Spacing question...

jwhip said:

I have a newer steel cross frame with 130mm rear drop-out spacing that I'd
like to put an older 6 speed (120mm) freewheel in. Can I safely "force"

the

Quoted message said:

spacing in on the frame to fit this more narrow rear hub? The 6 speed
cassette will be my primary gearing choice, but I may swap it out
occasionally for a 9 speed wheel now and again.

The standard 6-sp setup was 126 mm. The Narrow "Ultra 6" and standard 5-sp
was 120mm. Are you sure your's is 120mm?

I think you'd be better off using spacers on your 6-sp hub than to force it
into the 130mm dropouts.

Art Harris

It would be more sensible to leave the frame as it is and use a longer axle
for your wheel, placing spacers on the non-drive side and centring the rim
to the hubshell.
TJ

jwhip wrote in message ...

Quoted message said:

I have a newer steel cross frame with 130mm rear drop-out spacing that I'd
like to put an older 6 speed (120mm) freewheel in. Can I safely "force"

the

Quoted message said:

spacing in on the frame to fit this more narrow rear hub? The 6 speed
cassette will be my primary gearing choice, but I may swap it out
occasionally for a 9 speed wheel now and again. Thanks for any help!

Arthur Harris said:

jwhip said:

I have a newer steel cross frame with 130mm rear drop-out spacing that I'd
like to put an older 6 speed (120mm) freewheel in. Can I safely "force"

the

Quoted message said:

spacing in on the frame to fit this more narrow rear hub? The 6 speed
cassette will be my primary gearing choice, but I may swap it out
occasionally for a 9 speed wheel now and again.

The standard 6-sp setup was 126 mm. The Narrow "Ultra 6" and standard 5-sp
was 120mm. Are you sure your's is 120mm?

I think you'd be better off using spacers on your 6-sp hub than to force it
into the 130mm dropouts.

Seconded. Just add spacers. While you're at it, I would make the wheel
dishless - there should be enough space. You *may* need a longer BB
to keep the chainline perfect.

jwhip said:

I have a newer steel cross frame with 130mm rear drop-out spacing that I'd
like to put an older 6 speed (120mm) freewheel in. Can I safely "force" the
spacing in on the frame to fit this more narrow rear hub? The 6 speed
cassette will be my primary gearing choice, but I may swap it out
occasionally for a 9 speed wheel now and again. Thanks for any help!

Don't force the frame, get a longer axle shaft and add spacers to your
hub.
--
Typoes are a feature, not a bug.
Some gardening required to reply via email.
Words processed in a facility that contains nuts.

jwhip-<< I have a newer steel cross frame with 130mm rear drop-out spacing that
I'd
like to put an older 6 speed (120mm) freewheel in. Can I safely "force" the
spacing in on the frame to fit this more narrow rear hub? >><BR><BR>

Not 'safely' Just get a longer axle and a handfull of axle spacers, make the
hub 130mm...easy to do.
Better that potentially killin yer frame.

Peter Chisholm
Vecchio's Bicicletteria
1833 Pearl St.
Boulder, CO, 80302
(303)440-3535
http://www.vecchios.com
"Ruote convenzionali costruite eccezionalmente bene"