Cycling Equipment · Public discussion

cleat problem (again)

Started by Ns> · · Last activity · 7 posts · 686 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
8 July 2003
Last activity
11 July 2003
Original author
Ns>
Posts
7
Discussion status
Public discussion
Total views
686
Views / 30 days
0
Topics

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–7 of 7
Posts remain in their original chronological order.

Text size
  1. Here's the scoop... I have some 7 year old Sidi shoes that I still wear (only because I have no
    money for new ones). The Look red cleat on the left shoe gets loose often and of course I have to
    tighten them. The screws seem to come loose and the cleat swivels enough to make my foot hurt at the
    end or near the end of every ride. The newish cleat upon removal still has the teats (for lack of a
    better word) all around the edge as it's suposed to. The shoe however has pits where the cleat teats
    are supposed to rest that have been widened by the constant swivel action and are way out of what
    spec should be.

    I have tried to fix the cleat just prior to this post by (wait and hear me out) applying a thin
    layer of a strong automobile epoxy to the bottom of the shoe where the teats rest. I only applied a
    very thin layer and only where the teats rest. Of course this was done with the cleat off of the
    shoe and no epoxy was applied to the screw holes.

    I guess my question is... Am I just going to have to break down and buy another pair shoes? Has
    anyone ever tried fixing a shoe like this? And even though the cleats look good still and have the
    toe ridge ...Are the cleats bad?

    NS

  2. "Felix qui potuit rerum cognoscere causas." (Vergil)

    NS said:

    The Look red cleat on the left shoe gets loose often and of course I have to tighten them. The
    screws seem to come loose and the cleat swivels enough to make my foot hurt at the end or near the
    end of every ride.

    The screws you're using may be too long, allowing them to bottom out against the sole before they
    make the cleats fast. Try a set of slightly shorter fasteners.

    -------------------------------
    businesscycles.combusinesscycles.com John Dacey Business Cycles, Miami, Florida 305-273-4440 Now in our
    twentieth year. Our catalog of track equipment: seventh year online
    -------------------------------

  3. Have yiou tried Loktite on the screw threads to prevent them from loosening?

    May you have the wind at your back. And a really low gear for the hills! Chris

    Chris'Z Corner "The Website for the Common Bicyclist": geocities.comczcorner

  4. NS> at [email hidden] wrote on 7/8/03 9:20 AM:

    Quoted message said:

    Here's the scoop... I have some 7 year old Sidi shoes that I still wear (only because I have no
    money for new ones). The Look red cleat on the left shoe gets loose often and of course I have to
    tighten them. The screws seem to come loose and the cleat swivels enough to make my foot hurt at
    the end or near the end of every ride. The newish cleat upon removal still has the teats (for lack
    of a better word) all around the edge as it's suposed to. The shoe however has pits where the
    cleat teats are supposed to rest that have been widened by the constant swivel action and are way
    out of what spec should be.


    <snipped>

    Quoted message said:

    I guess my question is... Am I just going to have to break down and buy another pair shoes? Has
    anyone ever tried fixing a shoe like this? And even though the cleats look good still and have the
    toe ridge ...Are the cleats bad?

    If it's been happening with other cleats, then you've answered your own questions.

    But, let's focus on the pedals for a sec... How tightly do you have the release tension set? It's
    surprising that you could generate enough torque against the cleat to loosen it without popping
    your foot out.

    If it's just this set of cleats I'd try some blue locTite first. I'm not sure the screws could
    bottom out without feeling them through the sole.

    Also, if you are getting that much rotation in your foot, you might want to make sure you are
    positioned efficiently on the bike. Don't discount other mechanical causes - you could have a slight
    bend in the BB axle you've gotten used to, causing a different rotation on that foot/pedal.

    Hope that helps -

    -- Jim

  5. JDacey-<< "Felix qui potuit rerum cognoscere causas." (Vergil) >><BR><BR>

    Ya know you ought to translate these quotes(another from Cicero) for us unwashed, uneducated
    horde who's exposure to Latin is limited to watching 'Galdiator'...Did they speak Latin then or
    Italian or what??

    Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
    (303)440-3535 vecchios.comvecchios.com "Ruote convenzionali costruite eccezionalmente bene"

  6. "Quidquid bonum est tua, tua est bonum." - (P. Chisholm) "What is good for you, is good for you." On

    10 Jul 2003 12:56:14 GMT said:

    JDacey-<< "Felix qui potuit rerum cognoscere causas." (Vergil) >><BR><BR>

    Ya know you ought to translate these quotes(another from Cicero) for us unwashed, uneducated horde
    who's exposure to Latin is limited to watching 'Galdiator'...Did they speak Latin then or Italian
    or what??

    Felix = happy; qui = who; potuit = he is able; rerum = of things; cognoscere = to know, learn;
    causas = causes. So you have: Happy is he who is able to learn the causes of things.

    - - - - - - - - - - - - - - - John Dacey Business Cycles Miami, Florida 305-273-4440
    businesscycles.combusinesscycles.com
    - - - - - - - - - - - - - - -

  7. "Rident stolidi verba Latina." - Ovid

    (Qui si parla Campagnolo) said:

    John-<< So you have: Happy is he who is able to learn the causes of things.

    Quoted message said:
    Quoted message said:

    <BR><BR>

    Otay, Maybe your talents are being wasted in the bike biz..

    Do I detect that you're encouraging me to find a new line of work?

    Quoted message said:


    BUT did they speak Latin or Italian during the times of Claudius Maximus???

    As I understand it, the language that became known as "Italian" emerged in the 1200s and 1300s in
    the area around Florence. Your Clavdivs Maximvs was a Roman, and would have spoken Latin.
    ---------------------------------------------------
    John Dacey Business Cycles, Miami, Florida 305-273-4440 Now in our twentieth year. Our catalog of
    track equipment: seventh year online businesscycles.combusinesscycles.com
    ---------------------------------------------------

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.