"Stress Relieving" wheels.

Same side of flange. The standard way is to squeezing parallel spokes
together. You can also put old crankarm (or piece of broomstick) in between
each pair of spokes, about 1/3 of the way between their crossing point and the
rim, and use a prying action.

Mike Yankee

(Address is munged to thwart spammers.
To reply, delete everything after "com".)

Travers Waker said:

"Stress Relieving" of wheels is often mentioned in this group and often
described as "squeezing pairs of spokes together".

Quoted message said:

Could someone explain to me which two spokes make up a pair to be squeezed?
Is it one spoke from each hub flange (i.e. on opposite sides of the wheel),
or a pair of spokes coming from the same hub flange (same side of the
wheel)?

You should be squeezing two pairs at a time, one pair on each side of the
wheel. Find two near parallel spokes on one side, and another pair (nearly
adjacent) on the other side. Give both pairs a good solid squeeze.
Then work your way around the wheel until you've squeezed them all. It's a
good idea to wear leather gloves to protect your hands.

Art Harris

Travers Waker said:

"Stress Relieving" of wheels is often mentioned in this group and
often described as "squeezing pairs of spokes together".

Quoted message said:

Could someone explain to me which two spokes make up a pair to be
squeezed? Is it one spoke from each hub flange (i.e. on opposite
sides of the wheel), or a pair of spokes coming from the same hub
flange (same side of the wheel)?

http://draco.acs.uci.edu/rbfaq/FAQ/8c.1.html

Jobst Brandt
[email hidden]

Travers Waker said:

Hi.

"Stress Relieving" of wheels is often mentioned in this group and often
described as "squeezing pairs of spokes together".

Could someone explain to me which two spokes make up a pair to be squeezed?
Is it one spoke from each hub flange (i.e. on opposite sides of the wheel),
or a pair of spokes coming from the same hub flange (same side of the
wheel)?

Parallel spokes, on a particular side of the wheel. You'll typicall
grab a pair in your left hand, and a pair in your right.

Wear eye protection while doing this. You also need leather gloves,
because squeezing hard enough to be effective will really hurt your
hands. You need to squeeze pretty hard to be effective.

Bill-<< You also need leather gloves,
because squeezing hard enough to be effective will really hurt your
hands. >><BR><BR>

Nancy....

;-lo

Peter Chisholm
Vecchio's Bicicletteria
1833 Pearl St.
Boulder, CO, 80302
(303)440-3535
http://www.vecchios.com
"Ruote convenzionali costruite eccezionalmente bene"

Bill Lloyd wrote in message ...

Quoted message said:

Quoted message said:

Parallel spokes, on a particular side of the wheel. You'll typicall
grab a pair in your left hand, and a pair in your right.

Wear eye protection while doing this. You also need leather gloves,
because squeezing hard enough to be effective will really hurt your
hands. You need to squeeze pretty hard to be effective.

How do you know when it's hard enough? How do you judge effectiveness?
What effect?

Trevor