UK and Europe · Public discussion

Built my first wheel

Started by Simonb · · Last activity · 6 posts · 562 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
UK and Europe
Published
21 March 2004
Last activity
21 March 2004
Original author
Simonb
Posts
6
Discussion status
Public discussion
Total views
562
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–6 of 6
Posts remain in their original chronological order.

Text size
  1. Sort of like a rite of passage, ain't it?

    After cracking my rear hub the other day. I decided to have
    a go at wheelbuilding (Sheldon's own recipe at
    sheldonbrown.comwheelbuild.html).

    Here's my wheel: widerworld.co.uknew wheel.jpg

    New hub, old spokes and rim.

    I only made one mistake: I laced one leading spoke over its
    second trailing spoke (like I know what I'm talking about!).

    Now it 's working, I'm off out.

    Simon

  2. And here's my overworked and underpaid assistant checking spoke tension:

    widerworld.co.ukassistant.jpg

    Simon

  3. Jon Senior said:

    Hope it holds up.

    Don't say that!

  4. In article <[email hidden]>,
    [email hidden] says...

    Quoted message said:

    Here's my wheel: widerworld.co.uknew wheel.jpg

    New hub, old spokes and rim.

    I only made one mistake: I laced one leading spoke over
    its second trailing spoke (like I know what I'm talking
    about!).

    Now it 's working, I'm off out.

    Simon

    What do you think of the Zaffiro's? I reckon they are
    bloody good value for money, even though I struggle to get
    them on the rim!

    I'm still on the set that I put on pre-winter..still got
    loads of k's in them yet. £24 for four from Ribbles,
    including 4 tubes!. a bargain as far as I'm concerned.

    --
    Mark (MSA) This post is packaged by intellectual weight, not
    volume. Some settling of contents may have occurred during
    transmission

  5. MSA said:

    What do you think of the Zaffiro's? I reckon they are
    bloody good value for money, even though I struggle to get
    them on the rim!

    I got them a couple of weeks ago (they've commuted 16
    miles/day and done one 200k Audax in that time), they
    replaced a pair of worn-out cheapo Michelins I got from
    Halfords at the start of winter. They have *much* more grip
    than the Michelins and feel more comfortable despite running
    at 120psi. Must be the design/compound.

    ps, They weren't cheap at £17 each from my LBS. The perils
    of impulse buying!

  6. "Jon Senior" <jon@restless_REMOVE_lemon.co.uk> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    I've been riding on them for about 4 weeks now and the
    roads round here


    make

    Quoted message said:

    the off-road tracks near my parents look smooth. Both
    still seem to be holding up nicely. Even immediately after
    the course, I still had the feeling that anything I built
    could never be as good as the wheels sold in the shop, but
    the further I ride without a failure the better I feel
    about them.

    I built a pair of disc hubbed mtb wheels over xmas (not my
    first) and must admit to a bit of trepidation before their
    first hard ride but now after quite a few rides bombing down
    the best of the Peak District supporting my 80+ kgs they're
    fine. All a matter of self-belief that you're as capable as
    anyone at building decent wheels.
    --
    Regards, Pete

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.