I brought my Trek 1000 to my LBS because of a clicking noise coming from the bottom bracket. The tech over-hauled the bottom bracket, but when I got the bike home and rode it, it still made the clicking noise. The bike is only a few months old, and the ride does not seem to be affected by the clicking. The pedals are new looks, so I don't think they are the problem. The crankset is the standard Bontrager that comes with the bike. So far, the bike has been a good entry level bike, but the clicking concerns me. Any input or suggestions would be appreciated.
Cycling Equipment · Public discussion
Bottom Bracket Clicking
This thread is locked and is currently read-only.
Thread navigation
Jump through the discussion
Go to the original post, the replies on this page, or the latest preserved contribution.
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 29 September 2004
- Last activity
- 2 October 2004
- Original author
- anthonyjf
- Posts
- 6
- Discussion status
- Public discussion
- Total views
- 1,644
- Views / 30 days
- 0
- Topics
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
anthonyjf said:
I brought my Trek 1000 to my LBS because of a clicking noise coming from the bottom bracket. The tech over-hauled the bottom bracket, but when I got the bike home and rode it, it still made the clicking noise. The bike is only a few months old, and the ride does not seem to be affected by the clicking. The pedals are new looks, so I don't think they are the problem. The crankset is the standard Bontrager that comes with the bike. So far, the bike has been a good entry level bike, but the clicking concerns me. Any input or suggestions would be appreciated.
My guess is this is unlikely to help, and for that I apologize, but for the sake of at least throwing it out there - at some point I was hearing such a clicking noise, too, and it sometimes seemed to be coming from the bottom bracket area. Eventually I figured out that it was my headset. This is an older Cannondale with a threaded steel headset that uses 2 rings of ball bearings on either side (top and bottom). The times I've heard the noises either the bearings needed to be greased or, the most recent time it happened, I had actually basically crumbled the ball bearing ring, which promptly fell apart as soon as I took apart the stem and headset.
Weird how sounds can project themselves like that (it really sounds like it's coming from the bottom, or even the rear - near the rear derailler - of the bike). So, maybe check the headset? I dunno, like I said, doubt this will help, but just throwing a suggestion out there. Good luck!
-
I'll check the headset. Until I figure it out, I'll keep on clicking... I mean riding. 😉
-
Just a thought:
I experienced what I thought was a clicking bottom bracket, but I finally traced it to a loose pedal. Loosen and retighten both pedals just to make sure.🙂 -
Check that your chainring bolts are all tight.
-
I had the exact same problem with my Campagnolo Centaur Bottom Bracket. Everytime I set al my force on my pedals the bottom bracket was clicking. A solution should be buying a new one. Form me the solution was asking the club I am in for a new bike. So pick you choice: New bracket or new bike 🙂
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.