Mountain Bikes · Public discussion

SRAM 5.0 Cassette

Started by Peter · · Last activity · 6 posts · 1,328 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Mountain Bikes
Published
1 February 2003
Last activity
2 February 2003
Original author
Peter
Posts
6
Discussion status
Public discussion
Total views
1,328
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–6 of 6
Posts remain in their original chronological order.

Text size
  1. My bike (yeah it's not over $5K) has an SRAM 5.0 8spd Cassette. I was wondering if anybody else has
    noticed a rather big jump when switching from about the 4th to 3rd cog. I find it a large skip for a
    cassette, and it's a pain in the ass when you're climbing.

    Cheers,

    Peter

  2. Quoted message said:

    My bike (yeah it's not over $5K) has an SRAM 5.0 8spd Cassette. I was wondering if anybody else
    has noticed a rather big jump when switching


    from

    Quoted message said:

    about the 4th to 3rd cog. I find it a large skip for a cassette, and it's


    a

    Quoted message said:

    pain in the ass when you're climbing.

    Cheers,

    Peter

    How many miles are on it? I replace my cassette every 1,000 miles or so (dirt miles anyway). Ramping
    problems are pretty rare on SRAM stuff from my experience and much better than Shimano under load
    (going uphill). I'm between 190 and 195 so I'm a pretty heavy load on the chain and cassette going
    uphill. I've run XT and Sram 7.0 stuff and have less problems w/the Sram.

    Greg

  3. Brand new. No more than 100 km on it.

  4. "Peter" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    My bike (yeah it's not over $5K) has an SRAM 5.0 8spd Cassette. I was wondering if anybody else
    has noticed a rather big jump when switching


    from

    Quoted message said:

    about the 4th to 3rd cog. I find it a large skip for a cassette, and it's


    a

    Quoted message said:

    pain in the ass when you're climbing.

    Reinstall it on a $5K+ bike.

    Bill "it'll still be a big jump but you'll be too poor to care" S.

  5. Peter said:

    My bike (yeah it's not over $5K) has an SRAM 5.0 8spd Cassette. I was wondering if anybody else has
    noticed a rather big jump when switching from about the 4th to 3rd cog. I find it a large skip for
    a cassette, and it's a pain in the ass when you're climbing.

    Cheers,

    Peter


    I'm actually getting sick of saying what I'm about to say .....errr, eh, umm, so I guess I
    won't say it.

    Peace,

    Bill The mind serves properly as a window glass rather than as a reflector, that is, the mind should
    give an immediate view instead of an interpretation of the world.
    :-]

  6. Peter said:

    My bike (yeah it's not over $5K) has an SRAM 5.0 8spd Cassette. I was wondering if anybody else has
    noticed a rather big jump when switching from about the 4th to 3rd cog. I find it a large skip for
    a cassette, and it's a pain in the ass when you're climbing.

    The SRAM 8 speed cassette has the same cogs as the 9 speed Shimano cassettes through most of the
    range, so I don't think there's anything "unusual" about the spacing between the gearing.

    The SRAM cassettes have 11,12, 14, 16, 18, 21. Then the 11-28 cassette goes 24, 28, while the 11-32
    cassette goes 26, 32. The 21-26 jump is pretty big (though not the one you mention), but personally
    I like the 21-26-32 progression. If it's steep enough I need those gears, I don't want tiny little
    jumps between gears anyway.

    Mark Hickey Habanero Cycles habcycles.comhabcycles.com Home of the $695 ti frame

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.