Anyone tried replacing the el cheapo spring based rear shock (dnm firestarter) with a basic Fox
Float air shock? The bike is a cheap 6061 Y frame (Saracen Ikon) but with other good stuff on
it. It has stood up to some VERY rough stuff so far but the rear end is proving difficult to tune
properly it has a 650lb spring at the moment but it's still too bouncy. It came with a 750lb
spring and the damper was non-existent. A new bike is not an option due to limited budget. Any
ideas appreciated. Cheers Colin
Cycling Equipment · Public discussion
Rear shock replacement
This thread is locked and is currently read-only.
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 28 October 2003
- Last activity
- 28 October 2003
- Original author
- Colin Anderson
- Posts
- 3
- Discussion status
- Public discussion
- Total views
- 1,416
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
I just did sorta the same on my bike ...
Price was a big deal, and fit. Don't know what your eye to eye is, but I was able to replace my
"kind shock" with a NOS Fox Vanilla RX off of eBay. Made all the difference in the world.When I was pricing out replacements for the shock, the price often was about what I paid for the
entire bike, and I sure didn't want to spend that much. With a little searching though you should be
able to find a good replacement for a reasonable price. The Vanilla RX cost me $51 US.If your shock is 140mm eye to eye, you might want to do a search on eBay for "Vanilla RX" ...
nycbikes must have about 80 of these is stock, and always has one selling on eBay. From what I can
tell these were OEM on a Cannondale and must be about 3 or 4 years old, but I contacted Fox and they
said they should be fine, just install and go. For what it's worth, mine works just fine.C.Q.C.
"Colin Anderson" <[email hidden]> wrote in message
"]news:[email hidden]...Quoted message said:
Anyone tried replacing the el cheapo spring based rear shock (dnm firestarter) with a basic Fox
Float air shock? The bike is a cheap 6061 Y frame (Saracen Ikon) but with other good stuff
onQuoted message said:
it. It has stood up to some VERY rough stuff so far but the rear end is proving difficult to tune
properly it has a 650lb spring at the moment but it's still too bouncy. It came with a 750lb
spring and the damper was non-existent. A new bike is not an option due to limited budget. Any
ideas appreciated. Cheers Colin -
Eye to Eye is 165mm. I'm in the UK so many of the shocks on Ebay are unavailable to me. keeping an
eye on a couple though! Cheers Colin"Q." <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:
I just did sorta the same on my bike ...
Price was a big deal, and fit. Don't know what your eye to eye is, but I was able to replace my
"kind shock" with a NOS Fox Vanilla RX off of eBay. Made all the difference in the world.When I was pricing out replacements for the shock, the price often was
aboutQuoted message said:
what I paid for the entire bike, and I sure didn't want to spend that
much.Quoted message said:
With a little searching though you should be able to find a good
replacementQuoted message said:
for a reasonable price. The Vanilla RX cost me $51 US.
If your shock is 140mm eye to eye, you might want to do a search on eBay
forQuoted message said:
"Vanilla RX" ... nycbikes must have about 80 of these is stock, and always has one selling on
eBay. From what I can tell these were OEM on a Cannondale and must be about 3 or 4 years old, but
I contacted Fox and
theyQuoted message said:
said they should be fine, just install and go. For what it's worth, mine works just fine.
C.Q.C.
"Colin Anderson" <[email hidden]> wrote in message
"]news:[email hidden]...Quoted message said:
Anyone tried replacing the el cheapo spring based rear shock (dnm firestarter) with a basic Fox
Float air shock? The bike is a cheap 6061 Y frame (Saracen Ikon) but with other good
stuffQuoted message said:
on
Quoted message said:
it. It has stood up to some VERY rough stuff so far but the rear end is proving difficult to
tune properly it has a 650lb spring at the moment
butQuoted message said:
Quoted message said:
it's still too bouncy. It came with a 750lb spring and the damper was non-existent. A new bike
is not an option due to limited budget. Any ideas appreciated. Cheers Colin
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.