Mountain Bikes · Public discussion

Powerlink failure

Started by Tcmedara · · Last activity · 7 posts · 896 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Mountain Bikes
Published
17 June 2004
Last activity
18 June 2004
Original author
Tcmedara
Posts
7
Discussion status
Public discussion
Total views
896
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–7 of 7
Posts remain in their original chronological order.

Text size
  1. As I was doing a bit of maintenance on the FS ride this
    afternoon, I noticed a clicking sound associated with the
    chain passing over the rings. Upon closer examination I
    noticed one of the sideplates on the 9sp powerlink was
    horribly bent. I tried several means to remove it, but ended
    up having to pop a pin and install a new chain.

    I distinctly remember a bizarre episode of chain suck last
    weekend. This is a rare occurance and is usually a sign that
    it's time to lube up again. I'm wondering if the chainsuck
    episode was a result of the bent sideplate or was the cause.
    The powerlink was the only damaged link on the chain so I
    suspect that it failed first and caused the chainsuck
    problem. Either that or it's just coincidence that the
    powerlink was the one part of the chain that took the brunt
    of the abuse.

    I've been using SRAM chains w/ the powerlink for years
    and never had one fail before. Any similar experiences
    or comments?

    Tom

  2. tcmedara said:

    As I was doing a bit of maintenance on the FS ride this
    afternoon, I noticed a clicking sound associated with the
    chain passing over the rings. Upon closer examination I
    noticed one of the sideplates on the 9sp powerlink was
    horribly bent. I tried several means to remove it, but
    ended up having to pop a pin and install a new chain.

    You should have just taken it to the LBS, they'd have
    probably done it for free :^D

    --
    a.m-b FAQ: j-harris.netambfaq.htm

    b.bmx FAQ: t-online.debmx faq.htm

  3. tcmedara said:

    As I was doing a bit of maintenance on the FS ride this
    afternoon, I noticed a clicking sound associated with the
    chain passing over the rings. Upon closer examination I
    noticed one of the sideplates on the 9sp powerlink was
    horribly bent. I tried several means to remove it, but
    ended up having to pop a pin and install a new chain.

    I distinctly remember a bizarre episode of chain suck last
    weekend. This is a rare occurance and is usually a sign
    that it's time to lube up again. I'm wondering if the
    chainsuck episode was a result of the bent sideplate or
    was the cause. The powerlink was the only damaged link on
    the chain so I suspect that it failed first and caused the
    chainsuck problem. Either that or it's just coincidence
    that the powerlink was the one part of the chain that took
    the brunt of the abuse.

    I've been using SRAM chains w/ the powerlink for years and
    never had one fail before. Any similar experiences or
    comments?

    I had one of those snap in replacement chain links go on me
    a while back. Can't remember the make, whatever Halfords
    sell (only bike shop open on a Sunday).

  4. "tcmedara" <[email hidden]> wrote in message news:<dg7Ac.5515$cj3.3658@lakeread01>...

    Quoted message said:

    As I was doing a bit of maintenance on the FS ride this
    afternoon, I noticed a clicking sound associated with the
    chain passing over the rings. Upon closer examination I
    noticed one of the sideplates on the 9sp powerlink was
    horribly bent. I tried several means to remove it, but
    ended up having to pop a pin and install a new chain.

    I distinctly remember a bizarre episode of chain suck last
    weekend. This is a rare occurance and is usually a sign
    that it's time to lube up again. I'm wondering if the
    chainsuck episode was a result of the bent sideplate or
    was the cause. The powerlink was the only damaged link on
    the chain so I suspect that it failed first and caused the
    chainsuck problem. Either that or it's just coincidence
    that the powerlink was the one part of the chain that took
    the brunt of the abuse.

    I've been using SRAM chains w/ the powerlink for years and
    never had one fail before. Any similar experiences or
    comments?

    Tom

    Nope. Not even on my fixie.

    /s

  5. tcmedara said:

    As I was doing a bit of maintenance on the FS ride this
    afternoon, I noticed a clicking sound associated with the
    chain passing over the rings. Upon closer examination I
    noticed one of the sideplates on the 9sp powerlink was
    horribly bent. I tried several means to remove it, but
    ended up having to pop a pin and install a new chain.

    I distinctly remember a bizarre episode of chain suck last
    weekend. This is a rare occurance and is usually a sign
    that it's time to lube up again. I'm wondering if the
    chainsuck episode was a result of the bent sideplate or
    was the cause. The powerlink was the only damaged link on
    the chain so I suspect that it failed first and caused the
    chainsuck problem. Either that or it's just coincidence
    that the powerlink was the one part of the chain that took
    the brunt of the abuse.

    I've been using SRAM chains w/ the powerlink for years and
    never had one fail before. Any similar experiences or
    comments?

    Yes. One failed on me uncatastrophically, and I ended up
    reusing it. Until it fell off again going down some stairs.
    I put it back on. Fell off again, this time in gravel. Found
    it - put it back on. Fell off again. Found it and promptly
    went home.

    My roommate's PC-69 just plain snapped on him on a random
    link. He weighs 170 and wasn't really cranking it...

    --
    Phil, Squid-in-Training

  6. bomba said:
    tcmedara said:

    As I was doing a bit of maintenance on the FS ride this
    afternoon, I noticed a clicking sound associated with the
    chain passing over the rings. Upon closer examination I
    noticed one of the sideplates on the 9sp powerlink was
    horribly bent. I tried several means to remove it, but
    ended up having to pop a pin and install a new chain.

    You should have just taken it to the LBS, they'd have
    probably done it for free :^D

    I thought about it, but I didn't want to risk it. It may
    have sent Scottie 'round the bend even further. I settled
    for my 5% Club member discount.

    Tom

  7. tcmedara wrote:
    | As I was doing a bit of maintenance on the FS ride this
    | afternoon, I noticed a clicking sound associated with the
    | chain passing over the rings. Upon closer examination I
    | noticed one of the sideplates on the 9sp powerlink was
    | horribly bent. I tried several means to remove it, but
    | ended up having to pop a pin and install a new chain.
    |
    | I distinctly remember a bizarre episode of chain suck last
    | weekend. This is a rare occurance and is usually a sign
    | that it's time to lube up again. I'm wondering if the
    | chainsuck episode was a result of the bent sideplate or
    | was the cause. The powerlink was the only damaged link on
    | the chain so I suspect that it failed first and caused the
    | chainsuck problem. Either that or it's just coincidence
    | that the powerlink was the one part of the chain that took
    | the brunt of the abuse.
    |
    | I've been using SRAM chains w/ the powerlink for years and
    | never had one fail before. Any similar experiences or
    | comments?
    |
    | Tom

    You are the second person I've ever heard with a problem
    with them. Still, it's a "Weakest Link" kinda thing.

    Personally, I've always rivetted my chains, and I use mostly
    SRAM PC-58s (despite the instructions saying you can't do
    this, it works perfectly.)

    The only chain I've ever broken was a Sachs M-41(ancestor of
    the SRAM PC-48) on my Tandem that I pushed past its useful
    life. Ended up pushing/scootering the thing 9 miles home.

    ---
    __o _`\(,_ Cycling is life, (_)/ (_) all the rest,
    just details. The Nelson Paradigm =^o.o^=
    intergalax.comintergalax.com intbike.comintbike.com
    _______
    Checked by AVG anti-virus system
    (grisoft.comgrisoft.com). Version: 6.0.692 / Virus
    Database: 453 - Release Date: 5/28/2004

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.