Cycling Equipment · Public discussion

Record Annoying Click

Started by Frank & Joni Kn · · Last activity · 15 posts · 852 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
29 August 2003
Last activity
21 September 2003
Original author
Frank & Joni Kn
Posts
15
Discussion status
Public discussion
Total views
852
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–15 of 15
Posts remain in their original chronological order.

Text size
  1. I have a Record drivetrain with around 10,000 miles on it. Lately I've been experiencing a "click"
    on an irregular basis, mostly when applying a lot of pressure to the pedals, which seems to come
    from the rear derailleur or cassette area. It is lightly audible and can be felt.

    I've tried adjusting the rear derailleur per the instruction book and cleaning and very lightly
    greasing the pawls in the freehub. I torqued the BB and crank arms to spec. when I originally
    installed them. The cassette and chain have less than 1500 miles on them, and I keep them clean. I
    also have grease on the outside of the freehub.

    My idea of possible culprits are the IRD 10s snaplink, or the cleats on my shoes (SP Frogs). Neither
    of these seems likely to me, but I'm thinking of changing the chain to a Wipperman and buying new
    cleats. I would rather not spend money unnecessarily though.

    Any ideas?

  2. I recently had the same problem and went through all the things you've tried ( and more) to
    eliminate the noise. Finally, the culprit turned out to be the stupid Speedplay X-3 pedals. I put my
    trusty old X-1's back on and that eliminated the noise immediately. Try the pedals...

    "Frank & Joni Knox" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    I have a Record drivetrain with around 10,000 miles on it. Lately I've been experiencing a "click"
    on an irregular basis, mostly when applying a lot of pressure to the pedals, which seems to come
    from the


    rear

    Quoted message said:

    derailleur or cassette area. It is lightly audible and can be felt.

    I've tried adjusting the rear derailleur per the instruction book and cleaning and very lightly
    greasing the pawls in the freehub. I torqued


    the

    Quoted message said:

    BB and crank arms to spec. when I originally installed them. The cassette and chain have less than
    1500 miles on them, and I keep them clean. I


    also

    Quoted message said:

    have grease on the outside of the freehub.

    My idea of possible culprits are the IRD 10s snaplink, or the cleats on my shoes (SP Frogs).
    Neither of these seems likely to me, but I'm thinking


    of

    Quoted message said:

    changing the chain to a Wipperman and buying new cleats. I would rather


    not

    Quoted message said:

    spend money unnecessarily though.

    Any ideas?

  3. I have seen excatly the ame with Time magnesium pro pedals. the fix was silicone spray

    "Steve Brunsman" <[email hidden]> skrev i en meddelelse
    news:Buy3b.287423$o%2.133926@sccrnsc02...

    Quoted message said:

    I recently had the same problem and went through all the things you've


    tried

    Quoted message said:

    ( and more) to eliminate the noise. Finally, the culprit turned out to be the stupid Speedplay X-3
    pedals. I put my trusty old X-1's back on and


    that

    Quoted message said:

    eliminated the noise immediately. Try the pedals...

    "Frank & Joni Knox" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    I have a Record drivetrain with around 10,000 miles on it. Lately I've been experiencing a
    "click" on an irregular basis, mostly


    when

    Quoted message said:
    Quoted message said:

    applying a lot of pressure to the pedals, which seems to come from the


    rear

    Quoted message said:

    derailleur or cassette area. It is lightly audible and can be felt.

    I've tried adjusting the rear derailleur per the instruction book and cleaning and very lightly
    greasing the pawls in the freehub. I torqued


    the

    Quoted message said:

    BB and crank arms to spec. when I originally installed them. The


    cassette

    Quoted message said:
    Quoted message said:

    and chain have less than 1500 miles on them, and I keep them clean. I


    also

    Quoted message said:

    have grease on the outside of the freehub.

    My idea of possible culprits are the IRD 10s snaplink, or the cleats on


    my

    Quoted message said:
    Quoted message said:

    shoes (SP Frogs). Neither of these seems likely to me, but I'm thinking


    of

    Quoted message said:

    changing the chain to a Wipperman and buying new cleats. I would rather


    not

    Quoted message said:

    spend money unnecessarily though.

    Any ideas?


  4. "Frank & Joni Knox" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    I have a Record drivetrain with around 10,000 miles on it. Lately I've been experiencing a "click"
    on an irregular basis, mostly when applying a lot of pressure to the pedals, which seems to come
    from the


    rear

    Quoted message said:

    derailleur or cassette area. It is lightly audible and can be felt.

    I've tried adjusting the rear derailleur per the instruction book and cleaning and very lightly
    greasing the pawls in the freehub. I torqued


    the

    Quoted message said:

    BB and crank arms to spec. when I originally installed them. The cassette and chain have less than
    1500 miles on them, and I keep them clean. I


    also

    Quoted message said:

    have grease on the outside of the freehub.

    My idea of possible culprits are the IRD 10s snaplink, or the cleats on my shoes (SP Frogs).
    Neither of these seems likely to me, but I'm thinking


    of

    Quoted message said:

    changing the chain to a Wipperman and buying new cleats. I would rather


    not

    Quoted message said:

    spend money unnecessarily though.

    Any ideas?


    Clicks & creaks on bikes are notoriously difficult to track down. I would certainly check &
    reseat the pedals, cranks, BB and probably the handlebars & stem as well. I would try a different
    set of wheels. It might even be a loose spoke. I would also have a good look at the chain. I
    spent ages trying to find a click last year only for it to be one of the rollers on the chain
    having broken in half.

    Stan Cox

  5. "Frank & Joni Knox" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    I have a Record drivetrain with around 10,000 miles on it. Lately I've been experiencing a "click"
    on an irregular basis, mostly when applying a lot of pressure to the pedals, which seems to come
    from the


    rear

    Quoted message said:

    derailleur or cassette area. It is lightly audible and can be felt.

    I've tried adjusting the rear derailleur per the instruction book and cleaning and very lightly
    greasing the pawls in the freehub. I torqued


    the

    Quoted message said:

    BB and crank arms to spec. when I originally installed them. The cassette and chain have less than
    1500 miles on them, and I keep them clean. I


    also

    Quoted message said:

    have grease on the outside of the freehub.

    My idea of possible culprits are the IRD 10s snaplink, or the cleats on my shoes (SP Frogs).
    Neither of these seems likely to me, but I'm thinking


    of

    Quoted message said:

    changing the chain to a Wipperman and buying new cleats. I would rather


    not

    Quoted message said:

    spend money unnecessarily though.

    Any ideas?

    I had one of these irregular clicks. If it only occurs when you are seated clean and grease the
    saddle rails.

    KC

  6. I have been told to use Teflon (sp?) tape on the BB threads. Course; my problem turned out to be in
    the fame and I got a new one :oD. But with ten thousand miles I doubt your bike is in warrantee or
    it is the weight of your legs creating the problem for the bike.

    "Frank & Joni Knox" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    I have a Record drivetrain with around 10,000 miles on it. Lately I've been experiencing a "click"
    on an irregular basis, mostly when applying a lot of pressure to the pedals, which seems to come
    from the


    rear

    Quoted message said:

    derailleur or cassette area. It is lightly audible and can be felt.

    I've tried adjusting the rear derailleur per the instruction book and cleaning and very lightly
    greasing the pawls in the freehub. I torqued


    the

    Quoted message said:

    BB and crank arms to spec. when I originally installed them. The cassette and chain have less than
    1500 miles on them, and I keep them clean. I


    also

    Quoted message said:

    have grease on the outside of the freehub.

    My idea of possible culprits are the IRD 10s snaplink, or the cleats on my shoes (SP Frogs).
    Neither of these seems likely to me, but I'm thinking


    of

    Quoted message said:

    changing the chain to a Wipperman and buying new cleats. I would rather


    not

    Quoted message said:

    spend money unnecessarily though.

    Any ideas?

  7. jmkfmk-<< I have a Record drivetrain with around 10,000 miles on it. Lately I've been experiencing a
    "click" on an irregular basis, mostly when applying a lot of pressure to the pedals, which seems to
    come from the rear derailleur or cassette area. It is lightly audible and can be felt. >><BR><BR>

    Also a wee bit of lube on the opitside of the freehub body and ensure the cogset lockring is TIGHT.

    Pedals are a very common place for noise as well.

    Also ensure the chainring bolts as well as the flats on the crank where the rings live have a little
    grasso on them.

    Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
    (303)440-3535 vecchios.comvecchios.com "Ruote convenzionali costruite eccezionalmente bene"

  8. "Frank & Joni Knox" <[email hidden]> wrote in message
    news:<[email hidden]>...

    Quoted message said:

    I have a Record drivetrain with around 10,000 miles on it. Lately I've been experiencing a "click"
    on an irregular basis, mostly when applying a lot of pressure to the pedals, which seems to come
    from the rear derailleur or cassette area. It is lightly audible and can be felt.

    I've tried adjusting the rear derailleur per the instruction book and cleaning and very lightly
    greasing the pawls in the freehub. I torqued the BB and crank arms to spec. when I originally
    installed them. The cassette and chain have less than 1500 miles on them, and I keep them clean. I
    also have grease on the outside of the freehub.

    My idea of possible culprits are the IRD 10s snaplink, or the cleats on my shoes (SP Frogs).
    Neither of these seems likely to me, but I'm thinking of changing the chain to a Wipperman and
    buying new cleats. I would rather not spend money unnecessarily though.

    Any ideas?

    Irregular with regularity perhaps? Does it come always on the downstroke on one side but not on
    every downstroke? If so, you are talking about a cassette, chain or spoke problem. Got a spare set
    of wheels you can temporarily throw on for diagnostic purposes? Or an old (or a buddy's) chain? I
    had a very similar problem which turned out to be the cassette. Well, ok, it was the cassette
    (dirty), my headset (dirty and dry) and an insufficiently tightened front QR. Made for a whole
    passel o' creakage which drove me goofy.

    I did silence them all, however. Blessed silence - the joy of riding a properly tuned and
    functioning bicycle is nearly singular in this world. Guess I just need to do more PM.

    Good luck,

    App

  9. "Frank & Joni Knox" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    I have a Record drivetrain with around 10,000 miles on it. Lately I've been experiencing a "click"
    on an irregular basis, mostly when applying a lot of pressure to the pedals, which seems to come
    from the rear derailleur or cassette area. It is lightly audible and can be felt.

    I've tried adjusting the rear derailleur per the instruction book and cleaning and very lightly
    greasing the pawls in the freehub. I torqued the BB and crank arms to spec. when I originally
    installed them. The cassette and chain have less than 1500 miles on them, and I keep them clean. I
    also have grease on the outside of the freehub.

    My idea of possible culprits are the IRD 10s snaplink, or the cleats on my shoes (SP Frogs).
    Neither of these seems likely to me, but I'm thinking of changing the chain to a Wipperman and
    buying new cleats. I would rather not spend money unnecessarily though.

    A new chain is a cheap experiment, you'll need it eventually anyway.

  10. Quoted message said:

    "Frank & Joni Knox" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    I have a Record drivetrain with around 10,000 miles on it. Lately I've been experiencing a
    "click" on an irregular basis, mostly


    when

    Quoted message said:
    Quoted message said:

    applying a lot of pressure to the pedals, which seems to come from the


    rear

    Quoted message said:

    derailleur or cassette area. It is lightly audible and can be felt.

    I've got the same thing going on right now, except that mine is regular...every turn of the
    crank. It *feels* like a chainring bolt (which I haven't seen anybody mention yet), but I'm sure
    I'm wrong. 🙂

    As soon as I make some time, I'm going to clean the drive train anyway, so for now I just click away
    on the hills.

    Sure is annoying, tho!

    Lee

  11. In article <[email hidden]>, [email hidden] (Qui si parla

    Campagnolo) said:

    Also a wee bit of lube on the opitside of the freehub body and ensure the cogset lockring
    is TIGHT.

    ditto that. my set has excessive clearance between the cassette carriers and the freehub body that
    causes a clicking that drives me NUTS. a little grease on the outside of the freehub body seems to
    take care of it temporarily, but i wish this outrageously expensive hub/cassette set was half as
    quiet as my 105 setup. (total cost for wheel, spokes, hub and cassete: $80!)

    also: a schmear of grease on the face of the inner carrier where it meets the outer carrier
    couldn't hurt.

  12. "Lee" <[email hidden]> wrote in :"]news:[email hidden]:

    Quoted message said:

    I've got the same thing going on right now, except that mine is regular...every turn of the crank.
    It *feels* like a chainring bolt (which I haven't seen anybody mention yet), but I'm sure I'm
    wrong. 🙂


    I had exactly that noise and frequency. It started on a climb and was annoying as hell. Turned it
    was the chainstay cracked through at the dropout. Ruined cycling on my vacation.

  13. "Mike Latondresse" <[email hidden]> wrote in message "]news:[email hidden]...

    Quoted message said:

    "Lee" <[email hidden]> wrote in :"]news:[email hidden]:

    Quoted message said:

    I've got the same thing going on right now, except that mine is regular...every turn of the
    crank. It *feels* like a chainring bolt (which I haven't seen anybody mention yet), but I'm sure
    I'm wrong. 🙂


    I had exactly that noise and frequency. It started on a climb and was annoying as hell. Turned it
    was the chainstay cracked through at the dropout. Ruined cycling on my vacation.

    Okay. I gotta clean my bike up and get rid of that noise!

    Everything looks in good shape...no frame parts coming apart. But I'm going to exorcise that noise!

    Lee

  14. "Qui si parla Campagnolo" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    jmkfmk-<< I have a Record drivetrain with around 10,000 miles on it. Lately I've been experiencing
    a "click" on an irregular basis, mostly when applying a lot of pressure to the pedals, which seems
    to come from the


    rear

    Quoted message said:

    derailleur or cassette area. It is lightly audible and can be felt.

    Quoted message said:

    <BR><BR>

    Also a wee bit of lube on the opitside of the freehub body and ensure the cogset lockring
    is TIGHT.

    Pedals are a very common place for noise as well.

    Also ensure the chainring bolts as well as the flats on the crank where


    the

    Quoted message said:

    rings live have a little grasso on them.

    Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
    (303)440-3535 vecchios.comvecchios.com "Ruote convenzionali costruite eccezionalmente bene"

    Thanks (to you and everyone else who replied) for the suggestions. I'll try a Wipperman chain and
    new Frog cleats to start with since I torqued everything to Campy directions and greased the freehub
    body from the start. Might as well take the rings off and grease those bolts and flats too...

  15. "Frank & Joni Knox" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    I have a Record drivetrain with around 10,000 miles on it. Lately I've been experiencing a "click"
    on an irregular basis, mostly when applying a lot of pressure to the pedals, which seems to come
    from the


    rear

    Quoted message said:

    derailleur or cassette area. It is lightly audible and can be felt.

    I've tried adjusting the rear derailleur per the instruction book and cleaning and very lightly
    greasing the pawls in the freehub. I torqued


    the

    Quoted message said:

    BB and crank arms to spec. when I originally installed them. The cassette and chain have less than
    1500 miles on them, and I keep them clean. I


    also

    Quoted message said:

    have grease on the outside of the freehub.

    My idea of possible culprits are the IRD 10s snaplink, or the cleats on my shoes (SP Frogs).
    Neither of these seems likely to me, but I'm thinking


    of

    Quoted message said:

    changing the chain to a Wipperman and buying new cleats. I would rather


    not

    Quoted message said:

    spend money unnecessarily though.

    Any ideas?

    Thanks for the suggestions everyone. I installed a Wipperman chain and connector and that seems to
    have solved the problem.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.