Mountain Bikes · Public discussion

derailleur replacement?

Started by Joaquino · · Last activity · 8 posts · 759 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Mountain Bikes
Published
10 March 2004
Last activity
11 March 2004
Original author
Joaquino
Posts
8
Discussion status
Public discussion
Total views
759
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–8 of 8
Posts remain in their original chronological order.

Text size
  1. I've got a giant rincon, 4-5 years old. The cable boot
    thingy that screws into the rear derailleur is stripped out.
    I guess it would be easiest to just replace it. 21 speed,
    rear d is shimano acera-x. I've been looking online, but
    don't really know of what I need toppull, bottompull? So
    many choices... Can someone suggest something comparable
    that'll be ok with the altus front derailleur? any help
    would be greatly appreciated.

  2. joaquino said:

    I've got a giant rincon, 4-5 years old. The cable boot
    thingy that screws into the rear derailleur is stripped
    out. I guess it would be easiest to just replace it. 21
    speed, rear d is shimano acera-x. I've been looking
    online, but don't really know of what I need toppull,
    bottompull? So many choices... Can someone suggest
    something comparable that'll be ok with the altus front
    derailleur? any help would be greatly appreciated.

    Rear derailleurs don't come in top-pull/bottom pull/etc., so
    no need to worry about that.

    Does your current one work OK? If only the rubber boot
    thingy is shot, then just keep riding. (Your cable may have
    gotten globbed up with dirt, so you might need to replace it
    and/or some housing.) If you *do* need a new RD, then go
    ahead and upgrade a bit to, say, LX. Don't think you *have*
    to find a 7-speed, as AFAIK an 8- or even 9-speed will work
    fine. (Someone correct me if I'm mistaken.)

    As long as your FD is working fine, don't worry about
    "matching" the component level with the new rear one. Lots
    of people have different grade derailleurs -- usually better
    rear than front -- with no problems at all.

    Bill "HTH" S.

  3. "joaquino" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    I've got a giant rincon, 4-5 years old. The cable boot
    thingy that screws into the rear derailleur is stripped
    out. I guess it would be easiest to just replace it. 21
    speed, rear d is shimano acera-x. I've been looking
    online, but don't really know of what I need toppull,
    bottompull? So many choices... Can someone suggest
    something comparable that'll be ok with


    the

    Quoted message said:

    altus front derailleur? any help would be greatly
    appreciated.

    Without having seen the rear mech, you probably don't
    need a replacement...maybe an experienced tweak, maybe a
    small part. Take it to a bike shop and see what they say
    - make sure you tell them you want to spend as little
    money as possible.

    If you do replace, know a few things: -every current
    Shimano rear derailleur will work on your ride. -
    Toppull/Bottompull does not apply to rear mechs. -The front
    derailleur and rear derailleur are independent of each
    other. -if your bike came with acera-x, you wouldn't want
    any mech better than a Deore (not Deore LX or XT
    either...plain Deore) It's more than enough for your type
    of riding, and anything else would be overkill.

    Chris

  4. Get your hands on a Deore or a LX rear derailler. If your
    mechanic inclined, you can do it yourself. Make sure you use
    a new cable.

    I MTB 2004

  5. thanks to all who replied. I've got the thing mostly taken apart in the
    spare bedroom cause I had to put new tires on, otherwise might not have
    noticed something was wrong. Anyhoo, will check out the mentioned shimano
    derailleurs.
    thanks again.
    joaquino <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    I've got a giant rincon, 4-5 years old. The cable boot
    thingy that screws into the rear derailleur is stripped
    out. I guess it would be easiest to just replace it. 21
    speed, rear d is shimano acera-x. I've been looking
    online, but don't really know of what I need toppull,
    bottompull? So many choices... Can someone suggest
    something comparable that'll be ok with


    the

    Quoted message said:

    altus front derailleur? any help would be greatly
    appreciated.

  6. joaquino said:

    I've got a giant rincon, 4-5 years old. The cable boot
    thingy that screws into the rear derailleur is stripped
    out. I guess it would be easiest to just replace it. 21
    speed, rear d is shimano acera-x. I've been looking online,
    but don't really know of what I need toppull, bottompull?
    So many choices... Can someone suggest something comparable
    that'll be ok with the altus front derailleur? any help
    would be greatly appreciated.

    get some tin snips and snip that sh!t off!

    SS baby SS, Bill The mind serves properly as a window glass
    rather than as a reflector, that is, the mind should give an
    immediate view instead of an interpretation of the world.
    :-]

  7. joaquino said:

    I've got a giant rincon, 4-5 years old. The cable boot
    thingy that screws into the rear derailleur is stripped
    out. I guess it would be easiest to just replace it. 21
    speed, rear d is shimano acera-x. I've been looking
    online, but don't really know of what I need toppull,
    bottompull? So many choices... Can someone suggest
    something comparable that'll be ok with the altus front
    derailleur? any help would be greatly appreciated.

    If it's just the little dirt cover, don't sweat it. You
    should be able to get another one at your LBS if you feel
    the need. Otherwise, I'm not entirely clear what part you're
    talking about and I'm too lazy to go to the garage and look
    to figure it out... Anyway, lots of good advice in previous
    responses. If you feel inclined, you may find what you're
    looking for at "Loose Screws" here tinyurl.com2dzyg

    You can also get a decent replacement for around US $20-25
    if you feel the need for an all out replacement. Try
    Pricepoint, Nashbar, Jensen, or even your LBS if you wanna
    shop local.

    Tom

  8. Bill Wheeler <[email hidden]> had this to say
    "]news:[email hidden]

    Quoted message said:


    get some tin snips and snip that sh!t off!

    SS baby SS, Bill The mind serves properly as a window
    glass rather than as a reflector, that is, the mind
    should give an immediate view instead of an
    interpretation of the world.
    :-]

    "yawn*

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.