Mountain Bikes · Public discussion

thank you Santa

Started by daddy · · Last activity · 3 posts · 676 views

This thread is locked and is currently read-only.

Thread details

What we know about this thread

Original section
Mountain Bikes
Published
16 December 2006
Last activity
17 December 2006
Original author
daddy
Posts
3
Discussion status
Public discussion
Total views
676
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–3 of 3
Posts remain in their original chronological order.

Text size
  1. Just picked up a 2005 Titus Switchblade
    frame (medium). Comes with a Fox Talas
    Float RL shock.

    Plan to build it up using my Shimano 8spd
    setup. Using the XT 8spd shifters, and
    XT front & rear der. SRAM cassette & chain.
    Pulling the BB7's and SD7's levers from my
    Trek.

    Undecided on the front fork as of yet. Suggestions?

    Will be building this up over the holiday
    break. Can't wait to take it over to South
    Mountain. :-)

    (Santa was nice & early this year).

  2. daddy said:

    Just picked up a 2005 Titus Switchblade
    frame (medium). Comes with a Fox Talas
    Float RL shock.

    Plan to build it up using my Shimano 8spd
    setup. Using the XT 8spd shifters, and
    XT front & rear der. SRAM cassette & chain.
    Pulling the BB7's and SD7's levers from my
    Trek.

    Undecided on the front fork as of yet. Suggestions?

    Will be building this up over the holiday
    break. Can't wait to take it over to South
    Mountain. :-)

    (Santa was nice & early this year).

    Hey Daddy-O, nice ride.

    Depending on your rockers, you probably have between 3" and 5.7" of
    adjustable rear travel. I'd recommend you get a fork that has
    adjustable travel, because the Blade's a little ponderous to climb with
    a fork extended out much over 110mm. You'll want to dial it down, or if
    you can, lock it out for climbing. I have the Manitou Minute on my
    Talas Blade, and like it quite a bit. It's plush and responsive on
    the balls-out descents, I can adjust it on the fly, and it takes the
    medium drops and hits (ie, under 4' just fine). But I've seen em with
    mostly Fox forks and a Rock Shox Revelation of Pike, even though I tend
    to like Marzocchi a lot, personally.

    Have fun, and give Santa a kiss (if that's appropriate)

    CDB

  3. Quoted message said:


    Hey Daddy-O, nice ride.

    Depending on your rockers, you probably have between 3" and 5.7" of
    adjustable rear travel. I'd recommend you get a fork that has
    adjustable travel, because the Blade's a little ponderous to climb with
    a fork extended out much over 110mm. You'll want to dial it down, or if
    you can, lock it out for climbing. I have the Manitou Minute on my
    Talas Blade, and like it quite a bit. It's plush and responsive on
    the balls-out descents, I can adjust it on the fly, and it takes the
    medium drops and hits (ie, under 4' just fine). But I've seen em with
    mostly Fox forks and a Rock Shox Revelation of Pike, even though I tend
    to like Marzocchi a lot, personally.

    Have fun, and give Santa a kiss (if that's appropriate)

    CDB

    I'm a bomber fan as well. :-)

    The frame/shock is capable of going the full 5.6/5.7 of travel.

    thanks for the insight. Christmas can't come soon enough, (so
    that I can get the rest of my build bits). Just anxious to get this
    bad boy built up.

    as you noted, I've scanned the net and have seen a lot of builds
    with either Fox or the Pike. Definitely will get an adjustable
    travel fork.

    The frame I bought did come with a Manitou Black RTWD fork. (90-120mm
    of travel). I can hang out with that for a while, as I build this
    up.

    Yes, I can give Santa (Wifey) a kiss, (and more). :-)

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.