wheel wobble update

Penny S. said:

I went to go visit the lbs guys to get a new chain. B. put the Svelte Hawaiian up on the
workstand,

This looked like it was starting to get good until I realied your LBS guy wasn't a Hawaiian.

Quoted message said:

build the whole new wheel is about$150 with the super special spokes it has.

Yeah, it sux. I ended up buying a whole new wheelset because of this, and I really didn't hit the
wheel all that hard.

--
-BB- To reply to me, drop the attitude (from my e-mail address, at least)

Penny S. said:

Cost? Ouch. Mavic crossride rim with Mavic hub. Hubs in good shape but to build the whole new
wheel is about$150 with the super special spokes it has. Ah, that's what I get for buying a "nice"
bike. I guess I'll ride it until it gets really bad.

Don't do it until you get the package I send you!!!!!

Penny S. said:

( and a trip to lbs)

I trued it to the best of my ability but couldn't get it "perfect" but as a newbie wheel truer I
wasn't too worried about at least their wasn't a thump on using my rear brake any more.

I went to go visit the lbs guys to get a new chain. B. put the Svelte Hawaiian up on the
workstand, double checked the chain ( you have a few months, might as well wait) and since it was
dead on a Saturday afternoon he started poking around. I asked him about the wheel... he messed
around with it a bit then two of them started working on it as they couldn't get it true. Finally
Guy the wheel builder took it down to the basement to put on the wheel stand and is gone for 20
minutes. Verdict: Penny must have hit some thing, there's a flat spot in the rim that's not
truable. Recommendation: new wheel, but for now ride it until it gets really bad. Cost? Ouch.
Mavic crossride rim with Mavic hub. Hubs in good shape but to build the whole new wheel is
about$150 with the super special spokes it has. Ah, that's what I get for buying a "nice" bike. I
guess I'll ride it until it gets really bad.

Penny

no, that's what happens when you buy a bike with the latest 'fad' in wheels on it. *Most* mavic rims
have a flat spot in them! it can be worked out if you know how. also just how 'flat' is this flat
spot? a mm or 2 makes NO difference at all on a fat tire bike ( especialy true for disk brakes), the
tires are likely to be that far out of round.

James Connell said:

Quoted message said:

Cost? Ouch. Mavic crossride rim with Mavic hub. Hubs in good shape but to build the whole new
wheel is about$150 with the super special spokes it has. Ah, that's what I get for buying a
"nice" bike. I guess I'll ride it until it gets really bad.

Penny

no, that's what happens when you buy a bike with the latest 'fad' in wheels on it. *Most* mavic
rims have a flat spot in them! it can be worked out if you know how. also just how 'flat' is this
flat spot? a mm or 2 makes NO difference at all on a fat tire bike ( especialy true for disk
brakes), the tires are likely to be that far out of round.

fad eh? For all the nasty things that have been said about my bike, that's new to me. NOT being a
bike techie and buying it used, what do I know?

penny

Penny S. said:

James Connell said:

Quoted message said:

Cost? Ouch. Mavic crossride rim with Mavic hub. Hubs in good shape but to build the whole new
wheel is about$150 with the super special spokes it has. Ah, that's what I get for buying a
"nice" bike. I guess I'll ride it until it gets really bad.

Penny

no, that's what happens when you buy a bike with the latest 'fad' in wheels on it. *Most* mavic
rims have a flat spot in them! it can be worked out if you know how. also just how 'flat' is this
flat spot? a mm or 2 makes NO difference at all on a fat tire bike ( especialy true for disk
brakes), the tires are likely to be that far out of round.

fad eh? For all the nasty things that have been said about my bike, that's new to me. NOT being a
bike techie and buying it used, what do I know?

penny

i'm not trying to diss your bike. i don't even know what bike you have.

mavic has,in recent years, produced some real turkeys in complete wheels. their QC comes and goes as
well. it is very common for their OEM wheels to have flat spots. Most of the rims they produce (and
most rims anybody produces) are flat(or the opposite) in a spot. it can be fixed - i'm not going
into how here, it would offend those who don't like big plastic mallets! as long as the brake pads
hit the rim on the braking surface and miss the tire, it will be fine. even if it's really bad ( >
2mm ) a change to a style of pad that has a thinner profile will still keep you riding it. a flat
spot doesn't affect the integrity of the wheel very much at all.

"James Connell" <[email hidden]> wrote in message "]news:[email hidden]...
| Penny S. wrote:
| > ( and a trip to lbs)
| >
| > I trued it to the best of my ability but couldn't get it "perfect" but
as a
| > newbie wheel truer I wasn't too worried about at least their wasn't a
thump
| > on using my rear brake any more.
| >
| > I went to go visit the lbs guys to get a new chain. B. put the Svelte Hawaiian up on the
| > workstand, double checked the chain ( you have a few months, might as well wait) and since it
| > was dead on a Saturday
afternoon he
| > started poking around. I asked him about the wheel... he messed around with it a bit then two of
| > them started working on it as they couldn't
get it
| > true. Finally Guy the wheel builder took it down to the basement to put
on
| > the wheel stand and is gone for 20 minutes. Verdict: Penny must have hit some thing, there's a
| > flat spot in the rim that's not truable. Recommendation: new wheel, but for now ride it until
it
| > gets really bad. Cost? Ouch. Mavic crossride rim with Mavic hub. Hubs in good shape but
to
| > build the whole new wheel is about$150 with the super special spokes it
has.
| > Ah, that's what I get for buying a "nice" bike. I guess I'll ride it
until
| > it gets really bad.
| >
| > Penny
| >
| >
| >
|
| no, that's what happens when you buy a bike with the latest 'fad' in wheels on it. *Most* mavic
| rims have a flat spot in them! it can be worked out if you know how. also just how 'flat' is this
| flat spot? a mm or 2 makes NO difference at all on a fat tire bike ( especialy true for disk
| brakes), the tires are likely to be that far out of round.

Um, this has got me scratching my head a bit here. In the last couple years I've sold about 50 sets
of Mavic wheels and NONE of them arrived from the factory with flat spots. Maybe we just got lucky,
but the lion's share of them were the lower price point units. The ONLY quality control issue I had
was a UST set with several cross-threaded nipple sockets, which they cheerfully replaced.

Maybe I've got a "Princess and the Pea" posterior, but I sure could feel 2mm of flat spot (or maybe
it's because I run fairly high PSI)

---
__o _`\(,_ Cycling is life, (_)/ (_) all the rest, just details. Nelson Binch =^o.o^=
intergalax.comintergalax.comOpen ↗

Checked by AVG anti-virus system (grisoft.comgrisoft.comOpen ↗). Version: 6.0.471 / Virus Database: 269 -
Release Date: 4/10/2003

"Penny S." <[email hidden]> wrote in message "]news:[email hidden]...
| James Connell wrote:
| >> Cost? Ouch. Mavic crossride rim with Mavic hub. Hubs in good shape but to build the whole new
| >> wheel is about$150 with the super special spokes it has. Ah, that's what I get for buying a
| >> "nice" bike. I guess I'll ride it until it gets really bad.
| >>
| >> Penny
| >>
| >>
| >>
| >
| > no, that's what happens when you buy a bike with the latest 'fad' in wheels on it. *Most* mavic
| > rims have a flat spot in them! it can be worked out if you know how. also just how 'flat' is
| > this flat spot? a mm or 2 makes NO difference at all on a fat tire bike ( especialy true for
| > disk brakes), the tires are likely to be that far out of round.
|
| fad eh? For all the nasty things that have been said about my bike, that's new to me. NOT being a
| bike techie and buying it used, what do I know?

For a fad, the availability of high quality factory wheels cut my wheelbuilding almost 90%. Once we
started selling those, the only wheels I built on a regular basis were for Clydesdale riders.

---
__o _`\(,_ Cycling is life, (_)/ (_) all the rest, just details. Nelson Binch =^o.o^=
intergalax.comintergalax.comOpen ↗

Checked by AVG anti-virus system (grisoft.comgrisoft.comOpen ↗). Version: 6.0.471 / Virus Database: 269 -
Release Date: 4/10/2003

James Connell said:

Penny S. said:

James Connell said:

> Cost? Ouch. Mavic crossride rim with Mavic hub. Hubs in good shape but to build the whole new
> wheel is about$150 with the super special spokes it has. Ah, that's what I get for buying a
> "nice" bike. I guess I'll ride it until it gets really bad.
>
> Penny
>
>
>

no, that's what happens when you buy a bike with the latest 'fad' in wheels on it. *Most* mavic
rims have a flat spot in them! it can be worked out if you know how. also just how 'flat' is
this flat spot? a mm or 2 makes NO difference at all on a fat tire bike ( especialy true for
disk brakes), the tires are likely to be that far out of round.

fad eh? For all the nasty things that have been said about my bike, that's new to me. NOT being a
bike techie and buying it used, what do I know?

penny

i'm not trying to diss your bike. i don't even know what bike you have.

oh, sure. Between you and JD... good thing I"m not crying yet. But I'm close.

Quoted message said:

mavic has,in recent years, produced some real turkeys in complete wheels. their QC comes and goes
as well. it is very common for their OEM wheels to have flat spots. Most of the rims they produce
(and most rims anybody produces) are flat(or the opposite) in a spot. it can be fixed - i'm not
going into how here, it would offend those who don't like big plastic mallets!

lay it on us....

penny

ClydesdaleMTB said:

Penny S. said:

Cost? Ouch. Mavic crossride rim with Mavic hub. Hubs in good shape but to build the whole new
wheel is about$150 with the super special spokes it has. Ah, that's what I get for buying a
"nice" bike. I guess I'll ride it until it gets really bad.

Don't do it until you get the package I send you!!!!!

what, don't ride my wheel?

.^ )

penny