track nuts

Might be. I had a rear Record derailleur ten years ago that
seemed like an inch size diameter but a metric thread pitch.

"g.hopkins" <[email hidden]> wrote in message
news:Coh6c.17$ef5.4@newsfe1-win...

Quoted message said:

anybody know if campag record (old)track nuts are a
unusual size thread as

I

Quoted message said:

cant find any that will fit. campag want a small fortune
for genuine ?

g.hopkins said:

anybody know if campag record (old)track nuts are a
unusual size thread as I cant find any that will fit.
campag want a small fortune for genuine ?

Campag use hybrid Imperial/metric threads - 10mm x 26 tpi at
the rear, and 9mm x 26 tpi at the front. Genuine Campag
track nuts are horribly expensive. Alternatives exist, but I
don't know a UK source.

James Thomson

hopkins-<< anybody know if campag record (old)track nuts are
a unusual size thread as I cant find any that will fit.
campag want a small fortune for genuine ?

Quoted message said:

Quoted message said:

<BR><BR>

10 by 26..I have aftermarket ones for $16 per pair. genuine
Campagnolo ones are $25 per nut.

Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St.
Boulder, CO, 80302
(303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali
costruite eccezionalmente bene"

You might want to check with Sheldon Brown at Harris
Cyclery.

Here is a link to their track nuts:-
sheldonbrown.comfixed.htmlOpen ↗

--
Lewis.

.........................

*******************************

"g.hopkins" <[email hidden]> wrote in message
news:Coh6c.17$ef5.4@newsfe1-win...

Quoted message said:

anybody know if campag record (old)track nuts are a
unusual size thread as

I

Quoted message said:

cant find any that will fit. campag want a small fortune
for genuine ?

"Quaerenda pecunia primum est; virtus post nummos." - Horace

g.hopkins said:

anybody know if campag record (old)track nuts are a unusual
size thread as I cant find any that will fit. campag want a
small fortune for genuine ?

The threading standard used across all generations of
Campagnolo track hub axles has been 9x26 in the front, 10x26
in the rear. OEM spares are rather costly, but there are
competent aftermarket alternatives.

The track section of our website includes a page of small
service parts and tools. Take the scenic route from the
welcoming page (URL in the signature lines below) or go
directly to businesscycles.comtrpart.htmOpen ↗
for a listing of options.
-------------------------------
John Dacey Business Cycles, Miami, Florida Since 1983 Our
catalogue of track equipment: online since 1996.
businesscycles.combusinesscycles.comOpen ↗

g.hopkins said:

anybody know if campag record (old)track nuts are a
unusual size thread as I cant find any that will fit.
campag want a small fortune for genuine ?

The rest of the world is out of step with Campagnolo's
standard 10f26 thread. It's 55 degree Whitworth, not m10x1
60 degrees ISO metric.

Going at that the other way, if it helps, pretty much any
standard 9x1/4" balls rear axle set will for your Record
hub. (Suzue, Normandy, etc)

--
Andrew Muzi www.yellowjersey.org Open every day since 1
April, 1971