When i put the front brake on (normal pads) it make a horrible squeeky rubbery noise as it comes
into contact with the rims. What do I need to od to resolve this?
Cheers
--
Darren
A community for cyclists, gear, training and racing.
Road Cycling · Public discussion
Thread navigation
Go to the original post, the replies on this page, or the latest preserved contribution.
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
When i put the front brake on (normal pads) it make a horrible squeeky rubbery noise as it comes
into contact with the rims. What do I need to od to resolve this?
Cheers
--
Darren
Darren wrote on 8/31/03 4:39 AM:
Quoted message said:When i put the front brake on (normal pads) it make a horrible squeeky rubbery noise as it comes
into contact with the rims. What do I need to od to resolve this?
You'll need to slightly "toe-in" the pads. They should be about a dime's width ahead of the back
when you put your brakes on.
Any competent bike shop can do this relatively cheaply, or it's not a bad way to learn about the
adjustments of your bike.
If the bike is older, the brake pad may have also dried out or hardened, which would make
this worse.
Hope that helps,
-- Jim
Jim Edgar said:Quoted message said:When I put the front brake on (normal pads) it make a horrible squeaky rubbery noise as it comes
into contact with the rims. What do I need to do to resolve this?
For my use, the best pads are Kool-Stop Salmon-red: sheldonbrown.combrakeshoes.htmlOpen ↗
Quoted message said:You'll need to slightly "toe-in" the pads. They should be about a dime's width ahead of the back
when you put your brakes on.
Don't bend the brake caliper!
Quoted message said:Any competent bike shop can do this relatively cheaply, or it's not a bad way to learn about the
adjustments of your bike.
draco.acs.uci.edu8f.16.htmlOpen ↗
Jobst Brandt [email hidden] Palo Alto CA
Take the pads off, and rub them across a file or sandpaper until the shininess has gone.
Darren' (spamtrap - do not use!!!) said:When i put the front brake on (normal pads) it make a horrible squeeky rubbery noise as it comes
into contact with the rims. What do I need to od to resolve this?Cheers
Jim Edgar" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:Darren wrote on 8/31/03 4:39 AM:
Quoted message said:When i put the front brake on (normal pads) it make a horrible squeeky rubbery noise as it comes
into contact with the rims. What do I need to
od
Quoted message said:Quoted message said:to resolve this?
You'll need to slightly "toe-in" the pads. They should be about a dime's width ahead of the back
when you put your brakes on.Any competent bike shop can do this relatively cheaply, or it's not a bad way to learn about the
adjustments of your bike.
Well there's the problem! Where is that mythical bike shop?
I used to know one...
Doug
Doug Purdy at [email hidden] wrote on 9/1/03 7:44 PM:
Quoted message said:Quoted message said:Any competent bike shop can do this relatively cheaply, or it's not a bad way to learn about the
adjustments of your bike.Well there's the problem! Where is that mythical bike shop?
Brigadoon Cycles. Opens once every 5 years or so.
-- je
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.