I got my first proper 2 way soaking this morning. At least I didn't get wet
socks having not bothered with them as it was only another thing to get
saturated.
The large numbers of pedestrians with umbrellas over their faces and not
looking where they're going (often on cycle lanes) is getting a bit annoying
too, especially when they don't even look when you're ringing at them. So
much for disc brakes being better in the wet - they were about as good as
the V brakes on the rear!
Filtering through the traffic jam was unusually good this morning however,
there were only three cars veering into the on road cycle lanes but I was
able to scoot past them and a couple of cars and a WVM even moved over the
right a little so I could squeeze through. Usually they move over to the
left to try and stop me getting past.
For some reason though today my chain keeps jumping at regular intervals
when it's on the smallest cog on the back even though it was fine
yesterday - any ideas what the cause might be and why it's only happened
today? The chain and gears are pretty new (only done about 100 and 250
miles respectively).
After a minor drenching yesterday, there were spots of rust appearing on the
chain and the rear gears this morning - is there any way to avoid this apart
from drying everything as soon as I get back?
--
peter
Cheap train tickets database
http://www.petereverett.co.uk/tickets/
Email sent to this address is generally deleted upon arrival
Visit website if you want to contact me