Anyone taken all the paint off an aluminum bike? How'd you do it? How'd it come out?
TIA,
Lee
A community for cyclists, gear, training and racing.
Cycling Equipment · Public discussion
Thread navigation
Go to the original post, the replies on this page, or the latest preserved contribution.
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
Anyone taken all the paint off an aluminum bike? How'd you do it? How'd it come out?
TIA,
Lee
I used a commercial paint stripper to remove paint from a Cannondale frame. It took the paint off
easily. - Bill "Lee" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:Anyone taken all the paint off an aluminum bike? How'd you do it? How'd it come out?
TIA,
Lee
"BilDom" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:I used a commercial paint stripper to remove paint from a Cannondale
frame.
Quoted message said:It took the paint off easily. - Bill
Careful. Some of the (early) aluminum frames are glued rather than TIGed. Paint stripper could
dissolve the glue.
Regards, Larry
Lawrence said:"BilDom" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:I used a commercial paint stripper to remove paint from a Cannondale
frame.Quoted message said:It took the paint off easily. - Bill
Careful. Some of the (early) aluminum frames are glued rather than TIGed. Paint stripper could
dissolve the glue.
Thanks, Larry...how do I tell?
Lee
Lee said:
Lawrence said:"BilDom" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:I used a commercial paint stripper to remove paint from a Cannondale
frame.Quoted message said:It took the paint off easily. - Bill
Careful. Some of the (early) aluminum frames are glued rather than TIGed. Paint stripper could
dissolve the glue.Thanks, Larry...how do I tell?
Look for the weld beads. Especially on aluminum these tend to be pretty bulky.
Bonded frames tend to show seams, even on painted frames, where the tubes join the lugs.
jeverett3<AT>earthlink<DOT>net home.earthlink.net~jeverett3Open ↗
"John Everett" <[email hidden]> wrote in message
"]news:[email hidden]...
Quoted message said:Lee said:
Lawrence said:"BilDom" <[email hidden]> wrote in message "]news:[email hidden]...
> I used a commercial paint stripper to remove paint from a Cannondale
frame.
> It took the paint off easily. - BillCareful. Some of the (early) aluminum frames are glued rather than
TIGed.
Quoted message said:Quoted message said:Quoted message said:Paint stripper could dissolve the glue.
Thanks, Larry...how do I tell?
Look for the weld beads. Especially on aluminum these tend to be pretty bulky.
Bonded frames tend to show seams, even on painted frames, where the tubes join the lugs.
Thanks John!
Lee
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.