Hello
A threaded fork can be cut down if it is to long correct? I just thought i would ask. This seems obvious but wanted to make sure!!
Thanks
Cycling Equipment · Public discussion
Fork length
This thread is locked and is currently read-only.
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 27 August 2005
- Last activity
- 29 August 2005
- Original author
- Fizzy23
- Posts
- 5
- Discussion status
- Public discussion
- Total views
- 845
- Views / 30 days
- 0
- Topics
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
Fizzy23 said:
Hello
A threaded fork can be cut down if it is to long correct? I just thought i would ask. This seems obvious but wanted to make sure!!
Thanks
Only to a degree and depending on how much thread you have to start with.
-
Has 50 mm of thread and 174 total length. Will probably need to cut 2 cm off, will this leave enough thread?
-
Fizzy23 said:
Has 50 mm of thread and 174 total length. Will probably need to cut 2 cm off, will this leave enough thread?
Have no clue.Duno what your headtube length or HS stack height are. Put it together and figure it out.gotta have threads for the adjusting cup and locknut. I got no issue in leaving a 10mm spacer just for grins and contingincies.
-
the thread could be cut down longer with one of these
http://www.billys.co.uk/billys/english/group.php?prod=2cs-forkthreadset-1i
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.