UK and Europe · Public discussion

Slime inners, and punctures

Started by Stainlesssteelr · · Last activity · 12 posts · 1,146 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
UK and Europe
Published
16 April 2003
Last activity
17 April 2003
Original author
Stainlesssteelr
Posts
12
Discussion status
Public discussion
Total views
1,146
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–12 of 12
Posts remain in their original chronological order.

Text size
  1. Has anyone else tried using the Slime inners, that sit between the tube and the tyre?

    I have to say that so far they are proving to be useless, having had two punctures in as many weeks
    from a stone and thorn which went straight through the liner.

    Any good puncture-proof solutions out there? The forest I ride through has a large number of flints
    waiting to kill my tyres.

    --
    StainlessSteelRat Ace Ventura: Do you really wanna know why I do what I do? Melissa Robinson: No I'm
    not sure I really wanna know any more. Ace Ventura: Well you better be sure, because once you get
    inside my head there's no turning back baby.

  2. "StainlessSteelRat" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    Has anyone else tried using the Slime inners, that sit between the tube and the tyre?

    Surely all that slime can't do much for tube weight! They say weight on the wheels feels 3 times
    heavier than weight on the bike!

  3. Adrian Boliston said:
    Quoted message said:

    Has anyone else tried using the Slime inners, that sit between the tube and the tyre?

    Surely all that slime can't do much for tube weight! They say weight on the wheels feels 3 times
    heavier than weight on the bike!

    These are the plastic strips that sit between the tube and the tyre *not* the liquid stuff, I
    wouldn't have used that. In some ways it's a damn good idea, because certain plastics are very
    puncture resistant. Unfortunately the Slime inners are not made of this :-(

    --
    StainlessSteelRat "The most beautiful thing we can experience is the mysterious. It is the source of
    all art and science." -- Albert Einstein

  4. (Russell) said:

    Can anyone give me an idea why my chain refuses to stay on the big ring?

    Quoted message said:

    The bike is [...] old

    Front chainring is worn out. If you look from the side it's probably "hooked". It the chainline is
    very diagonal, the sideways force from it is enough to pull it off. The fix is often to not use low
    gears at the back, without shifting down at the front first.

    You might even find that just cleaning the chain is enough to fix it !

    Or it could be the front changer out of alignment, or it could even be the shifter/cables
    (increasingly unlikely).

    www.sheldonbrown.com knows all.

    BTW - If this has triple chainrings (which I doubt) then _don't adjust the cables. There are two
    little screws on the changer itself, which set the limit positions. Set these first for the outer
    two rings, then just use the cable adjuster for the middle ring.

  5. StainlessSteelRat said:

    Any good puncture-proof solutions out there? The forest I ride through has a large number of
    flints waiting to kill my tyres.

    Kevlar?

    --

    -Alex

    ----------------------------------
    [email hidden]

    alexpg.ath.cxcycling.php westerleycycling.org.ukwesterleycycling.org.uk
    ----------------------------------

  6. "StainlessSteelRat" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    Has anyone else tried using the Slime inners, that sit between the tube


    and

    Quoted message said:

    the tyre?

    I have to say that so far they are proving to be useless, having had two punctures in as many
    weeks from a stone and thorn which went straight through the liner.

    I'm surprised to hear that. I use liners - I'm pretty sure they're the 'slime' ones - and I swear by
    them (not at them). They really do work for me, at least over glass-strewn London roads. I've got
    tyres that are slashed through the casing all over, in some places the gashes are so wide the liner
    is practically the only thing stopping the tube popping out through the tyre, but nothing has ever
    penetrated the liner. It's thick and heavy enough that it seems it ought to be able to stop most
    ordinary road - or forest - hazards going through.

    At least, I doubt there's anything better. If you're using liners and still getting punctures
    perhaps the only other thing to try is the other slime product in addition to the liner - that
    squishy stuff that goes inside the tube and is supposed to seal any punctures instantly. I've also
    had good results with that (used it before I put the liners in instead). At worst it turned what
    would have been an instant flat into a slow leak, keeping enough pressure in the tyre to continue
    home (this was on a wet day, and water was penetrating between the tyre and tube making it, I
    suppose, difficult for the stuff to set and seal) , at best it really did seal punctures leaving the
    tubes needing no further attention at all. The two together might keep your tyres up enough to keep
    riding and get home before having to deal with punctures acquired en route!

    Rich

  7. Alex Graham said:
    Quoted message said:

    Any good puncture-proof solutions out there? The forest I ride through has a large number of
    flints waiting to kill my tyres.

    Kevlar?

    Is there actually an implementation of this for bike tyres? Or am I going to have wrap bullet-proof
    vests around my wheels?

    --
    StainlessSteelRat "Buffy, when I said you could slay vampires and have a social life, I didn't mean
    at the same time." -- Giles

  8. StainlessSteelRat said:
    Alex Graham said:
    Quoted message said:

    Any good puncture-proof solutions out there? The forest I ride through has a large number of
    flints waiting to kill my tyres.

    Kevlar?

    Is there actually an implementation of this for bike tyres? Or am I going to have wrap
    bullet-proof vests around my wheels?

    Yes, there are loads of tyres with kevlar belts out there - Schwalbe Marathons for one.

    --

    -Alex

    ----------------------------------
    [email hidden]

    alexpg.ath.cxcycling.php westerleycycling.org.ukwesterleycycling.org.uk
    ----------------------------------

  9. StainlessSteelRat said:
    Adrian Boliston said:
    Quoted message said:

    Has anyone else tried using the Slime inners, that sit between the tube and the tyre?

    Surely all that slime can't do much for tube weight! They say weight on the wheels feels 3 times
    heavier than weight on the bike!

    These are the plastic strips that sit between the tube and the tyre *not* the liquid stuff, I
    wouldn't have used that. In some ways it's a damn good idea, because certain plastics are very
    puncture resistant. Unfortunately the Slime inners are not made of this :-(

    I use them on an MTB with slicks on and have only had one puncture since fitting them, and that was
    a fatigue puncture at the end of the inner part of the overlap. However, I'd hardly had any
    punctures with this tyre before anyway (Continental Goliath), so statistically it might not be a
    good sample, in the 6 or 8 years I've used them I've had about 3. I only started using the slime
    strips after a spate of punctures with some knobblies I use in the winter, and left them on when I
    changed back to the slicks.

    Trev

  10. Alex Graham said:

    Yes, there are loads of tyres with kevlar belts out there - Schwalbe Marathons for one.

    Yes they do. I've just mended a puncture on one that has covered barely 300 miles :-(

    John B

  11. John B said:

    Yes they do. I've just mended a puncture on one that has covered barely 300 miles :-(

    Its all about luck really, isnt it. Bad luck that time! 🙂

    --

    -Alex

    ----------------------------------
    [email hidden]

    alexpg.ath.cxcycling.php westerleycycling.org.ukwesterleycycling.org.uk
    ----------------------------------

  12. "StainlessSteelRat" <[email hidden]> wrote in message
    news:<[email hidden]>...

    Quoted message said:

    Has anyone else tried using the Slime inners, that sit between the tube and the tyre?

    I have to say that so far they are proving to be useless, having had two punctures in as many
    weeks from a stone and thorn which went straight through the liner.

    Any good puncture-proof solutions out there? The forest I ride through has a large number of
    flints waiting to kill my tyres.


    Try Kairfree tyre liners. Not puncture free but at least 90% reduction. Oh and they're a
    bugger to fit.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.