I just got a Velocity Deep-V rim from a guy on eBay (new in the plastic) and it seems that on one of
the nipple holes drilled in the rim (the big ones that you would cover with rim tape), the aluminum
that was originally there didn't come off all the way. The metal piece that used to be where the
hole was hadn't come all the way off, and it's still connected to the rim at one spot. Also, it
seems that whatever they used to drill the smaller spoke holes (the inner ones) also took off some
material from the inside of the rim. \ / \ / \../ \/ Forgive the poor art, but if that's a
cross-section of the rim, it appears that the drill bit hit the rim in those two places, taking off
a little bit of aluminum. Is there any reason to worry about this? I've heard nothing but praise
about these rims. Thanks! Matt
Cycling Equipment · Public discussion
Velocity Quality Control?
This thread is locked and is currently read-only.
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 5 December 2003
- Last activity
- 5 December 2003
- Original author
- Matt J
- Posts
- 2
- Discussion status
- Public discussion
- Total views
- 803
- Views / 30 days
- 1
- Topics
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
Not only is the QC usually great, but the warranty is excellent. They want to hear good and bad
news, like any responsible seller. Tom--
Bruni Bicycles "Where art meets science" brunibicycles.com
410.426.3420 Matt J <[email hidden]> wrote in message
"]news:[email hidden]...Quoted message said:
I just got a Velocity Deep-V rim from a guy on eBay (new in the plastic) and it seems that on one
of the nipple holes drilled in the rim (the big ones that you would cover with rim tape), the
aluminum that was originally there didn't come off all the way. The metal piece that used to be
where the hole was hadn't come all the way off, and it's still connected to the rim at one spot.
Also, it seems that whatever they used to drill the smaller spoke holes (the inner ones) also took
off some material from the inside of the rim. \ / \ / \../ \/ Forgive the poor art, but if that's
a cross-section of the rim, it appears that the drill bit hit the rim in those two places, taking
off a little bit of aluminum. Is there any reason to worry about this? I've heard nothing but
praise about these rims. Thanks! Matt
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.