in message <[email hidden]>, DB4
(') said:Seeking opinions on Avid V-brakes (Single Digit-7) over the more commonly
available Shimano jobies my local bike shop promote! I'm upgrading the
cantilevers (at significant expense) on my trusty old Orange C-16. Can't
bring myself to part with it yet, largely because all the new bikes seem
fashionably expensive.
So folks - anyone able to vouch for the Avids? I'll be coupling them to
XT
levers. Or do the Shimano's win out with their XT brake.
I haven't tried the 7s. However, Avids were the brake of choice before the
widespread adoption of hydraulic disks, and you still see a lot of them in
womens' cross country racing. The 5s, which I have used and are similar
design in cheaper materials, are certainly very good. Yes, they will work
with Shimano levers PROVIDED the levers are designed for V brakes - cantis
(any make) use approximately the same cable pull as calipers (most makes)
but completely different from Vs (any make); and you can't use V brake
levers with cantis brakes and vice versa.
If you have canti levers, go for Avid Shorties.
The XT/XTR V brake is over complex. I've got XTR, too (same bike as now has
an Avid 5 on the front; it did have XTR on the front). They're vulnerable
to dirt and really not as good as simpler designs.
As Pete says, if you want really really good rim brakes Magura hydraulics
are the way to go, but they cost a fair bit more.
--
[email hidden] (Simon Brooke) http://www.jasmine.org.uk/~simon/
;; So, before proceeding with definitive screwing, choose the
;; position most congenital.
-- instructions for fitting bicycle handlebars