"Drop 41" <[email hidden]> wrote in message news:A7OWc.33714
Quoted message said:Thanks to Dr Atkins I need to take in the waist on even the new pair of sz
12 jeans I just bought ๐
Anyone have good tips for doing this? I need to take them in ALOT but only
in the waist. I can't wear a belt anymore- they are too bunched up looking
and it looks bulky and is not comfy.
Sure, I do this all the time with my pants (although you can really only
take in so much before it becomes a lost cause and you have to get a smaller
size).
You will probably want to first mark how much you need to take them in. Try
on the pants, and in the back, pull the excess where the top of the
waistband meets your lower back. Then, with the pant seam pulled out, make
the sides of the fabric touch each other. You can mark each side with a
safety pin, or with some chalk.
Then turn the pants inside out... put those marks together, and sew a new
seam. Taper your stitch so that the new seam heads toward the old seam and
meets up before the lower butt area where you may need more room. It will
look like a triangle. I hope this make sense, it's very easy to do but
strange writing the instructions. From the outside of the pants (what
everybody else sees) they will basically look normal. You will end up with
the extra fabric folded kind of lumpy inside the pants in the back (the more
you take in the waist, the larger the lump) but this is hidden from the view
of others. It doesn't sound to me like you will be taking them in by all
that much since the pants fit the rest of you.
Good luck!
--
Spring
LC since 1/1/04
260/208/170
http://f2.pg.photos.yahoo.com/ph/sprgsnow/album?.tok=phX4sVBBuvxvs4Hs&.dir=/55b8&.src=ph
Size: 24W / 14 / 10