Park Tools pump recall

Try contacting them at this address - [email hidden]

Quoted post said:

Originally posted by Mr. Earl
Does anyone have any information with respect to the Park Tools pro pump recall?

E-mail them at that above address and tell them you have one of the pumps.

The indicator of whether you have one of the affected pumps is on the pressure gauge. If yours has a blue arrow to use to point at certain pressures, yours is affected. If it's black it's not.

If you have an affected pump, they'll send you a new pump cylinder. Switch over the gauge and hose and destroy the old cylinder by denting it (claming it in a vise or taking out your frustrations with a hammer...). Your LBS should be able to help you with fulfilling the recall issues.

Thanks for the information. I was curious as to the specifics of the defect. It doesn't seem that the handle rapidly moving up would be that catastrophic when being held with two hands.

Quoted post said:

Originally posted by PSR
If yours has a blue arrow to use to point at certain pressures, yours is affected. If it's black it's not.

Actually, reverse that... If it's black, get it replaced.