I'm changing my 52-42-30 Ultegra to a 50-40-28 TA Alize chainring setup.
How much, if any, chain should I plan on removing to go from 52 to 50 teeth on the big ring? I'm thinking that two teeth less means I should remove one link. Does that make sense?
Will I need to remove the crank arm to change out the inner chainring?
"Gary Mishler" <[email hidden]> wrote in message news:gGcya.907755$F1.112431@sccrnsc04...
Quoted message said:
I'm changing my 52-42-30 Ultegra to a 50-40-28 TA Alize chainring setup.
How much, if any, chain should I plan on removing to go from 52 to 50
teeth
Quoted message said:
on the big ring? I'm thinking that two teeth less means I should remove
one
Quoted message said:
link. Does that make sense?
Will I need to remove the crank arm to change out the inner chainring?
Thanks, Mish
I just changed my chainrings from 52/42/30 to 48/38/30. The tech at the LBS that reset the shifter said I didn't need to remove any links. And yes, I think you will have to remove the crankarm to change the small ring. Mike
I'm changing my 52-42-30 Ultegra to a 50-40-28 TA Alize chainring setup.
How much, if any, chain should I plan on removing to go from 52 to 50 teeth on the big ring? I'm thinking that two teeth less means I should remove one link. Does that make sense?
Will I need to remove the crank arm to change out the inner chainring?
Don't take any links out. Put go to the small/small combination and if the front derailleur bottom clears the chain, leave the chain length alone.
I'm changing my 52-42-30 Ultegra to a 50-40-28 TA Alize chainring setup=
=2E
Quoted message said:
=20 How much, if any, chain should I plan on removing to go from 52 to 50 t=
eeth
Quoted message said:
on the big ring? I'm thinking that two teeth less means I should remov=
e one
Quoted message said:
link. Does that make sense?
It would if the chain wrapped all the way 'round the chainring. Since=20 it only wraps half way 'round, the theoretical optimal length would be=20 1/2 link (1/2 inch) shorter. Probably not reason to change it at all.
Quoted message said:
Will I need to remove the crank arm to change out the inner chainring?
gary-<< How much, if any, chain should I plan on removing to go from 52 to 50 teeth on the big ring? I'm thinking that two teeth less means I should remove one link. Does that make sense?
Put the new crank on and see if you have pulley, cog interference in the big cog, small ring. If you do, take one link out but not enough to not have enough for big/big combos.
<< Will I need to remove the crank arm to change out the inner chainring?
Yep-
Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302 (303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali costruite eccezionalmente bene"