Australia and New Zealand · Public discussion

Ti frame and probikekit order

Started by David M · · Last activity · 5 posts · 761 views

This thread is locked and is currently read-only.

Thread details

What we know about this thread

Original section
Australia and New Zealand
Published
15 September 2005
Last activity
18 September 2005
Original author
David M
Posts
5
Discussion status
Public discussion
Total views
761
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–5 of 5
Posts remain in their original chronological order.

Text size
  1. Usually I look forward to cycling retail therapy, but not when it's due
    to having stuff pinched..

    Anyway, will be ordering a Ti frame and bits from XACD in the next few
    days, and some probikekit.com stuff soon thereafter. If any of y'all
    want to get some stuff in my order, let me know. I can then either
    xpresspost bag it out to you, or you can pick it up from me in Perth.
    Share cost of shipping and duty etc pro-rata. Will still be a LOT
    cheaper than Aus prices.

    Mid next week for Ti order I'm guessing, and toward the end of the week
    for the balance of the stuff.

    Cheers
    David M

  2. dang! Im still awaiting council damages claim before I put in my xacd order.
    Seeing as they are churning out slightly different frames/tubing for setavento.com (amongst others) it might be worth asking what they offer now in way of variations, or simply say you want a 'setavento-type' frame.
    the tubing they use is butted now (at least for them), as opposed to what was straight gauge stuff previously.

    let us know how you go and mandatory pix please 😄

  3. hmmm....good call. I'll ask them and see what they say.

  4. "David M" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    Usually I look forward to cycling retail therapy, but not when it's due
    to having stuff pinched..

    Anyway, will be ordering a Ti frame and bits from XACD in the next few
    days, and some probikekit.com stuff soon thereafter. If any of y'all
    want to get some stuff in my order, let me know. I can then either
    xpresspost bag it out to you, or you can pick it up from me in Perth.
    Share cost of shipping and duty etc pro-rata. Will still be a LOT
    cheaper than Aus prices.

    Mid next week for Ti order I'm guessing, and toward the end of the week
    for the balance of the stuff.

    Cheers
    David M

    I bought one of these frames a couple of years ago. I sent the money from
    the Commonwealth Bank and paid the fees assuming all would be fine. However
    the money went from the Commonwealth Bank, via the New York Bank then the
    Bank Of China.
    Of course all of the banks wanted a cut so when the money arrived in XACD's
    account it was short.

    My recommendation would be to try and find a Bank of China branch (if you
    can) and deposit there as it may save some heartache and fees.
    BTW all worked out in the end

    Peter

  5. Thanks Peter. I've done it a couple of times before and noted now that
    XACD include $25 allowance in their quote for "bank charges" I can't
    recall them doing that before so I assume it's a common issue. My
    solution in the past has been to order an additional seatpost or other
    small bit and that can be sacraficial if needed.

    Cheers
    David M

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.