But DO like the vision correction! I could actually see with these things on!
The foam around eyecups worries me a bit. Looks like it could come off after some wear. No?
Let me know how they work out for you. I first had Speedo goggles with the optical correction. They stopped making that style. I tried their new style but it didn't work too well. So I found something from Tyr. That's been working pretty well (not as clear as the Speedo's though). Finally I got some no-name ones from a local swim shop where I got to pick different powers for each eye. Those are pretty comfy and clear. Of these, the Speedo's have started to leak (but that is after more than 4 years). The Tyr's aren't too comfy. Nowadays I'm swimming with the no-name ones.
How much did you pay? Mine have all been in the $20-$30 range.
How much did you pay? Mine have all been in the $20-$30 range.
Quoted message said:
Quoted message said:
They were pricey!!
Quoted message said:
Quoted message said:
Paid $53 incluidng $10 for shipping.... total was $63
Quoted message said:
Quoted message said:
I got he negative 4.5 correction
Quoted message said:
well I tried out my barracuda goggles last night and they leak for some reason
Quoted message said:
will keep messing with them and see if I can adjust them so they don't leak
Quoted message said:
any advice on this?
Don't know what to tell you. I've never had much luck with goggles. I've tried a lot of them, and they either hurt or leak. Something non-standard about the shape of my face, I guess. Seals work ok for me, but I doubt they come in prescription.
Seals work ok for me, but I doubt they come in prescription.
Quoted message said:
yep.... no vision correction on the seals.....but may have to go with them anyway
Quoted message said:
so you have NOT had good luck with goggles where the eye pieces are separate "cups" huh?
Quoted message said:
the one piece seal design works better for you?
Yes, that's right. But that's just my face shape. I have friends who can just pick up any pair of goggles, and they always fit. So this is entirely an individual issue.
There was one separate-cups design that worked pretty well for me, but didn't last long. I can't remember which one it was, but it used lots of foam as the sealing mechanism.
This is a long shot, but it might be possible to find some closed-cell foam, and cut out donuts you could insert between your face and the goggles, and that might give you a good seal.
well I tried out my barracuda goggles last night and
Quoted message said:
they leak for some reason
will keep messing with them and see if I can adjust them so they don't leak
any advice on this?
It takes a few wearings for the barracuda's to adapt and fit to your face. NEVER let anyone else "just let me try them"!
I don't have the rx ones--just the B300 and the B200. I find that if I don't wear them for a few weeks (going from indoor to outdoor swimming)--they leak just a little bit until my face "heats" up the foam. One thing to be aware of is "funky" foam. My winter pair (clear) has white foam that always has a bit of a mold condition (I sometimes take a q-tip of bleach/water to it). the summer pair--same white foam--no funk. I always hang them up to dry after rinsing and they hang side by side.
"Pat" <[email hidden]> wrote in message news:[email hidden]...
Quoted message said:
Quoted message said:
well I tried out my barracuda goggles last night and they leak for some reason
will keep messing with them and see if I can adjust them so they don't leak
any advice on this?
They mold to your facial structure. Give it time.
Yes, and try making the strap a bit tighter, too. Because they are pushing on your face over a relatively wide area, you can get away with the strap being a bit tighter.
Yes, and try making the strap a bit tighter, too. Because they are pushing on your face over a relatively wide area, you can get away with the strap being a bit tighter.