    - Paulina Borsook

  8. "Velvet" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:


    [censored], why is it I can't do steep hills on a 30x25
    then? a 39x25 is a vaguely low-middling gear for me, not
    a very lowest one. I can only imagine you get up those
    hills by standing on the pedals and doing the high power
    low rpm thing!

    I can relate to that. I was just in Switzerland for a week
    for a conference - only got to do half a day's cycling on a
    hired mtb and that too on the road - but I still had to get
    down onto the small ring going up a relatively short and not
    particularly steep mountain road, compared to some of the
    passes I might hope to do with a loaded bike this summer. It
    made me seriously wonder whether even the 30x32 I had
    planned to be using is going to be low enough, or whether I
    should give up now!

    Rich

  9. "Richard Goodman" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    It made me seriously wonder whether even the 30x32 I had
    planned to be using is going to be low enough, or whether
    I should give up now!

    Perhaps you should but the back sprockets on the front and
    the front on the back :-)

    --
    Mike W

  10. Zog The Undeniable said:

    39x25 will get you up most things

    With how much comfort and pleasure? Or is that nothing to do
    with cycling?

    ~PB

  11. "Richard Goodman" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    "Velvet" <[email hidden]> wrote in message news:Bsmnc.6257$6y2.59577492@news-
    text.cableinet.net...

    Quoted message said:


    [censored], why is it I can't do steep hills on a 30x25
    then? a 39x25 is a vaguely low-middling gear for me, not
    a very lowest one. I can only imagine you get up those
    hills by standing on the pedals and doing the high power
    low rpm thing!


    I can relate to that. I was just in Switzerland for a week
    for a conference - only got to do half a day's cycling on
    a hired mtb and that too on the road - but I still had to
    get down onto the small ring going up a relatively short
    and not particularly steep mountain road, compared to some
    of the passes I might hope to do with a loaded bike this
    summer. It made me seriously wonder whether even the 30x32
    I had planned to be using is going to be low enough, or
    whether I should give up now!

    There's a reason why even the hardcore roadies in
    Switzerland have triples. And you won't find a shop that
    stocks any road bikes with doubles at the front unless you
    look very hard.

    OTOH, if 30x32 isn't low enough then nothing is going to
    help.
    --
    Mark South Citizen of the World, Denizen of the Net <<Tiens!
    Ce poulet a une grenade!

  12. Mark South said:


    OTOH, if 30x32 isn't low enough then nothing is going
    to help.

    There's always my 24" gear (AKA 2 feet) which has never let
    me down. They are push bikes after all.

    Tony ;-)

  13. "Tony Raven" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:
    Mark South said:


    OTOH, if 30x32 isn't low enough then nothing is going
    to help.

    There's always my 24" gear (AKA 2 feet) which has never
    let me down. They are push bikes after all.

    30x32 is slighly over 24", so yes, the 2-foot gear is the
    next one down from that :-)

  14. Mark South said:

    "Tony Raven" <[email hidden]> wrote in message news:2g6ueaF4vlnjU1@uni-
    berlin.de...

    Quoted message said:
    Mark South said:


    OTOH, if 30x32 isn't low enough then nothing is going
    to help.

    There's always my 24" gear (AKA 2 feet) which has never
    let me down. They are push bikes after all.

    30x32 is slighly over 24", so yes, the 2-foot gear is the
    next one down from that :-)

    24.8"

  15. Mark South said:

    There's a reason why even the hardcore roadies in
    Switzerland have triples. And you won't find a shop that
    stocks any road bikes with doubles at the front unless you
    look very hard.

    OTOH, if 30x32 isn't low enough then nothing is going
    to help.

    I've been reading this thread with great interest, as a
    novice I'm pretty clueless when it comes to some of this
    technical stuff.

    I do know that climbing pitch hill from the steep-side in
    the surrey hills is bl**dy murder for me, but quite
    rewarding when I do get to the top.

    I've gone and counted the teeth on the chainring and rear
    cogs and can say that:

    Front chainrings 53 / 39. Rear cogs 11 through 25

    What do I need to replace to move from a double to a triple?

    Should I stick with my double (I am an "athletic" novice)
    and just keep training greater lactate tolerance until I can
    climb fast on a 39x25?

    Thanks for any advice, Mark

  16. injuryprone said:
    Mark South said:

    There's a reason why even the hardcore roadies in
    Switzerland have triples. And you won't find a shop that
    stocks any road bikes with doubles at the front unless
    you look very hard.

    OTOH, if 30x32 isn't low enough then nothing is going
    to help.

    I've been reading this thread with great interest, as a
    novice I'm pretty clueless when it comes to some of this
    technical stuff.

    I do know that climbing pitch hill from the steep-side in
    the surrey hills is bl**dy murder for me, but quite
    rewarding when I do get to the top.

    I've gone and counted the teeth on the chainring and rear
    cogs and can say that:

    Front chainrings 53 / 39. Rear cogs 11 through 25

    What do I need to replace to move from a double to a
    triple?

    Should I stick with my double (I am an "athletic" novice)
    and just keep training greater lactate tolerance until I
    can climb fast on a 39x25?

    Thanks for any advice, Mark

    You'll need new

    triple chainset bottom bracket shifters (unless you already
    have some that a double/triple compatible, Ultegra STi are)
    front mech

    you should but don't have to get

    new gear cable new chain

    Its up to you how much comfort you want. If you can manage
    all hills that you want to ride then why change. If you
    want to ride further and find you can't because the hills
    are taking too much out of you then go triple, thats what I
    have done.

  17. On Sun, 09 May 2004 09:02:25 GMT, Velvet <[email hidden]>

    wrote in message : said:

    [censored], why is it I can't do steep hills on a
    30x25 then?

    Not enough EPO?

    Guy
    --
    May contain traces of irony. Contents liable to settle after posting.
    chapmancentral.co.ukchapmancentral.co.uk

    88% of helmet statistics are made up, 65% of them at Washington University

  18. Just zis Guy said:

    On Sun, 09 May 2004 09:02:25 GMT, Velvet
    <[email hidden]> wrote in message <Bsmnc.6257$6y2.59577492@news-
    text.cableinet.net>:

    Quoted message said:

    [censored], why is it I can't do steep hills on a
    30x25 then?

    Not enough EPO?

    Hmm :-) I always translate that as 'Evening Primrose Oil' -
    since the EPO abbreviation's meant that to me for far longer
    than anything to do with cycling...

    --

    Velvet

  19. On Sun, 09 May 2004 18:06:21 GMT, Velvet <[email hidden]>

    wrote in message : said:
    Quoted message said:
    Quoted message said:

    [censored], why is it I can't do steep hills on a
    30x25 then?


    Not enough EPO?

    Quoted message said:

    Hmm :-) I always translate that as 'Evening Primrose Oil' -
    since the EPO abbreviation's meant that to me for far
    longer than anything to do with cycling...

    That'll be why I'm not as fast as Lance, then. I'm off to
    the Body Shop...

    Guy
    --
    May contain traces of irony. Contents liable to settle after posting.
    chapmancentral.co.ukchapmancentral.co.uk

    88% of helmet statistics are made up, 65% of them at Washington University

  20. Just zis Guy said:


    That'll be why I'm not as fast as Lance, then. I'm off to
    the Body Shop...

    Save your time Guy, they just look puzzled and sorry for you
    if you say you'd like to buy a new body ;-)

    Tony

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.