Hi,
I was stuck for a long time with the "standard" free mount involving
stepping on the pedal to bring the uni backwards under you, then doing
a back pedal with the other foot to get them off the "dead position"
before leaning forward and riding off. The explanation above shows
just how much is going on in the space of a fraction of a second.
In the book "Unicycling" by Andreas Anders-Wilkens & Robert Mager
http://tinyurl.com/ycqcxy
there is an alternative, which got me freemounting almost immediately,
although not yet 100% reliably.
As you are technically minded, as am I, the book explained the
mechanics.
Basically...
Stand with your first foot on the lower pedal (between 4 to 5 o'clock
as it suits [experience tells you here]).
Nestle the uni seat quite tightly. Prepare the other pedal - make it
approximately horizontal - to receive the other foot. Straighten uni
and align yourself up.
As you launch yourself onto the uni, and OVER the axle, add some force
on the seat to counteract the backwards movement of the uni. A balance
of forces will keep the uni and pedal in place enabling the other foot
to land on its pedal.
As the second foot lands on the pedal, it will already be out of the
dead zone. A brief pause as your body carries on over the axle to lean
forward, and you're away.
Hope this helps. I've almost got my 8 year old free mounting like
this.
Oh, another little aid is to have a little stone or stick behind the
wheel to stop it going backwards as well. As you improve, you will be
able to dispense with this, possibly instages by using progressively
smaller ones.
Good luck.
Jerry Attrick
--
JerryAttrick
"One wheel good: two wheels bad"
George OneWheel, "Unicycle Farm"
------------------------------------------------------------------------
JerryAttrick's Profile: http://www.unicyclist.com/profile/12670
View this thread: http://www.unicyclist.com/thread/56348