I've got a giant rincon, 4-5 years old. The cable boot
thingy that screws into the rear derailleur is stripped out.
I guess it would be easiest to just replace it. 21 speed,
rear d is shimano acera-x. I've been looking online, but
don't really know of what I need toppull, bottompull? So
many choices... Can someone suggest something comparable
that'll be ok with the altus front derailleur? any help
would be greatly appreciated.
Mountain Bikes · Public discussion
derailleur replacement?
This thread is locked and is currently read-only.
Thread navigation
Jump through the discussion
Go to the original post, the replies on this page, or the latest preserved contribution.
Thread details
What we know about this thread
- Original section
- Mountain Bikes
- Published
- 10 March 2004
- Last activity
- 11 March 2004
- Original author
- Joaquino
- Posts
- 8
- Discussion status
- Public discussion
- Total views
- 759
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
joaquino said:
I've got a giant rincon, 4-5 years old. The cable boot
thingy that screws into the rear derailleur is stripped
out. I guess it would be easiest to just replace it. 21
speed, rear d is shimano acera-x. I've been looking
online, but don't really know of what I need toppull,
bottompull? So many choices... Can someone suggest
something comparable that'll be ok with the altus front
derailleur? any help would be greatly appreciated.Rear derailleurs don't come in top-pull/bottom pull/etc., so
no need to worry about that.Does your current one work OK? If only the rubber boot
thingy is shot, then just keep riding. (Your cable may have
gotten globbed up with dirt, so you might need to replace it
and/or some housing.) If you *do* need a new RD, then go
ahead and upgrade a bit to, say, LX. Don't think you *have*
to find a 7-speed, as AFAIK an 8- or even 9-speed will work
fine. (Someone correct me if I'm mistaken.)As long as your FD is working fine, don't worry about
"matching" the component level with the new rear one. Lots
of people have different grade derailleurs -- usually better
rear than front -- with no problems at all.Bill "HTH" S.
-
"joaquino" <[email hidden]> wrote in message
"]news:[email hidden]...Quoted message said:
I've got a giant rincon, 4-5 years old. The cable boot
thingy that screws into the rear derailleur is stripped
out. I guess it would be easiest to just replace it. 21
speed, rear d is shimano acera-x. I've been looking
online, but don't really know of what I need toppull,
bottompull? So many choices... Can someone suggest
something comparable that'll be ok with
theQuoted message said:
altus front derailleur? any help would be greatly
appreciated.Without having seen the rear mech, you probably don't
need a replacement...maybe an experienced tweak, maybe a
small part. Take it to a bike shop and see what they say
- make sure you tell them you want to spend as little
money as possible.If you do replace, know a few things: -every current
Shimano rear derailleur will work on your ride. -
Toppull/Bottompull does not apply to rear mechs. -The front
derailleur and rear derailleur are independent of each
other. -if your bike came with acera-x, you wouldn't want
any mech better than a Deore (not Deore LX or XT
either...plain Deore) It's more than enough for your type
of riding, and anything else would be overkill.Chris
-
Get your hands on a Deore or a LX rear derailler. If your
mechanic inclined, you can do it yourself. Make sure you use
a new cable.I MTB 2004
-
thanks to all who replied. I've got the thing mostly taken apart in the
spare bedroom cause I had to put new tires on, otherwise might not have
noticed something was wrong. Anyhoo, will check out the mentioned shimano
derailleurs.
thanks again.
joaquino <[email hidden]> wrote in message
"]news:[email hidden]...Quoted message said:
I've got a giant rincon, 4-5 years old. The cable boot
thingy that screws into the rear derailleur is stripped
out. I guess it would be easiest to just replace it. 21
speed, rear d is shimano acera-x. I've been looking
online, but don't really know of what I need toppull,
bottompull? So many choices... Can someone suggest
something comparable that'll be ok with
theQuoted message said:
altus front derailleur? any help would be greatly
appreciated. -
joaquino said:
I've got a giant rincon, 4-5 years old. The cable boot
thingy that screws into the rear derailleur is stripped
out. I guess it would be easiest to just replace it. 21
speed, rear d is shimano acera-x. I've been looking online,
but don't really know of what I need toppull, bottompull?
So many choices... Can someone suggest something comparable
that'll be ok with the altus front derailleur? any help
would be greatly appreciated.get some tin snips and snip that sh!t off!
SS baby SS, Bill The mind serves properly as a window glass
rather than as a reflector, that is, the mind should give an
immediate view instead of an interpretation of the world.
:-] -
joaquino said:
I've got a giant rincon, 4-5 years old. The cable boot
thingy that screws into the rear derailleur is stripped
out. I guess it would be easiest to just replace it. 21
speed, rear d is shimano acera-x. I've been looking
online, but don't really know of what I need toppull,
bottompull? So many choices... Can someone suggest
something comparable that'll be ok with the altus front
derailleur? any help would be greatly appreciated.If it's just the little dirt cover, don't sweat it. You
should be able to get another one at your LBS if you feel
the need. Otherwise, I'm not entirely clear what part you're
talking about and I'm too lazy to go to the garage and look
to figure it out... Anyway, lots of good advice in previous
responses. If you feel inclined, you may find what you're
looking for at "Loose Screws" here tinyurl.com2dzygOpen ↗You can also get a decent replacement for around US $20-25
if you feel the need for an all out replacement. Try
Pricepoint, Nashbar, Jensen, or even your LBS if you wanna
shop local.Tom
-
Bill Wheeler <[email hidden]> had this to say
"]news:[email hidden]Quoted message said:
get some tin snips and snip that sh!t off!SS baby SS, Bill The mind serves properly as a window
glass rather than as a reflector, that is, the mind
should give an immediate view instead of an
interpretation of the world.
:-]"yawn*
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.