vintage road bikes

Quoted message said:

Howdy,

I'm looking for a vintage road bike for commuting. I'd spend

$200-300.

Quoted message said:

What are the better deals? I'm not looking for a flashy one,
but I don't want a beater, either. What I do have in mind is that
it should allow me to ride in a more relaxed position (i.e., not
a race bike); it also should not be so obsolete that parts
availability becomes a problem.

Thanks for reading.

-Brian

try a pawn shop. you should be able to get a stolen $2000 bike for your
price.

Hello,
You should be able to buy an older chrome moly frame for between
$100-200, and maybe an aluminum frame for around $300. I just sold a 1990
Trek 330 for $100.00. Check at flea markets, yard sales, auctions, etc.

Hope this helps,
Larry

<[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

Howdy,

I'm looking for a vintage road bike for commuting. I'd spend $200-300.
What are the better deals? I'm not looking for a flashy one,
but I don't want a beater, either. What I do have in mind is that
it should allow me to ride in a more relaxed position (i.e., not
a race bike); it also should not be so obsolete that parts
availability becomes a problem.

Thanks for reading.

-Brian

uni75ca said:

Howdy,

I'm looking for a vintage road bike for commuting. I'd spend $200-300.
What are the better deals? I'm not looking for a flashy one,
but I don't want a beater, either. What I do have in mind is that
it should allow me to ride in a more relaxed position (i.e., not
a race bike); it also should not be so obsolete that parts
availability becomes a problem.

What do you mean by "vintage"? Anything old enough to wear that label
will have "obsolete" parts, like 126mm rear axles, 6-7-speed freewheels or
early cassettes, and single-pivot brakes. Such things will present parts
replacement problems.

On the other hand, with a little work you can use an old frame with any
mix of new and old parts, so parts availability is not the biggest issue
around. Good old road bikes can be had for everything from $0 in a
dumpster (if you are really lucky) to $1000+ for collectors' versions.
For the best bargains, avoid Peugeot (too desirable by collectors in
comparison to its quality, IMO) and most Italian brands. I think mid-80s
Japanese will be your best bargain. After that come obscure brands from
any country, then early US marks like Trek or Klein.

Steel has the best adaptability, since you can spread the rear dropouts to
accept a modern wheel. Aluminum is cheapest, and may be fine depending on
prior use and quality of original frame.

You don't want an old Schwinn tank for this use (if you have a boat, a
Schwinn from the 70s would come in handy as an anchor), or junk like
Murray or Huffy.

--

David L. Johnson

__o | It is a scientifically proven fact that a mid life crisis can
_`\(,_ | only be cured by something racy and Italian. Bianchis and
(_)/ (_) | Colnagos are a lot cheaper than Maserattis and Ferraris. --
Glenn Davies

Thank you, Mr. Johnson. Actually I am interested in a Trek.

-Brian

David L. Johnson said:

uni75ca said:

Howdy,

I'm looking for a vintage road bike for commuting. I'd spend

$200-300.

Quoted message said:

Quoted message said:

What are the better deals? I'm not looking for a flashy one,
but I don't want a beater, either. What I do have in mind is that
it should allow me to ride in a more relaxed position (i.e., not
a race bike); it also should not be so obsolete that parts
availability becomes a problem.

What do you mean by "vintage"? Anything old enough to wear that

label

Quoted message said:

will have "obsolete" parts, like 126mm rear axles, 6-7-speed

freewheels or

Quoted message said:

early cassettes, and single-pivot brakes. Such things will present

parts

Quoted message said:

replacement problems.

On the other hand, with a little work you can use an old frame with

any

Quoted message said:

mix of new and old parts, so parts availability is not the biggest

issue

Quoted message said:

around. Good old road bikes can be had for everything from $0 in a
dumpster (if you are really lucky) to $1000+ for collectors'

versions.

Quoted message said:

For the best bargains, avoid Peugeot (too desirable by collectors in
comparison to its quality, IMO) and most Italian brands. I think

mid-80s

Quoted message said:

Japanese will be your best bargain. After that come obscure brands

from

Quoted message said:

any country, then early US marks like Trek or Klein.

Steel has the best adaptability, since you can spread the rear

dropouts to

Quoted message said:

accept a modern wheel. Aluminum is cheapest, and may be fine

depending on

Quoted message said:

prior use and quality of original frame.

You don't want an old Schwinn tank for this use (if you have a boat,

a

Quoted message said:

Schwinn from the 70s would come in handy as an anchor), or junk like
Murray or Huffy.

--

David L. Johnson

__o | It is a scientifically proven fact that a mid life crisis

can

Quoted message said:

_`\(,_ | only be cured by something racy and Italian. Bianchis and
(_)/ (_) | Colnagos are a lot cheaper than Maserattis and Ferraris.

--

Quoted message said:

Glenn Davies

Hello,

What were Trek's old naming schemes? Kind of confusing.

-Brian

Quoted message said:

Hello,

What were Trek's old naming schemes? Kind of confusing.

Most old Treks have no names, only model numbers. For your purposes
I'd be looking for old 520s, Trek's steel touring bike. My girlfriend
paid $325(US) for hers about four years ago.

jeverett3<AT>earthlink<DOT>net http://home.earthlink.net/~jeverett3

Quoted message said:

Howdy,

I'm looking for a vintage road bike for commuting. I'd spend

$200-300.

Quoted message said:

What are the better deals? I'm not looking for a flashy one,
but I don't want a beater, either. What I do have in mind is that
it should allow me to ride in a more relaxed position (i.e., not
a race bike); it also should not be so obsolete that parts
availability becomes a problem.

Vintage and obsolete (in some sense) go hand in hand. The best deals
are found at garage sales - you can find nice mid-80's japanese road
bikes for $20 and less. Adding $180-280 in upgrades/improvements is
more than generous if you do all the work yourself, and the resulting
bike will be set up exactly as you want it.

For example, this is a project I am currenty working on for my wife -
none of the details are final. All prices are approximate - mostly
rounded up, to give a worst case total price.

Bike: mid 80's Fuji Sagres, bought at garage sale for $2

Brake upgrades:

$15 new levers
$15 new cables and cable housing
$15 new handlebar tape (nice cork)
$20 new brake pads

Drivetrain upgrades/fixes:

$20 new 7sp freewheel - existing freewheel is rather rusted
$15 new 7sp indexed shifters
$25 new large chainring - existing one is badly corroded
$15 new chain - existing one is badly rusted

Other:
$25 new saddle
$40 new stem - to fit this bike, my wife needs more height and
extension
$40 new tires - existing ones have damaged sidewalls.

Total cost: $247. A bit much, but the stem is a killer, as is the the
amount of drivetrain stuff. Actual upgrade price should be less, do to
getting better prices than shown above on some items. The resulting
bike will be very nice, and should fit my wife perfectly. I will
probably look for a few more garage sale bikes, to more cheaply supply
some of the above parts.

Later,
Mark

[email hidden] wrote in
news:[email hidden]:

Quoted message said:

Thank you, Mr. Johnson. Actually I am interested in a Trek.

Hey are you in luck, you can buy a NEW Treck cuz even the new ones are
vintage.
O O ! ) (I am not real good at smilies)

Quoted message said:

Quoted message said:

Howdy,

I'm looking for a vintage road bike for commuting. I'd spend

$200-300.

Quoted message said:

What are the better deals? I'm not looking for a flashy one,
but I don't want a beater, either. What I do have in mind is that
it should allow me to ride in a more relaxed position (i.e., not
a race bike); it also should not be so obsolete that parts
availability becomes a problem.

Vintage and obsolete (in some sense) go hand in hand. The best deals
are found at garage sales - you can find nice mid-80's japanese road
bikes for $20 and less. Adding $180-280 in upgrades/improvements is
more than generous if you do all the work yourself, and the resulting
bike will be set up exactly as you want it.

For example, this is a project I am currenty working on for my wife -
none of the details are final. All prices are approximate - mostly
rounded up, to give a worst case total price.

Bike: mid 80's Fuji Sagres, bought at garage sale for $2

Brake upgrades:

$15 new levers
$15 new cables and cable housing
$15 new handlebar tape (nice cork)
$20 new brake pads

Drivetrain upgrades/fixes:

$20 new 7sp freewheel - existing freewheel is rather rusted
$15 new 7sp indexed shifters
$25 new large chainring - existing one is badly corroded
$15 new chain - existing one is badly rusted

Other:
$25 new saddle
$40 new stem - to fit this bike, my wife needs more height and
extension
$40 new tires - existing ones have damaged sidewalls.

Total cost: $247. A bit much, but the stem is a killer, as is the the
amount of drivetrain stuff. Actual upgrade price should be less, do to
getting better prices than shown above on some items. The resulting
bike will be very nice, and should fit my wife perfectly. I will
probably look for a few more garage sale bikes, to more cheaply supply
some of the above parts.

My experience with bikes of that vintage is that the wheels are nothing
I'd want to put any serious mileage on. It's real easy to get up to the
price of a new bike.

<[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

Thank you, Mr. Johnson. Actually I am interested in a Trek.

If I were you, I would look for an older Trek 520. Touring bikes make
excellent commuters---rack and fender eyelets, relaxed geometry, and room
for fat tires to deal with potholes and road debris. eBay can be an option,
if you're willing to play the waiting game, and if you need a common size.

If by vintage you mean more of the "retro-look" than actually having an old
bike...

I saw some wicked stylish cruiser bikes today. They weren't expensive - most
in your price range.

I figured they must be murder to ride but the shop techs said they'd tried
them and they were very comfortable.

http://www.khsbicycles.com/09_flyer_6.htm
http://www.norco.com/05/2005bikes/specialty.php

(they had other models that were even more retro than these but I can't find
links)

Chris

<[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

Howdy,

I'm looking for a vintage road bike for commuting. I'd spend $200-300.
What are the better deals? I'm not looking for a flashy one,
but I don't want a beater, either. What I do have in mind is that
it should allow me to ride in a more relaxed position (i.e., not
a race bike); it also should not be so obsolete that parts
availability becomes a problem.

Thanks for reading.

-Brian

No no no. I would not want to be seen on such things.

-Brian

C.J.Patten said:

If by vintage you mean more of the "retro-look" than actually having an old
bike...

I saw some wicked stylish cruiser bikes today. They weren't expensive - most
in your price range.

I figured they must be murder to ride but the shop techs said they'd tried
them and they were very comfortable.

http://www.khsbicycles.com/09_flyer_6.htm
http://www.norco.com/05/2005bikes/specialty.php

(they had other models that were even more retro than these but I can't find
links)

Chris

<[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

Howdy,

I'm looking for a vintage road bike for commuting. I'd spend $200-300.
What are the better deals? I'm not looking for a flashy one,
but I don't want a beater, either. What I do have in mind is that
it should allow me to ride in a more relaxed position (i.e., not
a race bike); it also should not be so obsolete that parts
availability becomes a problem.

Thanks for reading.

-Brian