Road Cycling · Public discussion

Tool gripe/ Murphy's corollary?

Started by Patrick Lamb · · Last activity · 9 posts · 397 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Road Cycling
Published
10 September 2006
Last activity
12 September 2006
Original author
Patrick Lamb
Posts
9
Discussion status
Public discussion
Total views
397
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–9 of 9
Posts remain in their original chronological order.

Text size
  1. Ob bike: I was working on my bike today.

    I have a three-way Allen/Bondhus wrench like the one shown at
    http://tinyurl.com/zaxoj8 and it's a wonderful wrench set. Performs
    well (if a tool can do such a thing), I'd buy another just like it,
    blah, blah, blah.

    What I want to know is why the 5 mm wrench disappears so readily?
    Seems like every time I put it down, the 5 mm end falls into a black
    hole, and I have to stop what I'm doing, carefully focus on the
    blessed thing, and read each size before I can identify the 5 mm that
    I usually want. I can usually tell the 4 from the 5 by sight, but the
    6 also looks like the 5. By sheer chance, you'd thing 1/3 of the time
    without looking I'd get the 5. A glance to eliminate the 4, and the
    statistician would say I'd get the 5 one out of every two times. I
    think I hit zero out of 25-30 times this afternoon.

    Is this a known property of black tools, or is Murphy's Law hard at
    work?

    Pat

    Email address works as is.

  2. Why not simply put a bit of red nail polish (or equivalent) on a
    conspicuous place on the 5mm tool if it's used more often than others?

    Patrick Lamb said:

    Ob bike: I was working on my bike today.

    I have a three-way Allen/Bondhus wrench like the one shown at
    http://tinyurl.com/zaxoj8 and it's a wonderful wrench set. Performs
    well (if a tool can do such a thing), I'd buy another just like it,
    blah, blah, blah.

    What I want to know is why the 5 mm wrench disappears so readily?
    Seems like every time I put it down, the 5 mm end falls into a black
    hole, and I have to stop what I'm doing, carefully focus on the
    blessed thing, and read each size before I can identify the 5 mm that
    I usually want. I can usually tell the 4 from the 5 by sight, but the
    6 also looks like the 5. By sheer chance, you'd thing 1/3 of the time
    without looking I'd get the 5. A glance to eliminate the 4, and the
    statistician would say I'd get the 5 one out of every two times. I
    think I hit zero out of 25-30 times this afternoon.

    Is this a known property of black tools, or is Murphy's Law hard at
    work?

    Pat

    Email address works as is.

  3. richard said:

    Why not simply put a bit of red nail polish (or equivalent) on a
    conspicuous place on the 5mm tool if it's used more often than others?

    An elastic band is even easier - and they come in various colours,
    too.

    Not all of us have red nail polish in our tool boxes. I have Coleman
    Green and Black, which happen to match a couple of my bikes. If I could
    find Celeste Green, I'd add that.

  4. richard said:

    Why not simply put a bit of red nail polish (or equivalent) on a
    conspicuous place on the 5mm tool if it's used more often than others?

    Ah ha! Yet another I can do with the multiple colors of electrical tape
    in my toolbox.

    --
    Dane Buson - [email hidden]
    Any road followed to its end leads precisely nowhere.
    Climb the mountain just a little to test it's a mountain.
    From the top of the mountain, you cannot see the mountain.
    -- Bene Gesserit proverb, "Dune"

  5. methinks Murphy has little to do with the unreadability of a black tool.
    Entropy of the eye's focasing mechanism might, though. IOW, you're
    getting old. (hey, it happens to the best of us).

    Chris "Now where did my reading glasses go?" Zacho

    - -
    Comments and opinions compliments of,
    "Your Friendly Neighborhood Wheelman"

    My web Site:
    http://geocities.com/czcorner

    To E-mail me:
    ChrisZCorner "at" webtv "dot" net

  6. Patrick Lamb said:

    Ob bike: I was working on my bike today.

    I have a three-way Allen/Bondhus wrench like the one shown at
    http://tinyurl.com/zaxoj8 and it's a wonderful wrench set. Performs
    well (if a tool can do such a thing), I'd buy another just like it,
    blah, blah, blah.

    What I want to know is why the 5 mm wrench disappears so readily?
    Seems like every time I put it down, the 5 mm end falls into a black
    hole, and I have to stop what I'm doing, carefully focus on the
    blessed thing, and read each size before I can identify the 5 mm that
    I usually want. I can usually tell the 4 from the 5 by sight, but the
    6 also looks like the 5. By sheer chance, you'd thing 1/3 of the time
    without looking I'd get the 5. A glance to eliminate the 4, and the
    statistician would say I'd get the 5 one out of every two times. I
    think I hit zero out of 25-30 times this afternoon.

    Is this a known property of black tools, or is Murphy's Law hard at
    work?

    Yes, and no.

    Paint your spanners, etcetera, with colours that indicate their size.
    The resistor colour code is easily applicable:
    Black, Brown, Red, Orange, Yellow, Green Blue, Violet, Grey, White
    (0-9)

  7. Dane Buson said:
    richard said:

    Why not simply put a bit of red nail polish (or equivalent) on a
    conspicuous place on the 5mm tool if it's used more often than others?

    Ah ha! Yet another I can do with the multiple colors of electrical tape
    in my toolbox.

    Ooh, I like this one best. And the yellow (to match my yellow bar tape)
    will make the thing visible in the dark parts of my garage, too!

    Pat

  8. Chris Z The Wheelman said:

    methinks Murphy has little to do with the unreadability of a black tool.
    Entropy of the eye's focasing mechanism might, though. IOW, you're
    getting old. (hey, it happens to the best of us).

    Chris "Now where did my reading glasses go?" Zacho

    If I could find my bifocals, I could help you look for them. 🙂

  9. "Pat Lamb" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:
    Dane Buson said:
    richard said:

    Why not simply put a bit of red nail polish (or equivalent) on a
    conspicuous place on the 5mm tool if it's used more often than others?

    Ah ha! Yet another I can do with the multiple colors of electrical tape
    in my toolbox.

    Ooh, I like this one best. And the yellow (to match my yellow bar tape)
    will make the thing visible in the dark parts of my garage, too!

    This is like my great discovery: putting a strip of reflective tape on my U
    lock. When I'm in the dark parking garage at work, it used to be hard to
    find which of the many U locks hanging from it was mine. Now it's easy - I
    just spot the one with the reflective tape. Even when it's dark outside, I
    can find it.

    --
    Warm Regards,

    Claire Petersky
    http://www.bicyclemeditations.org/
    See the books I've set free at: http://bookcrossing.com/referral/Cpetersky

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.