trike hubs

BoiledBeef said:

anyone know where i can get some disk compatible wheel hubs in the UK, for
homebuilt trike, its my first project, i have BMX wheels on the front at the
moment, really strong, with 14mm axle, but i need disks on, i cant stop the
damn thing...

Consider drum brakes too: they're good enough for Windcheetahs, after
all, and cheaper than serious discs. Sturmey and SRAM both make them,
and both should be fine on a trike.

Pete.
--
Peter Clinch Medical Physics IT Officer
Tel 44 1382 660111 ext. 33637 Univ. of Dundee, Ninewells Hospital
Fax 44 1382 640177 Dundee DD1 9SY Scotland UK
net [email hidden] http://www.dundee.ac.uk/~pjclinch/

thanx for the advice,

what about the wheel axles?
wont they bent if they are only supported on one side?

before i used the BMX wheels with oversize axles,
i used "normal" wheels, and bent the axles...
i like the look of the SRAM i brake,

On Fri, 7 Jan 2005 17:26:46 -0000

BoiledBeef said:

thanx for the advice,

what about the wheel axles?
wont they bent if they are only supported on one side?

before i used the BMX wheels with oversize axles,
i used "normal" wheels, and bent the axles...
i like the look of the SRAM i brake,

I recently purchased a set of "boxer" hubs with the intention of
building a tadpole some time this summer. They're designed for a 22mm hub,
and for disc brakes. They only have 3 lugs for the rotors, but in the same
spacing as 6 bolt pattern rotors. I guess we'll see if i've made a horrible
mistake.

But now I'm thinking 22mm is really way too thick. I'm gonna have
multi-pound axles at that point, unless i find, say, a hollow, cro-mo bolt,
or shim it with bronze bushings and use a BMX size or something.

fwiw, these are Hayes hubs i bought from icyclesusa.com, fairly cheaply.
They have 3 bolt pattern disc brakes to match, but the disc brakes are
department store grade.

On Fri, 7 Jan 2005 10:42:33 -0700

Eric Jorgensen said:

fwiw, these are Hayes hubs i bought from icyclesusa.com, fairly
cheaply.
They have 3 bolt pattern disc brakes to match, but the disc brakes are
department store grade.

Make that White Industries, not Hayes. sheesh, where the heck is my
brain.

This is probably a better idea, to tell the truth:

http://www.chucksbikes.com/store/hufor.htm

tandem hub w/ 6 bolt pattern for the rotor, 20mm axle, available in 32,
36, or 48 hole.

thanx Eric

pretty cheap too...

thanx Eric

pretty cheap too...

On Fri, 7 Jan 2005 18:19:18 -0000

BoiledBeef said:

thanx Eric

pretty cheap too...

They also sell an entry level USS SWB for $450 complete, though you'll
pay like $80 for freight. Very nearly the same bike as the Actionbent
Jetstream 1, made by the same factory in taiwan.

BoiledBeef said:

Hi,
anyone know where i can get some disk compatible wheel hubs in the UK, for
homebuilt trike, its my first project, i have BMX wheels on the front at the
moment, really strong, with 14mm axle, but i need disks on, i cant stop the
damn thing...

If you asked Phil Wood, they would likely make some of these for you:
<http://www.ihpva.org/incoming/2002/Dragonflyer/df11.jpg>,
<http://www.ihpva.org/incoming/2002/Dragonflyer/df12.jpg>,
<http://www.ihpva.org/incoming/2002/Dragonflyer/df13.jpg>.

Expect to pay somewhere in the range of 300-350 GBP for a set. 🙁

--
Tom Sherman - Near Rock Island

I'd look into hubs for Cannondale's "Lefty" one-sided fork hubs if you want
light weight disk hubs.

"BoiledBeef" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

Hi,
anyone know where i can get some disk compatible wheel hubs in the UK, for
homebuilt trike, its my first project, i have BMX wheels on the front at
the
moment, really strong, with 14mm axle, but i need disks on, i cant stop
the
damn thing...
thanx

BoiledBeef, Manchester UK

BoiledBeef said:

Hi,
anyone know where i can get some disk compatible wheel hubs in the UK, for
homebuilt trike, its my first project, i have BMX wheels on the front at the
moment, really strong, with 14mm axle, but i need disks on, i cant stop the
damn thing...
thanx

BoiledBeef, Manchester UK

Try http://www.hpv-shop.co.uk

Mark

Peter Clinch said:

BoiledBeef said:

anyone know where i can get some disk compatible wheel hubs in the UK,
for
homebuilt trike, its my first project, i have BMX wheels on the front
at the
moment, really strong, with 14mm axle, but i need disks on, i cant
stop the
damn thing...

Consider drum brakes too: they're good enough for Windcheetahs, after
all, and cheaper than serious discs. Sturmey and SRAM both make them,
and both should be fine on a trike.

Pete.

We use sturmey hubs for the front of our pedalcars. They use 12mm axles
supported from one side and are completely bomb proof. You can even get
a quick release axle for them.

http://www.pedalcar-shop.co.uk/scripts/prodView.asp?idproduct=229

Neil