Is it OK to use a 32mm tube in a 25mm tyre? It cannot be very neat
inside there.
This is for an old 27" wheel, and I'd like to keep using schrader
valves (for perverse reasons best not argued here.) Tubes smaller
than 1¼" are hard to find. I know a 700C is close enough.
Australia and New Zealand · Public discussion
Using an over-sized inner tube.
Thread navigation
Jump through the discussion
Go to the original post, the replies on this page, or the latest preserved contribution.
Thread details
What we know about this thread
- Original section
- Australia and New Zealand
- Published
- 25 May 2004
- Last activity
- 27 May 2004
- Original author
- Mike
- Posts
- 6
- Discussion status
- Public discussion
- Total views
- 785
- Views / 30 days
- 0
- Topics
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
"Mike" in
Quoted message said:
Is it OK to use a 32mm tube in a 25mm tyre? It cannot be very neat
inside there.If you wind up with a fold your tube will have a very short life. But then,
tubes are undersize to start with, so get one and try it. If it looks like
it will have a foldover in it, give it up.Theo
-
"Theo Bekkers" <[email hidden]> wrote in message news:<[email hidden]>...
Quoted message said:
"Mike" in
Quoted message said:
Is it OK to use a 32mm tube in a 25mm tyre? It cannot be very neat
inside there.If you wind up with a fold your tube will have a very short life. But then,
tubes are undersize to start with, so get one and try it. If it looks like
it will have a foldover in it, give it up.Theo
32mm in a 25? It may work... in throes of desperation I tried a 35 in
23 - forget it, it doesn't fit. I had to make (another) trip to the
shop...Ritch
-
Ritch said:
"Theo Bekkers" <[email hidden]> wrote in message news:<[email hidden]>...
Quoted message said:
Quoted message said:
If you wind up with a fold your tube will have a very short life.
Bummer. Thats what I was afraid of.
Quoted message said:
32mm in a 25? It may work... in throes of desperation I tried a 35 in
23 - forget it, it doesn't fit. I had to make (another) trip to theIts hard to get the tyre on at all. Very hard over the big tube without
pinching a hole in it. Tyre levers essential, if only to shove all
those rubber folds out of the way :-)Anyway, my order from the US finally arrived, including nice
Japanese kevlar-belted 27" touring tyres. Am happy. -
"Mike" <[email hidden]> wrote in message
news:[email hidden][...]
Quoted message said:
Anyway, my order from the US finally arrived, including nice
Japanese kevlar-belted 27" touring tyres. Am happy.Pasela Tourguards? They have an excellent reputation. I very nearly
imported some myself but in the end went for slicks. My Fasgrips arrived
from America today, so I'm happy too.--
A: Top-posters.
Q: What is the most annoying thing on Usenet? -
DRS said:
Quoted message said:
Anyway, my order from the US finally arrived, including nice
Japanese kevlar-belted 27" touring tyres. Am happy.Pasela Tourguards? They have an excellent reputation. I very nearly
imported some myself but in the end went for slicks.Yes, thats the one. They have the usual fine tread, which I think is
purely cosmetic. Completely useless, but doesn't do any harm either?
Except maybe provides some thinner spots for the thorns to get through?
I hope the aramid (kevlar) does its job.
Only US$17 from aebike.com .
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.