Australia and New Zealand ยท Public discussion

Back in black...

Started by flyingdutch ยท ยท Last activity ยท 29 posts ยท 1,803 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Australia and New Zealand
Published
28 October 2006
Last activity
1 November 2006
Original author
flyingdutch
Posts
29
Discussion status
Public discussion
Total views
1,803
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1โ€“20 of 29
Posts remain in their original chronological order.

Text size
  1. NEW BIKE ๐Ÿ˜„๐Ÿ˜„๐Ÿ˜„

    Commuter
    Giant CRX City - black
    plus rack - black
    plus EggBeater Candy's - black
    plus barends - black
    Swapped suspension seatpost fer Alu one - Black

    Just in time fer daylight saving so little need for lights so hanging off for purchase of dynohub+light as am hoping the 'next' batch of available ights are even better than currently available.

    First impressions. The 28mm tyres are quick yet comfy.
    Shifting is Shweet. Will be better yet when I can get hold of an 'Alfino' rapidfire shifter to replace the gripshift (altho by then I may not care...)

    wanna chainguard too ๐Ÿ˜„ Do such things still exist???

    PS picked up some one-side platforms for the eggbeaters. Never knew they existed so can now put em on to pedal with civvy shoes

  2. just like craigs bike

  3. flyingdutch said:

    NEW BIKE ๐Ÿ˜„๐Ÿ˜„๐Ÿ˜„

    Commuter
    Giant CRX City - black
    plus rack - black

    Just in time fer daylight saving so little need for lights so hanging off for purchase of dynohub+light as am hoping the 'next' batch of available ights are even better than currently available.

    First impressions. The 28mm tyres are quick yet comfy.
    Shifting is Shweet. Will be better yet when I can get hold of an 'Alfino' rapidfire shifter to replace the gripshift (altho by then I may not care...)

    Looks like the Giant equivalent of my Avanti Blade 8, but slightly higher specs on some components. I suspect you'll stick with the grip shifter. It works pretty well. The gaps between some gears on the Shimano Nexus 8 hub gear are a bit too large, but not really an issue for a commuter. Gee, you can even commute on a bike without gears if you are crazy enough :-)

    See my other thread on 3W LED Homemade bike lights. When I build Mark 2, it will be 3 x 2.5W and equivalent to a 30W halogen. It *will* have a low power mode as well to avoid dazzling other riders. I don't know if any dyno hubs would power that.

    There is a US company www.reflectivelyyours.com They used to have some "stealth" tape that reflected car headlights, but was black in daylight. I can't seem to find the plain black tape on their site now. Somewhat expensive, but might suit your all black theme if you want to stick reflective tape on your bike. I've just gone with the 3M Scotchlight tape so I've got light grey spots on my dark grey bike.

  4. "flyingdutch" <[email hidden]> wrote in
    message news:[email hidden]...

    Quoted message said:


    NEW BIKE ๐Ÿ˜„๐Ÿ˜„๐Ÿ˜„

    Commuter
    Giant CRX City - black
    plus rack - black
    plus EggBeater Candy's - black
    plus barends - black
    Swapped suspension seatpost fer Alu one - Black

    Just in time fer daylight saving so little need for lights so hanging
    off for purchase of dynohub+light as am hoping the 'next' batch of
    available ights are even better than currently available.

    First impressions. The 28mm tyres are quick yet comfy.
    Shifting is Shweet. Will be better yet when I can get hold of an
    'Alfino' rapidfire shifter to replace the gripshift (altho by then I
    may not care...)

    wanna chainguard too ๐Ÿ˜„ Do such things still exist???

    PS picked up some one-side platforms for the eggbeaters. Never knew
    they existed so can now put em on to pedal with civvy shoes

    --
    flyingdutch

    Noice! What's that crankset like when you get up close and personal with it?
    I've been wondering about options on affordable but not [censored] single
    chainring jobbies. Only thing I've found so far is the Sugino RD ones.

  5. flyingdutch said:

    NEW BIKE ๐Ÿ˜„๐Ÿ˜„๐Ÿ˜„

    Commuter
    Giant CRX City - black
    plus rack - black
    plus EggBeater Candy's - black
    plus barends - black
    Swapped suspension seatpost fer Alu one - Black

    Just in time fer daylight saving so little need for lights so hanging
    off for purchase of dynohub+light as am hoping the 'next' batch of
    available ights are even better than currently available.

    First impressions. The 28mm tyres are quick yet comfy.
    Shifting is Shweet. Will be better yet when I can get hold of an
    'Alfino' rapidfire shifter to replace the gripshift (altho by then I
    may not care...)

    wanna chainguard too ๐Ÿ˜„ Do such things still exist???

    PS picked up some one-side platforms for the eggbeaters. Never knew
    they existed so can now put em on to pedal with civvy shoes


    She was a fast machine, she kept her motor clean, she was the best damn
    bicycle I'd ever seen........
    You! Rode me all day long...

    Sounds nice! Mind you, if its as black as it seems, you'll want some
    serious lights and be-seen gear!

  6. Resound said:


    Noice! What's that crankset like when you get up close and personal with it?
    I've been wondering about options on affordable but not [censored] single
    chainring jobbies. Only thing I've found so far is the Sugino RD ones.

    they are 'OK'. shall investigate an upgrade sometime in future. maybe LX or higher? i assume I can shim out or bmx-bolt a single ring onto one of them.
    Or just a Miche track crankset which i 'think' is what Suzy ended up doing on hers?

    The dark grey on black livery is noice and low key too.

    Bring awnnn daylight savings!!!

    Do bikes in BrisVegas fade faster due to 'more' daylight? ๐Ÿ˜„ ๐Ÿ™„

  7. flyingdutch <[email hidden]> wrote in
    news:[email hidden]:

    Quoted message said:


    Resound said:


    Noice! What's that crankset like when you get up close and personal
    with it?
    I've been wondering about options on affordable but not [censored] single
    chainring jobbies. Only thing I've found so far is the Sugino RD
    ones.

    they are 'OK'. shall investigate an upgrade sometime in future. maybe
    LX or higher? i assume I can shim out or bmx-bolt a single ring onto
    one of them.
    Or just a Miche track crankset which i 'think' is what Suzy ended up
    doing on hers?

    The dark grey on black livery is noice and low key too.

    Bring awnnn daylight savings!!!

    Do bikes in BrisVegas fade faster due to 'more' daylight? ๐Ÿ˜„
    ๐Ÿ™„

    No but they do further north :-)

    For those down south who don't understand, Queensland big, real big (ok
    WA is bigger). Currently there are about 500,000 to 750,000 people
    living north of the Tropic of Capricorn. These lucky individuals have
    an average of 9.5 or more hours full sunlight between September and
    March (it peaks in October and reduces into the wet season due to
    clound). Now this does not include dawnlight and twilight. Generally
    they couldn't care less if the time is not the same as it is in Sydney,
    they're smart enough to add an hour if it matters:-)

    It don't fade your curtains but you want to stay out of it as much as
    possible (continous extreme UV for 6 months and it's a little warm)

    In actual hours of sunlight places like Mt Isa will have almost 14 hours
    of usable light as the longest day approaches. Strangely daylight
    saving is not an issue. Keeping out of temps above 32C (or 45C in the
    Isa) is. Having kids leave school at 14:00 (which is 15:00 under
    daylight saving) is pretty brainless when this is the hottest part of
    the day.

    Even now if I leave get home at say 18:00 I'll have at least 1/2 hour to
    ride without lights. By the end of November this will be an hour. I
    don't need sundown to be at 20:00 thanks.

    If people in the Southeast want it so bad then give us a separate state.
    The population of North Queensland (as a state) will be equal to or
    exceed the population of WA, SA, Tas and NT over the next 10 to 15
    years. Of course this won't happen because NQ State would include
    almost all of the metalliforous mining, most of the coal, most of the
    metals production, significant amount of all heavy engineering, ship
    building, the largest army base in the country and a heap of very
    valuable agricultural output (and some really useless stuff called sugar
    cane). It's the only place in Qld to produce Ethanol as well (not sure
    if that matters). Oh and we have water as well. Most of the highest
    wage postcodes are also in the north (near the mines). Without NQ the
    rest of Queensland has the economy of Tasmania with 3 times the
    population. That would not be good.

    All of this and I can't find a custom frame builder damn it.

    Regards

    BrettM

  8. Brett Martin said:

    Even now if I leave get home at say 18:00 I'll have at least 1/2 hour to
    ride without lights. By the end of November this will be an hour. I
    don't need sundown to be at 20:00 thanks.

    You have just reminded me of what's coming up in WA. Oh dear, oh dear!

    I fried last summer when riding home after work, and this summer it is going
    to be in a hotter part of the day thanks to daylight-saving. Curses...

    Cheers,

    Vince

  9. flyingdutch said:

    NEW BIKE ๐Ÿ˜„๐Ÿ˜„๐Ÿ˜„

    Pic?

  10. In aus.bicycle on Sun, 29 Oct 2006 22:19:55 +0800

    Vincent Patrick said:

    I fried last summer when riding home after work, and this summer it is going
    to be in a hotter part of the day thanks to daylight-saving. Curses...

    Eh?

    You lot are doing daylight saving this year?

    Bizarre!

    Be good for me though, makes phone calls home easier when it's only a
    2 hours difference.

    Zebee

  11. flyingdutch said:

    NEW BIKE ๐Ÿ˜„๐Ÿ˜„๐Ÿ˜„

    (snip)

    PS picked up some one-side platforms for the eggbeaters. Never knew they existed so can now put em on to pedal with civvy shoes


    Care to share where you got these from?

  12. Zebee Johnstone said:


    Be good for me though, makes phone calls home easier when it's only a
    2 hours difference.

    The pollies are still arguing it out - I think the vote happens this
    week and if we are to get it, it will kick in on 3rd Dec.

    --
    ..dt

  13. Wilchemy said:

    Care to share where you got these from?

    bought at Ivanhoe Cycles. not my usual LBS, but was driven mainly cos the dang CRX city's are gettin rather rare.
    I would recommend the shop tho. cheery crew. good service and no bollox advice and good price (altho was a liberating feeling just listing/adding what i wanted and only asking wat the price was at the end. ThankYou Mr Costello...)

    The platforms must be sumfin that the eggbeaters come with on bikes that are supplied with em?
    I asked to swap the factory-supplied spd platforms ofr eggbeaters and she reached into a draw with a few pairs of Candy's with these contraptions on em

    Today, after maiden commute have tweaked seat possie (moved back)
    dropped stem/swapped spacer
    and cut down bar width by approx 4cm on both sides. Felt like the friggin spruce goose beforehand!

    The grip shifter is gonna take some gettin used to. kinda strange given how much motobike ridin i used to do. go figure...

    Observations. compared to the slicked up mtb,
    it's comfy.
    It handles bumps etc smoother (combo of 28m mtyres and bigger wheels i presume?)
    It's quick!
    The gear shifting is spookily smooth. kinda throws me as i keep lookin down to see if it's shifted. doooh! ๐Ÿ™„
    For an off the rack job it's pretty darn good.

    Do you other peoplez with a nexus hub carry spanner etc for wheel removal? it don't have a QR on the back. Is that an option?

    Do i need bigger-rated tube for spares?

    Must buy black H20 bottle cage tomorrow ๐Ÿ™„

    pix here:

    boroondarabug.orgblack 01.jpg
    boroondarabug.orgblack 02.jpg
    boroondarabug.orgblack 03.jpg
    boroondarabug.orgblack 04.jpg

  14. flyingdutch said:


    boroondarabug.orgblack 04.jpg

    notice the front hub is disk-ready. That may come next winter or 'later'.
    If anyone crunches a GIANT CRX Zero and wants to sell the fork, lemme know ๐Ÿ˜„. Extra cash if painted black (and glossy) ๐Ÿ˜„

  15. "flyingdutch" <[email hidden]> wrote in
    message news:[email hidden]...

    Quoted message said:


    Wilchemy said:

    Care to share where you got these from?

    bought at Ivanhoe Cycles. not my usual LBS, but was driven mainly cos
    the dang CRX city's are gettin rather rare.
    I would recommend the shop tho. cheery crew. good service and no bollox
    advice and good price (altho was a liberating feeling just
    listing/adding what i wanted and only asking wat the price was at the
    end. ThankYou Mr Costello...)

    The platforms must be sumfin that the eggbeaters come with on bikes
    that are supplied with em?
    I asked to swap the factory-supplied spd platforms ofr eggbeaters and
    she reached into a draw with a few pairs of Candy's with these
    contraptions on em

    Today, after maiden commute have tweaked seat possie (moved back)
    dropped stem/swapped spacer
    and cut down bar width by approx 4cm on both sides. Felt like the
    friggin spruce goose beforehand!

    The grip shifter is gonna take some gettin used to. kinda strange given
    how much motobike ridin i used to do. go figure...

    Observations. compared to the slicked up mtb,
    it's comfy.
    It handles bumps etc smoother (combo of 28m mtyres and bigger wheels i
    presume?)
    It's quick!
    The gear shifting is spookily smooth. kinda throws me as i keep lookin
    down to see if it's shifted. doooh! ๐Ÿ™„
    For an off the rack job it's pretty darn good.

    Do you other peoplez with a nexus hub carry spanner etc for wheel
    removal? it don't have a QR on the back. Is that an option?

    Do i need bigger-rated tube for spares?

    Must buy black H20 bottle cage tomorrow ๐Ÿ™„

    pix here:

    http://www.boroondarabug.org/images/black_01.jpg
    http://www.boroondarabug.org/images/black_02.jpg
    http://www.boroondarabug.org/images/black_03.jpg
    http://www.boroondarabug.org/images/black_04.jpg

    --
    flyingdutch

    That's seriously looking the biz. I scored a SA hub on Ebay last
    night...gonna knock up a budget version ๐Ÿ™‚

  16. flyingdutch said:


    Today, after maiden commute have tweaked seat possie (moved back)
    dropped stem/swapped spacer
    and cut down bar width by approx 4cm on both sides. Felt like the friggin spruce goose beforehand!

    The gear shifting is spookily smooth. kinda throws me as i keep lookin down to see if it's shifted. doooh! ๐Ÿ™„
    For an off the rack job it's pretty darn good.

    Do you other peoplez with a nexus hub carry spanner etc for wheel removal? it don't have a QR on the back. Is that an option?

    My Avanti Blade 8 also feels a bit wide. If you cut down the bar width, how do you move the grips?

    I found the grip shift was the opposite direction what I expected.

    Yes I carry a spanner. A cheap 15mm open / ring spanner from Bunnings. Doubles as a pedal spanner.

    It's worth reading the instruction on how to attach and detach the gear cable from the hub. Knowing the right way makes it much easier when repairing a puncture. The service manual for the hub is on Sheldon Brown's site.

  17. flyingdutch said:

    NEW BIKE ๐Ÿ˜„๐Ÿ˜„๐Ÿ˜„

    Commuter
    Giant CRX City - black
    plus rack - black
    plus EggBeater Candy's - black
    plus barends - black
    Swapped suspension seatpost fer Alu one - Black

    Just in time fer daylight saving so little need for lights so hanging
    off for purchase of dynohub+light as am hoping the 'next' batch of
    available ights are even better than currently available.

    First impressions. The 28mm tyres are quick yet comfy.
    Shifting is Shweet. Will be better yet when I can get hold of an
    'Alfino' rapidfire shifter to replace the gripshift (altho by then I
    may not care...)

    wanna chainguard too ๐Ÿ˜„ Do such things still exist???

    PS picked up some one-side platforms for the eggbeaters. Never knew
    they existed so can now put em on to pedal with civvy shoes


    Ooh I am envious ... and I want a chainguard too.

  18. flyingdutch said:
    Wilchemy said:

    Care to share where you got these from?

    bought at Ivanhoe Cycles. not my usual LBS, but was driven mainly cos
    the dang CRX city's are gettin rather rare.
    I would recommend the shop tho. cheery crew. good service and no bollox
    advice and good price (altho was a liberating feeling just
    listing/adding what i wanted and only asking wat the price was at the
    end. ThankYou Mr Costello...)

    The platforms must be sumfin that the eggbeaters come with on bikes
    that are supplied with em?
    I asked to swap the factory-supplied spd platforms ofr eggbeaters and
    she reached into a draw with a few pairs of Candy's with these
    contraptions on em

    Today, after maiden commute have tweaked seat possie (moved back)
    dropped stem/swapped spacer
    and cut down bar width by approx 4cm on both sides. Felt like the
    friggin spruce goose beforehand!

    The grip shifter is gonna take some gettin used to. kinda strange given
    how much motobike ridin i used to do. go figure...

    Observations. compared to the slicked up mtb,
    it's comfy.
    It handles bumps etc smoother (combo of 28m mtyres and bigger wheels i
    presume?)
    It's quick!
    The gear shifting is spookily smooth. kinda throws me as i keep lookin
    down to see if it's shifted. doooh! ๐Ÿ™„
    For an off the rack job it's pretty darn good.

    Do you other peoplez with a nexus hub carry spanner etc for wheel
    removal? it don't have a QR on the back. Is that an option?

    Do i need bigger-rated tube for spares?

    Must buy black H20 bottle cage tomorrow ๐Ÿ™„

    pix here:

    http://www.boroondarabug.org/images/black_01.jpg
    http://www.boroondarabug.org/images/black_02.jpg
    http://www.boroondarabug.org/images/black_03.jpg
    http://www.boroondarabug.org/images/black_04.jpg


    Yes, I carry a spanner. Just this morning I noticed the wheel was a
    little loose, so a couple of turns of the spanner and I was off again.

  19. In article <[email hidden]>,

    flyingdutch said:

    The platforms must be sumfin that the eggbeaters come with on bikes
    that are supplied with em?

    They look like the sort of attachments they use to add reflectors to the
    pedals, required on new bikes by law in some places.

    --
    Shane Stanley

  20. ghostgum said:

    My Avanti Blade 8 also feels a bit wide. If you cut down the bar width, how do you move the grips?

    I found the grip shift was the opposite direction what I expected.

    Yes I carry a spanner. A cheap 15mm open / ring spanner from Bunnings. Doubles as a pedal spanner.

    It's worth reading the instruction on how to attach and detach the gear cable from the hub. Knowing the right way makes it much easier when repairing a puncture. The service manual for the hub is on Sheldon Brown's site.

    aah. thanks fer that. didn't realise that would be an issue

    PS did/has your 'indexing' gone out with the inevitable early cable stretch?

Active in the last 60 minutes

Active in this thread

0 users ยท 0 guests ยท0 bots ยท0 total

No signed-in users are active right now.

No known search crawlers active right now.