In article <[email hidden]>,
!Jones said:In G-code programming, the parameters to the bolt hole circle (bhc)
procedure are radius, angle from vertical to first hole, and number of
holes. My point is that when anyone but a cyclist talks about a bhc,
he or she universally specifies a *radius*, not a diameter.
So, a 110 bhc should be 55!!!
Jones
Well, that's fair, but the actual most useful in-the-field measure, as
Sheldon points out somewhere, is the distance from bolt to bolt for a
given BCD and bolt pattern*.
Bolt-bolt centres are an easy thing to measure, while the diameter is
hard to directly measure.
Also, BCD feels relevant to cyclists because it constrains the smallest
number of teeth a ring on that bolt circle can have (about 39 for 130 mm
BCD, barring heroic efforts).
*bolt pattern being a distinction that was hardly necessary until the
advent of 4-bolt MTB cranks
--
Ryan Cousineau [email hidden] http://www.wiredcola.com/
"I don't want kids who are thinking about going into mathematics
to think that they have to take drugs to succeed." -Paul Erdos