Looking for the definitive answer, we (TINW) all realise that drafting someone saves alot of energy but does the person bieng "drafted"(?) have to do extra work or is it a "please don't invade my space" thing that means people don't like being drafted by perfect strangers ? -- yours S
Looking for the definitive answer, we (TINW) all realise that drafting someone saves alot of energy but does the person bieng "drafted"(?) have to do extra work or is it a "please don't invade my space" thing that means people don't like being drafted by perfect strangers ? -- yours S
Nihil curo de ista tua stulta superstitione
Wheelsucking is advantageous because the leading rider opens the space in the air for the sucker to ride through. A sole rider still has to do this so he does not work harder if there is someone wheelsucking. Get your mate to suck your wheel then arrange for him to drop off, you won't realise he has gone.
I think people simply consider it rude to take a free (reduced cost) ride without the other persons knowledge.
Looking for the definitive answer, we (TINW) all realise that drafting someone saves alot of energy but does the person bieng "drafted"(?) have to do extra work or is it a "please don't invade my space" thing that means people don't like being drafted by perfect strangers ?
There shouldn't be any extra work involved, but drafting properly means close and that means very little space to react. If I'm being drafted and want to brake for something and someone is a few inches off my back wheel there's a very good chance there'll be some sort of prang.
Racers should have the riding discipline to deal okay with that and it's all part of the game, but for utility riding it's (a) rather inconsiderate to force someone else to worry about you tailgating them without asking them first and (b) people have no idea how good a perfect stranger is at doing it safely.
Pete. -- Peter Clinch Medical Physics IT Officer Tel 44 1382 660111 ext. 33637 Univ. of Dundee, Ninewells Hospital Fax 44 1382 640177 Dundee DD1 9SY Scotland UK net [email hidden] http://www.dundee.ac.uk/~pjclinch/
There shouldn't be any extra work involved, but drafting properly means close and that means very little space to react. If I'm being drafted and want to brake for something and someone is a few inches off my back wheel there's a very good chance there'll be some sort of prang.
Sometimes a touch on the brakes can work wonders ;-) [1] And the person who tumbles is nearly always the following rider as they lose their steering.
On 19 Oct 2004 03:08:12 -0700, "MSeries" <[email hidden]>
Quoted message said:
soup said:
Looking for the definitive answer, we (TINW) all realise that drafting someone saves alot of energy but does the person bieng "drafted"(?) have to do extra work or is it a "please don't invade my space" thing that means people don't like being drafted by perfect strangers ? -- yours S
Nihil curo de ista tua stulta superstitione
Wheelsucking is advantageous because the leading rider opens the space in the air for the sucker to ride through. A sole rider still has to do this so he does not work harder if there is someone wheelsucking. Get your mate to suck your wheel then arrange for him to drop off, you won't realise he has gone.
Ah, but G=(m-m'😉/r^2 or something like that. The closer the drafter gets, the more he pulls back the leader back :-)
AFAIK the leader gains a very small benefit from being drafted, nowhere near as much as the drafter of course. Something about a slight reduction in the low pressure behind the leader.
Looking for the definitive answer, we (TINW) all realise that drafting someone saves alot of energy but does the person bieng "drafted"(?) have to do extra work or is it a "please don't invade my space" thing that means people don't like being drafted by perfect strangers ?
One concern is that if you have to brake suddenly you don't want to be hit by someone just behind you...
Looking for the definitive answer, we (TINW) all realise that drafting someone saves alot of energy but does the person bieng "drafted"(?) have to do extra work or is it a "please don't invade my space" thing that means people don't like being drafted by perfect strangers ?
Unless you're in a situation where it's expected -- don't draft riders you don't know.
Looking for the definitive answer, we (TINW) all realise that drafting someone saves alot of energy but does the person bieng "drafted"(?) have to do extra work or is it a "please don't invade my space" thing that means people don't like being drafted by perfect strangers ?
Certainly in NASCAR racing, two (or three) cars drafting can go faster than either one alone. Aerodynamically, the train of cars is a single long and thin body, which cuts resistance for everyone. The lead car gets a performance boost from being drafted.
However, an acquaintance of mine and an Olympic cycling hopeful was killed trying to draft a dump truck, so be sure your leader knows he's being followed.
There shouldn't be any extra work involved, but drafting properly means close and that means very little space to react. If I'm being drafted and want to brake for something and someone is a few inches off my back wheel there's a very good chance there'll be some sort of prang.
Sometimes a touch on the brakes can work wonders ;-) [1]
braking puts you immediately in the clueless category! 'accepted' behaviour consists of 1 blowing your nose (sorry, didn't realise..) 2 throw your bike rearwards when you stand on the pedals 3 (for the really difficult cases) ride on the edge of a deep pothole.
if the follower survives this he/she is qualified to take the lead now and again 😉
However, an acquaintance of mine and an Olympic cycling hopeful was killed trying to draft a dump truck, so be sure your leader knows he's being followed.
you want something solid at axleheight you can put your frontwheel against. To high or low a bumper, a rotating wheel or to much overhang on the truck increases the risks a lot. -- --- Marten Gerritsen
Adrian Boliston vaguely muttered something like ...
Quoted message said:
"Simonb" <[email hidden]> wrote in message news:[email hidden]...
Quoted message said:
Unless you're in a situation where it's expected -- don't draft riders you don't know.
It's very difficult to avoid the temptation to draft something like a moped if you hear one buzzing up on your tail
.... Yet very satisfying when they turn round a minute or so later to see you cycling merrily away, less than three inches from them, when they expected you to be a mile away .. 😉
-- Paul ... (8(|) Homer Rules !!! "A [censored] is a [censored], no matter what mode of transport they're using."
From that I assume you would do so. Why am I not surprised.
I would do what, break to make a drafter fall? Never. I don't mind being drafted. There's generally no extra risk for the person being drafted except maybe when the drafter has wheel overlap and the draftee brakes and turns sharply to that side. I do understand if anyone doesn't like to be drafted, though.
The "[censored]" bit was the executive summary of my feeling towards you for making jokes about causing bodily harm where a polite word ("Would you please keep a little distance, I don't like being being drafted, I'd rather ride alone"😉 would be appropriate and sufficient. Please prove me wrong by explaining that the nerdy disclaimer was honest and that you shouldn't have made the "joke" anyway. I am rather sensitive about any kind of disrespect (or even straightforward attacks that you like to make jokes about) for me a cycling road user. It's amazing how many near-misses one gets when doing more than cycling along leisurely.
From that I assume you would do so. Why am I not surprised.
I would do what, brake to make a drafter fall? Never. I don't mind being drafted. There's generally no extra risk for the person being drafted except maybe when the drafter has wheel overlap and the draftee brakes and turns sharply to that side. I do understand if anyone doesn't like to be drafted, though.
The "[censored]" bit was the executive summary of my feeling towards you for making jokes about causing bodily harm where a polite word ("Would you please keep a little distance, I don't like being being drafted, I'd rather ride alone"😉 would be appropriate and sufficient. Please prove me wrong by explaining that the nerdy disclaimer was honest and that you shouldn't have made the "joke" anyway. I am rather sensitive about any kind of disrespect (or even straightforward attacks that you like to make jokes about) for me a cycling road user. It's amazing how many near-misses one gets when doing more than cycling along leisurely.
From that I assume you would do so. Why am I not surprised.
Quoted message said:
I would do what, break to make a drafter fall? Never. I don't mind being drafted. There's generally no extra risk for the person being drafted except maybe when the drafter has wheel overlap and the draftee brakes and turns sharply to that side. I do understand if anyone doesn't like to be drafted, though.
I never liked anyone or anything in my wobble zone. Best keep out of others' wobble zones.