UK and Europe · Public discussion

8Freight

Started by Jon Senior · · Last activity · 21 posts · 1,406 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
UK and Europe
Published
10 May 2005
Last activity
12 May 2005
Original author
Jon Senior
Posts
21
Discussion status
Public discussion
Total views
1,406
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–20 of 21
Posts remain in their original chronological order.

Text size
  1. I borrowed the 8Freight from the Bike Station today to pick some some
    old tape reels from a colleague (About 100 hours of opera... recording
    to commence immediately!). His wife thought we were joking when we were
    talking about loading them onto the bike.

    Observations:

    - Very comfortable. Would be more so if I had adjusted the saddle
    slightly... or with a better saddle.
    - Flex in the "fork"! Not really an issue, but with the front brake on
    and pushing (As one would test a headset) the crown twists noticeably.
    Quite disconcerting when stopping hard at lights.
    - You can't endo it! ;-)
    - As with a recumbent, expect strange looks from passersby.
    - Storage? You must be kidding. It fits in the stairwell but I'm pretty
    much reliant on being the first one out in the morning otherwise they'll
    be some complaints.

    Still cool though. Feels very strange when cornering. Far less lean than
    a normal bike and a very peculiar sensation to not have the rear wheel
    track the front.

    Jon

  2. Jon Senior said:

    - Very comfortable. Would be more so if I had adjusted the saddle
    slightly... or with a better saddle.

    I ordered mine with just an "old fashioned" seatpost rather than a
    default saddle, as my B66 was lined up to go on it.

    Quoted message said:

    - Flex in the "fork"! Not really an issue, but with the front brake on
    and pushing (As one would test a headset) the crown twists noticeably.
    Quite disconcerting when stopping hard at lights.

    Never noticed this on mine...

    Quoted message said:

    - You can't endo it! ;-)

    Indeed. With pretty serious committed effort you /can/ wheelie the
    front wheel about a couple of inches, which is actually quite handy on
    some of the more savage dropped kerbs. Particularly the one between the
    Riverside cycle path and the dump road in Dundee!
    I wouldn't try and hop it up a full kerb, partly I doubt I'd manage and
    after that one does wonder about scraping the stand, frame and
    transmission before the back wheel got up.

    Quoted message said:

    - As with a recumbent, expect strange looks from passersby.

    Especially with an ostentatious load! Unlike the 'bent, I can't recall
    anyone laughing at it.

    Quoted message said:

    Still cool though. Feels very strange when cornering. Far less lean than
    a normal bike and a very peculiar sensation to not have the rear wheel
    track the front.

    I guess it's probably a bit like a tandem ridden solo. You do get used
    to it pretty quickly, including the gotcha of squeezing through gaps
    /and/ remembering the frame around the cargo bin sticks out a bit...

    Still very pleased with mine, it's done a lot of jobs I'd have used the
    car for before, and a lot of shopping I would have done by bike and lost
    a total of several hours of my life packing bags where I just lower a
    crate into the back of the 8. A trailer would be a more immediately
    sensible solution for a lot of people as the 8 does need considerable
    storage space and doesn't really do anything well aside from cart stuff
    about, but if you /are/ carting stuff and have a suitable shed/garage
    it's well worth a look.

    Pete.
    --
    Peter Clinch Medical Physics IT Officer
    Tel 44 1382 660111 ext. 33637 Univ. of Dundee, Ninewells Hospital
    Fax 44 1382 640177 Dundee DD1 9SY Scotland UK
    net [email hidden] http://www.dundee.ac.uk/~pjclinch/

  3. Jon Senior said:

    - As with a recumbent, expect strange looks from passersby.

    I saw one coming through Hyde Park the other day with a computer on the
    back, though much to my disappointment the rider was pushing it rather
    than riding it - I nearly offered to ride it for him and let him go on
    my unladen bike. I've decided I want one very badly, especially as we
    are moving to live in the countryside soon and I'm keen not to end up
    in a situation where I need to use the car for everything.

    (I've already had special dispensation from the management to build a
    proper bike shed when we move, so I ought to get some bikes to put in
    it!)

    d.

  4. in message <[email hidden]>, Peter Clinch

    (') said:


    Still very pleased with mine, it's done a lot of jobs I'd have used
    the car for before, and a lot of shopping I would have done by bike
    and lost a total of several hours of my life packing bags where I just
    lower a
    crate into the back of the 8. A trailer would be a more immediately
    sensible solution for a lot of people as the 8 does need considerable
    storage space and doesn't really do anything well aside from cart
    stuff about, but if you /are/ carting stuff and have a suitable
    shed/garage it's well worth a look.

    Yes, I was wondering about how it compared in practice with a trailer.
    What do you feel the benefits of the 8freight are over a hack-bike and
    trailer?

    --
    [email hidden] (Simon Brooke) http://www.jasmine.org.uk/~simon/

    ;; Men never do evil so completely and cheerfully as when they
    ;; do it from  religious conviction."          -- Pascal

  5. davek said:

    I saw one coming through Hyde Park the other day with a computer on the
    back, though much to my disappointment the rider was pushing it rather
    than riding it - I nearly offered to ride it for him and let him go on
    my unladen bike. I've decided I want one very badly

    The Burrows Powermatic Deluxe stand[1] has that effect on people... ;-)

    Bikefix will let you have a test ride or short-term hire if you want to
    give one a proper go before spending the readies. I tried out one of
    theirs while leaving my dad as hostage to make sure I took it back when
    I was visiting the Smoke a couple of years ago. Not terribly practical
    for me to buy it in London, so by way of thanks for the test ride the
    front Klickfix bag came from them.

    Pete.

    [1] it is actually a very good bit of design and improves the utility of
    the bike quite noticeably for getting both yourself and cargo on and off
    the bike.
    --
    Peter Clinch Medical Physics IT Officer
    Tel 44 1382 660111 ext. 33637 Univ. of Dundee, Ninewells Hospital
    Fax 44 1382 640177 Dundee DD1 9SY Scotland UK
    net [email hidden] http://www.dundee.ac.uk/~pjclinch/

  6. Peter Clinch said:

    I ordered mine with just an "old fashioned" seatpost rather than a
    default saddle, as my B66 was lined up to go on it.

    Being a Bikestation one this is ready for anyone. Consequently it has a
    wide "comfort" saddle on it. Uncomfortable!

    Quoted message said:

    Never noticed this on mine...

    The design has changed somewhat. Two key things being:

    1) The front fork has rotated (Blade now on right). On our other
    8Freight it is on the left.
    2) The derailleur hanger is now made of mild steel. This is a bit naff
    as to keep the weight down a thinner gauge of metal is used and
    consequently it bends more! I think we were talking about getting an
    old style alu one.
    3) The load carrier is a slightly different shape (The trangulation on
    the rear platform is reversed). AFAIK it rides the same but it'd be
    interesting to know the reason behind the changes... maybe I'll try and
    corner Mr Burrows at York again!

    Quoted message said:

    Indeed. With pretty serious committed effort you /can/ wheelie the
    front wheel about a couple of inches, which is actually quite handy


    on

    Quoted message said:

    some of the more savage dropped kerbs. Particularly the one between


    the

    Quoted message said:

    Riverside cycle path and the dump road in Dundee!
    I wouldn't try and hop it up a full kerb, partly I doubt I'd manage


    and

    Quoted message said:

    after that one does wonder about scraping the stand, frame and
    transmission before the back wheel got up.

    It does force you to plan ahead a little better than an ordinary bike.

    Quoted message said:

    Especially with an ostentatious load! Unlike the 'bent, I can't


    recall

    Quoted message said:

    anyone laughing at it.

    The load was mostly unnoticeable, but our hi-tech retaining mechanism
    consists of a bunch of old inner tubes tied to the frame.

    Quoted message said:

    I guess it's probably a bit like a tandem ridden solo. You do get


    used

    Quoted message said:

    to it pretty quickly, including the gotcha of squeezing through gaps
    /and/ remembering the frame around the cargo bin sticks out a bit...

    The only tandem that I've ridden had a much shorter wheel base than the
    8Freight.

    Quoted message said:

    Still very pleased with mine, it's done a lot of jobs I'd have used


    the

    Quoted message said:

    car for before, and a lot of shopping I would have done by bike and


    lost

    Quoted message said:

    a total of several hours of my life packing bags where I just lower a

    Quoted message said:

    crate into the back of the 8. A trailer would be a more immediately
    sensible solution for a lot of people as the 8 does need considerable

    Quoted message said:

    storage space and doesn't really do anything well aside from cart


    stuff

    Quoted message said:

    about, but if you /are/ carting stuff and have a suitable shed/garage

    Quoted message said:

    it's well worth a look.

    Well. I rode it to work today so here are some further observations.

    1: Unladen (mostly) I can ride it over Arthur's seat (Didn't time it.
    Sorry!). If I had to climb hills like that with a load, I'd probably
    consider a mountain drive.
    2: Twitchy. It appears to have close to 0 trail and until you get used
    to it, can feel quite twitchy. That said, I managed to descend the
    aforementioned hill without any grief although I took the roundabout at
    the bottom considerably more cautiously than normal.
    3: Once you get a feel for it it's quite good. I even managed to filter
    through traffic at one point, but obviously sharp turns around
    stationary cars are not an option.
    4: Comfort saddles aren't! Not even close. I might look at swapping the
    BG2 from the fixer onto it for the ride back!
    5: My colleagues were very impressed. One guy was semi-seriously
    interested in getting one for the company with appropriate branding for
    small deliveries around town. Jobs where a large box van is just too
    big. That may be the challenge for the year.

    On the Bikefix website there is a great photo of Herr Burrows using an
    8Freight to transport a Ratcatcher. Impressed.

    Jon

  7. Peter Clinch said:

    The Burrows Powermatic Deluxe stand[1] has that effect on people...


    ;-)

    I've not seen it in action, but the mere idea of it is exciting enough!
    ;-)

    Quoted message said:

    Bikefix will let you have a test ride or short-term hire if you want


    to

    Quoted message said:

    give one a proper go before spending the readies.

    Cool. That is one shop in which I would find it far too easy to blow
    several thousand pounds without trying. The day I win the lottery [1]
    is likely to be a good day for business for them...

    d.

    1. Not likely, /especially/ since I don't do the lottery.

  8. Simon Brooke said:

    Yes, I was wondering about how it compared in practice with a trailer.
    What do you feel the benefits of the 8freight are over a hack-bike and
    trailer?

    It carries unwieldy loads better because it's designed for load lugging
    from the ground up. The first obvious point is you've got a completely
    stable platform to load and unload to and from, and you can [dis]mount
    the bike without having to hang onto it at all. Parking brake and wide,
    stable remote operated stand do make a very tangible difference, as does
    the much lower crossbar when it comes to getting on and off with a high,
    unwieldy load behind the saddle that gets in the way of swinging a leg
    over. The low bottom bracket means you can have the saddle set at a
    good pedalling height and get your feet well on the floor while stopped
    at junctions without having to get out of the saddle, quite handy with a
    fridge in full packing behind you trying to tip the bike over at any
    available opportunity[1].

    Another point about loading is you can be rather more creative in what
    you put on because you've got a wide load area where the top is flat and
    entirely above the rear wheel, so long loads can just be overhung. Also
    no articulation to worry about, so you have a much longer effective
    usable space.

    The more outrageous the load is the more the 8 will be better, I think.
    So for a wee trolley load from Tescos, not really much to be gained,
    but getting a two seater sofa on the back of the 8 wasn't actually too
    much trouble but I really don't know where I'd start if I had a BOB or a
    Burley and an MTB tug for the job.

    Pete.

    [1] leaving it in the box and packing meant it wouldn't sit *in* the
    load bin, so it had to go higher up. Most loads can have the weight
    kept very low, and very stable, but there are exceptions...
    --
    Peter Clinch Medical Physics IT Officer
    Tel 44 1382 660111 ext. 33637 Univ. of Dundee, Ninewells Hospital
    Fax 44 1382 640177 Dundee DD1 9SY Scotland UK
    net [email hidden] http://www.dundee.ac.uk/~pjclinch/

  9. Jon is Away! said:

    2) The derailleur hanger is now made of mild steel. This is a bit
    naff as to keep the weight down a thinner gauge of metal is used
    and consequently it bends more! I think we were talking about
    getting an old style alu one.

    I can't believe the weight of the derailleur hanger is a serious
    consideration on a load lugger like the 8Freight.

    --
    Dave...

  10. Jon is Away! said:

    Well. I rode it to work today so here are some further observations.

    1: Unladen (mostly) I can ride it over Arthur's seat (Didn't time it.
    Sorry!). If I had to climb hills like that with a load, I'd probably
    consider a mountain drive.

    I did wonder if it would want downgearing when I got it, having got it
    up Blackness Road okay empty but thinking 50 Kg of coal would put paid
    to that. But trying it I found it was okay. But Schlumpfing it is a
    longer term possibility.

    Quoted message said:

    2: Twitchy. It appears to have close to 0 trail and until you get used
    to it, can feel quite twitchy. That said, I managed to descend the
    aforementioned hill without any grief although I took the roundabout at
    the bottom considerably more cautiously than normal.

    Yes. It won't ride no-handed, or such is my impression with (very
    brief!) experimentation. But like many 'bents, once you're used to the
    differences from "normal" it's remarkably stable with very little
    steering input.

    Quoted message said:

    On the Bikefix website there is a great photo of Herr Burrows using an
    8Freight to transport a Ratcatcher. Impressed.

    Mine's done the easier job of the Brompton. Ride to station to collect
    friend, she goes on the Brom, her bag goes in the back of the 8, we ride
    home. Quite a neat setup!

    Pete.
    --
    Peter Clinch Medical Physics IT Officer
    Tel 44 1382 660111 ext. 33637 Univ. of Dundee, Ninewells Hospital
    Fax 44 1382 640177 Dundee DD1 9SY Scotland UK
    net [email hidden] http://www.dundee.ac.uk/~pjclinch/

  11. dkahn400 said:

    I can't believe the weight of the derailleur hanger is a serious
    consideration on a load lugger like the 8Freight.

    Does seem a bit odd, but having said that... it is remarkably light for
    what it is, at about 20 Kg (to put this in perspective, abut the same
    weight as the Streetmachine!). The balance point when it's unladen is
    at the front of the load area and I can pick the whole bike up with two
    fingers around the load area's enclosing frame just behind the saddle.
    Compare and contrast with a more typical Bakfiets and I think you'll
    notice quite a difference up a hill!

    Normal weightweenyism is about getting an extra 0.1 mph up the hill,
    with freight bikes it's more about whether you get off and walk or not...

    Pete.
    --
    Peter Clinch Medical Physics IT Officer
    Tel 44 1382 660111 ext. 33637 Univ. of Dundee, Ninewells Hospital
    Fax 44 1382 640177 Dundee DD1 9SY Scotland UK
    net [email hidden] http://www.dundee.ac.uk/~pjclinch/

  12. Peter Clinch said:

    I did wonder if it would want downgearing when I got it, having got


    it

    Quoted message said:

    up Blackness Road okay empty but thinking 50 Kg of coal would put


    paid

    Quoted message said:

    to that. But trying it I found it was okay.

    I'm sure you've answered this before, but what is the gearing range on
    yours?

    Quoted message said:

    Yes. It won't ride no-handed, or such is my impression with (very
    brief!) experimentation. But like many 'bents, once you're used to


    the

    Quoted message said:

    differences from "normal" it's remarkably stable with very little
    steering input.

    I'd be concerned about going downhill with a full load - but much less
    concerned than if I was carrying the same load on a trailer.

    And talking of going downhill with a full load... what are the brakes
    like?

    d.

  13. davek said:

    I'm sure you've answered this before, but what is the gearing range on
    yours?

    According to the review at
    http://www.velovision.co.uk/mag/issue9/8freight.pdf it's 28-85", which
    seems about right. I wouldn't object to bottom being lower but I
    wouldn't want to bring top down by a third! That review was what really
    turned me on to the idea of the bike, and it seems fair comment looking
    back at it with hindsight

    Quoted message said:

    I'd be concerned about going downhill with a full load - but much less
    concerned than if I was carrying the same load on a trailer.

    Quoted message said:

    And talking of going downhill with a full load... what are the brakes
    like?

    They're okay. Not your hydraulic discs by any stretch of the
    imagination but they do the job, and Dundee has some Real Hills (TM)
    where I've tried them out...

    Pete.
    --
    Peter Clinch Medical Physics IT Officer
    Tel 44 1382 660111 ext. 33637 Univ. of Dundee, Ninewells Hospital
    Fax 44 1382 640177 Dundee DD1 9SY Scotland UK
    net [email hidden] http://www.dundee.ac.uk/~pjclinch/

  14. in message <[email hidden]>, Jon

    is Away! (') said:

    5: My colleagues were very impressed. One guy was semi-seriously
    interested in getting one for the company with appropriate branding
    for small deliveries around town. Jobs where a large box van is just
    too big. That may be the challenge for the year.

    In the issue of VeloVision on freight bikes recently there was an
    article about an audio-visual firm in London who use a specially
    adapted 8freight. It had tubes along the outside of the freight area
    for carrying projection screens, and possibly some other adaptations.
    The company using it said it was very effective both as a marketing aid
    and in moving stuff rapidly in inner city areas.

    I could look out the article if you like.

    --
    [email hidden] (Simon Brooke) http://www.jasmine.org.uk/~simon/

    ;; When your hammer is C++, everything begins to look like a thumb.

  15. Peter Clinch said:

    Bikefix will let you have a test ride or short-term hire if you want


    to

    Quoted message said:

    give one a proper go before spending the readies.

    I'm not sure that the Bike Station isn't missing out on a marketing
    opportunity here. They have 2 x 8Freights and One Less Car trike which
    could be hired out as either manned or unmanned. Instead, they do seem
    to spend a large amount of time collecting dust. I'm sure that they do
    get used, but it'd be great to see them out on the streets with the
    Bike Station logo on the sides.

    Jon

  16. "davek" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:
    Jon Senior said:

    - As with a recumbent, expect strange looks from passersby.

    I saw one coming through Hyde Park the other day with a computer on the
    back, though much to my disappointment the rider was pushing it rather
    than riding it - I nearly offered to ride it for him and let him go on
    my unladen bike. I've decided I want one very badly, especially as we
    are moving to live in the countryside soon and I'm keen not to end up
    in a situation where I need to use the car for everything.

    (I've already had special dispensation from the management to build a
    proper bike shed when we move, so I ought to get some bikes to put in
    it!)

    d.

    Interestingly the LondonSkate now has one to transport the music. 🙂

    www.LondonSkate.com

  17. Simon Brooke said:

    I could look out the article if you like.

    The company is AV2Hire (www.av2hire.com) and their custom 8Freight is a
    cool looking beast. The MD didn't seem too keen on the idea when I
    pitched it to him this afternoon, but he might be more interested when I
    see him tomorrow and tell him about the successful journey back (Details
    in another post).

    Jon

  18. To continue the saga of the 8Freight:

    The journey home from work involved the transport of 2 Revox
    reel-to-reel tape decks and some cable (~35kg of cable in fact!). Total
    combined weight of around 90kg + me + my stuff (< 10kg).

    All in I moved around 200kg up Leith Walk.

    When moving it around inside the Warehouse ("No way. You're never going
    to ride that. You'll die!"😉 it felt distinctly unstable and liable to
    fall over. I was beginning to wonder if I might be pushing my luck but I
    got it out into the carpark anyway.

    I set off with some trepidation and discovered that once you get it
    rolling it suddenly becomes amazingly stable and aside from a drop in
    speed, handles the same as when unladen.

    One convert here!

    Jon

  19. Jon Senior said:

    The journey home from work involved the transport of 2 Revox
    reel-to-reel tape decks and some cable (~35kg of cable in fact!). Total
    combined weight of around 90kg + me + my stuff (< 10kg).

    I feel some sort of suspension option might be handy for delicates: I'm
    not sure I'd want to move Revoxs about on a regular basis! I've
    doctored mine a little with pipe lagging on the frame spars that take
    the plywood load base, which has the happy side effect of stopping it
    rattling when unladen and ridden over rougher roads.

    Pete.
    --
    Peter Clinch Medical Physics IT Officer
    Tel 44 1382 660111 ext. 33637 Univ. of Dundee, Ninewells Hospital
    Fax 44 1382 640177 Dundee DD1 9SY Scotland UK
    net [email hidden] http://www.dundee.ac.uk/~pjclinch/

  20. Peter Clinch said:

    Mine's done the easier job of the Brompton. Ride to station to
    collect friend, she goes on the Brom, her bag goes in the back of the
    8, we ride home. Quite a neat setup!


    It's relatively easy to strap a Brompton onto a pannier rack anyway, though.

    A

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.