KH 07 hub/crankset

The KH bearings are 42mm.

If your frame has 42mm bearing holders, your good to go. =p

--
Jerrick

~*~!I ride for Christ, Fun, Challenges, and a lot
more!~*~
'!Gallery!' (http://tinyurl.com/gf2g9)
'!MRIS!' (http://tinyurl.com/jjjnz)
'Easy Tire Removal Guide.' (http://tinyurl.com/rd9ru)
My sponsor '~!SIXSIXONE!~' (http://sixsixone.com/) KH Funds =
Deadish/$499
------------------------------------------------------------------------
Jerrick's Profile: http://www.unicyclist.com/profile/11632
View this thread: http://www.unicyclist.com/thread/54788

They will fitt KH 2005/2006/2007 frames(DHU!!)
Koxx and Qu-ax will fit to.
I'f you are not sure ask Roger (unicycle.com) or Roland (municycle.com)
to check it, they would love to help.

PM

--
Probailer2

john_childs said:

Mmmmm... Sexy welds.

musketman said:

Kris Holm owns death

abbabibble said:

cody bent his koxx.

he was working it pretty hard.

------------------------------------------------------------------------
Probailer2's Profile: http://www.unicyclist.com/profile/11034
View this thread: http://www.unicyclist.com/thread/54788

This is the setup i want

KH Hub/Crankset
Alex DX32 rim
Jimmy C pedals (already got)
Kh Street fusion saddle (already got)

Havent decided on frame/post/clamp yet. Anyone got any ideas?

And is that a good setup?

--
blackbike

add me on msn, [email hidden]

phlegm said:

In fact, when I put on my spandex and strut around the hood with my
unicycle, all the ladies want a piece of me.

------------------------------------------------------------------------
blackbike's Profile: http://www.unicyclist.com/profile/13551
View this thread: http://www.unicyclist.com/thread/54788

get a wide rim, you won't regret it!
kh frame for sure, it's the lightest, dosen't have lame 22.2 seat tube,
cnc bearing holders.

--
onetrack

"People over here have a dangerous habit of adding quotes to signature
lines."
-Klaas Bil

I pulled a sick trey varial hickflip over an 8 set yesterday, but
unfortunately it was supposed to be seat in to seat out. I've named it
the dioflip
------------------------------------------------------------------------
onetrack's Profile: http://www.unicyclist.com/profile/6374
View this thread: http://www.unicyclist.com/thread/54788

I'll pop a question in here, too.

I've got a 24" Muni with a UDC Wide Hub, a Yuni frame, an Alex DX32
rim, etc etc, and I want to get the 07 KH Hub and Cranks for it because
they are so bloody cheap! So, will I need to get a new frame, or
bearing shims or something?

--
UniTyler

john_childs said:

Be thankful you didn't need to take a [censored] or a #2 while you were out
there.

tobbogonist said:

and yes it will only have 1 wheel and will not run on suger and farts

------------------------------------------------------------------------
UniTyler's Profile: http://www.unicyclist.com/profile/6120
View this thread: http://www.unicyclist.com/thread/54788

No it wont fit tyler. A yuni frame is for 40mm OD bearings and the KH
hub bearings are 42mm OD. You cant shim bearings down.You would have to
get a new frame or get a different hub and crankset.

--
maximus unius

Quoted message said:

Originally Posted by *Brian MacKenzie*
Have you tried rubbing your nipples with grease before twisting them so
tightly?

------------------------------------------------------------------------
maximus unius's Profile: http://www.unicyclist.com/profile/13699
View this thread: http://www.unicyclist.com/thread/54788

maximus unius said:

No it wont fit tyler. A yuni frame is for 40mm OD bearings and the KH
hub bearings are 42mm OD. You cant shim bearings down.You would have to
get a new frame or get a different hub and crankset.

Thanks. What frames will fit, namely?

--
UniTyler

john_childs said:

Be thankful you didn't need to take a [censored] or a #2 while you were out
there.

tobbogonist said:

and yes it will only have 1 wheel and will not run on suger and farts

------------------------------------------------------------------------
UniTyler's Profile: http://www.unicyclist.com/profile/6120
View this thread: http://www.unicyclist.com/thread/54788

KH, koxx, I think the qu-ax.

if it fits, get the qu-ax aluminum frame. its like $100, and so freakin
nice.

also, definantly get a wide rim. they help tons.

--
mornish

ivan said:

I believe in the Invisible Pink Unicorn.

mscalisi said:

wait...invisible AND pink?

Evan Byrne said:

Are you planing war against a iceberg or something?

aim: kiloornish
email: [email hidden]
------------------------------------------------------------------------
mornish's Profile: http://www.unicyclist.com/profile/11658
View this thread: http://www.unicyclist.com/thread/54788

Well obviosly the KH frames will fit, but they are a bit pricey. The
qu-ax frame will fit and so will the koxx frame. Now, the problem with
all three of these frames is that the seat tube is either 25.4 or 27.2,
the koxx and KH being 27.2 and the qu-ax being 25.4 (I think it is, but
it could be 27.2 also). The yuni frame is for 22.2 seat posts. -SO-,
you could choose from 3 different things to do:

1. Buy a different hub and crankset to fit your 40mm OD bearings
2. Buy a the KH moment hub and crankset PLUS a new frame and post
3. Stick with your UDC wide hub

--
maximus unius

Quoted message said:

Originally Posted by *Brian MacKenzie*
Have you tried rubbing your nipples with grease before twisting them so
tightly?

------------------------------------------------------------------------
maximus unius's Profile: http://www.unicyclist.com/profile/13699
View this thread: http://www.unicyclist.com/thread/54788

maximus unius said:

Well obviosly the KH frames will fit, but they are a bit pricey. The
qu-ax frame will fit and so will the koxx frame. Now, the problem with
all three of these frames is that the seat tube is either 25.4 or 27.2,
the koxx and KH being 27.2 and the qu-ax being 25.4 (I think it is, but
it could be 27.2 also). The yuni frame is for 22.2 seat posts. -SO-,
you could choose from 3 different things to do:

1. Buy a different hub and crankset to fit your 40mm OD bearings
2. Buy a the KH moment hub and crankset PLUS a new frame and post
3. Stick with your UDC wide hub

or,

1. find some different bearings for it.
2. you wouldn't need a new post. Shim it.

--
mornish

ivan said:

I believe in the Invisible Pink Unicorn.

mscalisi said:

wait...invisible AND pink?

Evan Byrne said:

Are you planing war against a iceberg or something?

aim: kiloornish
email: [email hidden]
------------------------------------------------------------------------
mornish's Profile: http://www.unicyclist.com/profile/11658
View this thread: http://www.unicyclist.com/thread/54788

1. In the Kris Holm 2007 products are here thread, Kris said that
currently no bearings are made to fit on his hub that have an OD of
40mm.

2. I didnt even know that there were shims made that are large enough
to shim from a 22.2 to a 27.2.

--
maximus unius

Quoted message said:

Originally Posted by *Brian MacKenzie*
Have you tried rubbing your nipples with grease before twisting them so
tightly?

------------------------------------------------------------------------
maximus unius's Profile: http://www.unicyclist.com/profile/13699
View this thread: http://www.unicyclist.com/thread/54788

they are available at webcyclery. you can also use 2 shims but thats
usually a waste of money. the koxx frame is something like 31.8 so it
comes with a shim in it.

--
mornish

ivan said:

I believe in the Invisible Pink Unicorn.

mscalisi said:

wait...invisible AND pink?

Evan Byrne said:

Are you planing war against a iceberg or something?

aim: kiloornish
email: [email hidden]
------------------------------------------------------------------------
mornish's Profile: http://www.unicyclist.com/profile/11658
View this thread: http://www.unicyclist.com/thread/54788

maximus unius said:

2. I didnt even know that there were shims made that are large enough to
shim from a 22.2 to a 27.2.

http://tinyurl.com/y9ydxo

Darren has them too but he doesnt have a pic I can link to.

I would try to avoid 2 shims because it tends to move around more.

--
Spencer Hochberg

(disclaimer: i may not know what i am talking about)

Me said:

Evan is mean.

'Gallery.unicyclist.com/spencer'
(http://Gallery.unicyclist.com/spencer)
AIM: Litldude2
Email: Litldude2 (att) aol (dott) com
'Bedford Unicycles' (http://BedfordUnicycles.ca)
------------------------------------------------------------------------
Spencer Hochberg's Profile: http://www.unicyclist.com/profile/12659
View this thread: http://www.unicyclist.com/thread/54788

Cool thanks.

--
maximus unius

Quoted message said:

Originally Posted by *Brian MacKenzie*
Have you tried rubbing your nipples with grease before twisting them so
tightly?

------------------------------------------------------------------------
maximus unius's Profile: http://www.unicyclist.com/profile/13699
View this thread: http://www.unicyclist.com/thread/54788

Yea, the bearings you'd need to adapt it would be 22x40x10 (ID/OD/Width)
and those just don't exist. Period. I've been looking for weeks
everywhere possible. I'm going to have to buy the way more expensive
profiles because I don't want to part with my custom frame. It sucks.

--
Seager

'Team RoadShow' (http://www.teamroadshow.com) | 'Unexpected Failure
Productions' (http://www.unexpectedfailure.com) | 'Moab'
(http://tinyurl.com/9fxuv)
------------------------------------------------------------------------
Seager's Profile: http://www.unicyclist.com/profile/8840
View this thread: http://www.unicyclist.com/thread/54788

uhmm
what if you bend the bearing caps?
or make a shim so that the top is
it is only 2mm different

--
skrobo

Quoted message said:

<> Unicycle For Christ <><

____________________________________________
-last edited by \"your mom\" at 8:35 pm -
------------------------------------------------------------------------
skrobo's Profile: http://www.unicyclist.com/profile/12272
View this thread: http://www.unicyclist.com/thread/54788

You can shim to something smaller but not something larger. You can't
shim a 42mm bearing to fit in a 40mm holder. And it's a custom fit
holder, so a larger bearing would get in the way of the allen screws.

--
Seager

'Team RoadShow' (http://www.teamroadshow.com) | 'Unexpected Failure
Productions' (http://www.unexpectedfailure.com) | 'Moab'
(http://tinyurl.com/9fxuv)
------------------------------------------------------------------------
Seager's Profile: http://www.unicyclist.com/profile/8840
View this thread: http://www.unicyclist.com/thread/54788

Seager said:

You can shim to something smaller but not something larger. And it's a
custom fit holder, so a larger bearing would get in the way of the
allen screws.

Are you sure that's the case, have you measured it to check. After all
it's only 1mm each side.

Unless the screws really are right next to the bearing, it's only a mm
to take out, you'd maybe be able to machine out the extra mm from the
existing bearing holders, or maybe even file it somehow (assuming
they're precision holders machined out to exactly the right bearing
size).

Joe

--
joemarshall

my pics http://gallery.unicyclist.com/albuq44
------------------------------------------------------------------------
joemarshall's Profile: http://www.unicyclist.com/profile/1545
View this thread: http://www.unicyclist.com/thread/54788

tons of people have done it. just look at the qu-ax and the nimbus
hoppeley. the bearing caps are barely screwed on. roland said that the
alu qu-ax frame doesn't fit with isis hubs.

--
zfreak220

iridemymuni said:

i think everybody agrees when i say you lucky son of a [censored]

------------------------------------------------------------------------
zfreak220's Profile: http://www.unicyclist.com/profile/11948
View this thread: http://www.unicyclist.com/thread/54788