Cycling Equipment · Public discussion

Bottom Bracket Clicking

Started by anthonyjf · · Last activity · 6 posts · 1,644 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
29 September 2004
Last activity
2 October 2004
Original author
anthonyjf
Posts
6
Discussion status
Public discussion
Total views
1,644
Views / 30 days
1

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–6 of 6
Posts remain in their original chronological order.

Text size
  1. I brought my Trek 1000 to my LBS because of a clicking noise coming from the bottom bracket. The tech over-hauled the bottom bracket, but when I got the bike home and rode it, it still made the clicking noise. The bike is only a few months old, and the ride does not seem to be affected by the clicking. The pedals are new looks, so I don't think they are the problem. The crankset is the standard Bontrager that comes with the bike. So far, the bike has been a good entry level bike, but the clicking concerns me. Any input or suggestions would be appreciated.

  2. anthonyjf said:

    I brought my Trek 1000 to my LBS because of a clicking noise coming from the bottom bracket. The tech over-hauled the bottom bracket, but when I got the bike home and rode it, it still made the clicking noise. The bike is only a few months old, and the ride does not seem to be affected by the clicking. The pedals are new looks, so I don't think they are the problem. The crankset is the standard Bontrager that comes with the bike. So far, the bike has been a good entry level bike, but the clicking concerns me. Any input or suggestions would be appreciated.

    My guess is this is unlikely to help, and for that I apologize, but for the sake of at least throwing it out there - at some point I was hearing such a clicking noise, too, and it sometimes seemed to be coming from the bottom bracket area. Eventually I figured out that it was my headset. This is an older Cannondale with a threaded steel headset that uses 2 rings of ball bearings on either side (top and bottom). The times I've heard the noises either the bearings needed to be greased or, the most recent time it happened, I had actually basically crumbled the ball bearing ring, which promptly fell apart as soon as I took apart the stem and headset.

    Weird how sounds can project themselves like that (it really sounds like it's coming from the bottom, or even the rear - near the rear derailler - of the bike). So, maybe check the headset? I dunno, like I said, doubt this will help, but just throwing a suggestion out there. Good luck!

  3. I'll check the headset. Until I figure it out, I'll keep on clicking... I mean riding. 😉

  4. Just a thought:
    I experienced what I thought was a clicking bottom bracket, but I finally traced it to a loose pedal. Loosen and retighten both pedals just to make sure.🙂

  5. Check that your chainring bolts are all tight.

  6. I had the exact same problem with my Campagnolo Centaur Bottom Bracket. Everytime I set al my force on my pedals the bottom bracket was clicking. A solution should be buying a new one. Form me the solution was asking the club I am in for a new bike. So pick you choice: New bracket or new bike 🙂

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.