Clicking in right pedal!

first make sure that the cranks and pedals are tight. I had a problem
on my unicycle with my left pedal, i heard a popping noise and felt
something popping in my pedal during a certain part in the rotation
sometimes. This only happened with odyssey pedals though. If
tightening the cranks and pedals doesnt fix the problem try using
different pedals.

--
siafirede - straight edge in your face
------------------------------------------------------------------------
siafirede's Profile: http://www.unicyclist.com/profile/6057
View this thread: http://www.unicyclist.com/thread/37716

Yeah, I had that same problem with my pedals. I think they have cheap
ball bearings in them that are moving around and are stuck in places
inside the pedal, which explains why they're clicking. I squirted a lot
of WD40 inside the pedal and after riding for a long time the clicking
went away. If it gets really annoying just buy new pedals.

Don't know what to say about your wobbling wheel.

-Lee

--
leeman180 - Unicycling Newbie
------------------------------------------------------------------------
leeman180's Profile: http://www.unicyclist.com/profile/8441
View this thread: http://www.unicyclist.com/thread/37716

I don't know about the odysses, but most pedals you can at least take
the end-cap off, and tighten the bearings up. it's very difficult to get
it just right, it doesn't want to be too tight or it'll be harder to
ride, and it'll trash the bearings just as fast. too loose and they'll
just come straight undone again.

alternatively you could just buy some new ones...

--
theamazingmolio - A Unicylist, a juggler, and a prat

Luke Duller ([email hidden])
Never trust anything you read on the internet
'~*~*Random Forums*~*~ ' (www.randomforums.tk)

------------------------------------------------------------------------
theamazingmolio's Profile: http://www.unicyclist.com/profile/5931
View this thread: http://www.unicyclist.com/thread/37716

Check and make sure that the main cap bearing holders are tight enough.
I had the same problem when I got a new uni. I thought that it was tight
enough. I tighened it a little and _that_ problem went away.

If that doesn't do it, It could be that the pedals need to be taken
apart and regreased. I realize that it is a new uni, but, that's what I
had to do on my Nimbus muni. The symptom that I had was more of a
clunking rather than a click.

Good luck, either way. _that_

--
One on one - Hooked on fun fix

"I don't care who you are, that's funny!" Larry the Cable Guy
------------------------------------------------------------------------
One on one's Profile: http://www.unicyclist.com/profile/5740
View this thread: http://www.unicyclist.com/thread/37716

This might be kinda obvious or stupid, but I have a loose reflector on
my Uni that makes a clicking every once in a while. It might just be
that.

--
Diznei - U of I Juggler and Unicycler
------------------------------------------------------------------------
Diznei's Profile: http://www.unicyclist.com/profile/8959
View this thread: http://www.unicyclist.com/thread/37716

I have a nimbus Muni that has a clicking left pedal. So far I've assumed
it was the pedal clicking on the deep thread of my riding shoes. I'll
have to check it carefully. (It's too cold, ~15 degrees F, for me to
want to ride now. )

--
Chrashing - Just Lucky

Regards,
Chrashing
------------------------------------------------------------------------
Chrashing's Profile: http://www.unicyclist.com/profile/7501
View this thread: http://www.unicyclist.com/thread/37716

clicking and a loose wheel sounds whole lot like a slightly loose crank
to me.

--
Seager - that one guy who does that stuff

'Team RoadShow' (http://www.teamroadshow.com)
------------------------------------------------------------------------
Seager's Profile: http://www.unicyclist.com/profile/8840
View this thread: http://www.unicyclist.com/thread/37716

Clicking on my shoe tread was not the problem,

I did as siafirede suggested and tightened the right pedal to the crank.
The pedal didn't feel loose, but it was about a quarter turn less than
tight.

No more clicking for me 🙂 .

Tylercox, did you fix your click?

--
Chrashing - Just Lucky

Regards,
Chrashing
------------------------------------------------------------------------
Chrashing's Profile: http://www.unicyclist.com/profile/7501
View this thread: http://www.unicyclist.com/thread/37716

I think its your crank that are loose. I got the same thing on my
Nimbus. I tried to tighten it a few times but it keeps comin loose.🙁

--
fexnix - Level 4 here i come!

RECYCLE YOUR UNICYCLE!
'*My fresh gallery*' (http://gallery.unicyclist.com/Fexnix-album)
------------------------------------------------------------------------
fexnix's Profile: http://www.unicyclist.com/profile/7381
View this thread: http://www.unicyclist.com/thread/37716

my Nimbus X creeks even with upgraded cranks. and everyone i know who
has a nimbus cranks do creek

--
die-hard uni - Electic Wizard

"I already gave my best. I have no regrets at all." -William Hung
------------------------------------------------------------------------
die-hard uni's Profile: http://www.unicyclist.com/profile/6457
View this thread: http://www.unicyclist.com/thread/37716

die-hard uni said:

*my Nimbus X creeks even with upgraded cranks. and everyone i know who
has a nimbus cranks do creek *

None of the square taper hubs I have ever squeak. You better make sure
there is some grease between the crank and the hub and make sure it's on
tight. Aluminum cranks need to be tightened every few rides.

--
daino149 - On Vacation - till i find a job

Check out my 'pics ' (http://www.unicyclist.com/gallery/daino)
'My X-a-n-g-a' (http://www.xanga.com/home.aspx?user=fingerpies)
I need to find a job
------------------------------------------------------------------------
daino149's Profile: http://www.unicyclist.com/profile/933
View this thread: http://www.unicyclist.com/thread/37716