Cycling Equipment · Public discussion

Rear shock replacement

Started by Colin Anderson · · Last activity · 3 posts · 1,416 views

This thread is locked and is currently read-only.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
28 October 2003
Last activity
28 October 2003
Original author
Colin Anderson
Posts
3
Discussion status
Public discussion
Total views
1,416
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–3 of 3
Posts remain in their original chronological order.

Text size
  1. Anyone tried replacing the el cheapo spring based rear shock (dnm firestarter) with a basic Fox
    Float air shock? The bike is a cheap 6061 Y frame (Saracen Ikon) but with other good stuff on
    it. It has stood up to some VERY rough stuff so far but the rear end is proving difficult to tune
    properly it has a 650lb spring at the moment but it's still too bouncy. It came with a 750lb
    spring and the damper was non-existent. A new bike is not an option due to limited budget. Any
    ideas appreciated. Cheers Colin

  2. I just did sorta the same on my bike ...

    Price was a big deal, and fit. Don't know what your eye to eye is, but I was able to replace my
    "kind shock" with a NOS Fox Vanilla RX off of eBay. Made all the difference in the world.

    When I was pricing out replacements for the shock, the price often was about what I paid for the
    entire bike, and I sure didn't want to spend that much. With a little searching though you should be
    able to find a good replacement for a reasonable price. The Vanilla RX cost me $51 US.

    If your shock is 140mm eye to eye, you might want to do a search on eBay for "Vanilla RX" ...
    nycbikes must have about 80 of these is stock, and always has one selling on eBay. From what I can
    tell these were OEM on a Cannondale and must be about 3 or 4 years old, but I contacted Fox and they
    said they should be fine, just install and go. For what it's worth, mine works just fine.

    C.Q.C.

    "Colin Anderson" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    Anyone tried replacing the el cheapo spring based rear shock (dnm firestarter) with a basic Fox
    Float air shock? The bike is a cheap 6061 Y frame (Saracen Ikon) but with other good stuff


    on

    Quoted message said:

    it. It has stood up to some VERY rough stuff so far but the rear end is proving difficult to tune
    properly it has a 650lb spring at the moment but it's still too bouncy. It came with a 750lb
    spring and the damper was non-existent. A new bike is not an option due to limited budget. Any
    ideas appreciated. Cheers Colin

  3. Eye to Eye is 165mm. I'm in the UK so many of the shocks on Ebay are unavailable to me. keeping an
    eye on a couple though! Cheers Colin

    "Q." <[email hidden]> wrote in message "]news:[email hidden]...

    Quoted message said:

    I just did sorta the same on my bike ...

    Price was a big deal, and fit. Don't know what your eye to eye is, but I was able to replace my
    "kind shock" with a NOS Fox Vanilla RX off of eBay. Made all the difference in the world.

    When I was pricing out replacements for the shock, the price often was


    about

    Quoted message said:

    what I paid for the entire bike, and I sure didn't want to spend that


    much.

    Quoted message said:

    With a little searching though you should be able to find a good


    replacement

    Quoted message said:

    for a reasonable price. The Vanilla RX cost me $51 US.

    If your shock is 140mm eye to eye, you might want to do a search on eBay


    for

    Quoted message said:

    "Vanilla RX" ... nycbikes must have about 80 of these is stock, and always has one selling on
    eBay. From what I can tell these were OEM on a Cannondale and must be about 3 or 4 years old, but
    I contacted Fox and


    they

    Quoted message said:

    said they should be fine, just install and go. For what it's worth, mine works just fine.

    C.Q.C.

    "Colin Anderson" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    Anyone tried replacing the el cheapo spring based rear shock (dnm firestarter) with a basic Fox
    Float air shock? The bike is a cheap 6061 Y frame (Saracen Ikon) but with other good


    stuff

    Quoted message said:

    on

    Quoted message said:

    it. It has stood up to some VERY rough stuff so far but the rear end is proving difficult to
    tune properly it has a 650lb spring at the moment


    but

    Quoted message said:
    Quoted message said:

    it's still too bouncy. It came with a 750lb spring and the damper was non-existent. A new bike
    is not an option due to limited budget. Any ideas appreciated. Cheers Colin


Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.