Australia and New Zealand · Public discussion

single cranksets for rohloff?

Started by till! · · Last activity · 4 posts · 526 views

Thread details

What we know about this thread

Original section
Australia and New Zealand
Published
20 November 2004
Last activity
21 November 2004
Original author
till!
Posts
4
Discussion status
Public discussion
Total views
526
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. Hiyas,

    my ISP's news server didnt seem to be propagating, so I thought Id try again from here (cycling forums).

    Stronglight's single cranksets dont seem to be very widely distributed in aus, and apparently rohloffs like as straight a chainline as you can provide so I was seeking find something as appropriate as possible.

    There are the stronglight impact, mygal and aero(al), are there any better available alternatives? Im looking for 46-50t, with the ability to pick and chose if possible=)

    till

  2. "till!" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:


    Stronglight's single cranksets dont seem to be very widely distributed
    in aus,

    That could be because most riders find it hard to get anywhere using just
    one leg. I prefer two cranks :-)

    Cheers
    Peter

  3. You can pretty much use any crankset you want, just have to make sure of the following things and you won't have to worry about your front ring having pins or ramped and your chain will not come off.

    1) Get your chainline as straight as possible
    2) Get your chain as tight as possible (without being too tight of course)
    3) Match your rear cog, front ring and chain sizes. i.e. 3/32 or 1/8 ... use one size for all, don't mix.
    4) Get a non-shifting chain (single speed, BMX or track chains are good)

    hope this helps

    cheers
    koon

  4. I just use an MTB crankset and take off the two small chainrings. I used to
    use an XTR splined crankset mounted on an Ultegra bottom bracket, which gave
    exactly the correct chainline. When that crank bent in a crash I replaced it
    with a Deore LX square taper crankset on a Dura-Ace 103mm bottom bracket,
    which also gives the correct chainline.

    For riding in Australia with just a saddlebag I've always found a 46t
    chainring about right. It gives a big enough top gear to keep up with the
    bunch on training rides and a small enough gear to get up the hills here. On
    a recent tour in Switzerland I replaced the 46 with a 36 and was glad that I
    did, as a couple of the mountains I climbed averaged 13-14% gradient over
    the whole climb and had sections > 20% gradient (max 28% on Rigi Kulm).

    Nick

    "till!" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:


    Hiyas,

    my ISP's news server didnt seem to be propagating, so I thought Id try
    again from here (cycling forums).

    Stronglight's single cranksets dont seem to be very widely distributed
    in aus, and apparently rohloffs like as straight a chainline as you can
    provide so I was seeking find something as appropriate as possible.

    There are the stronglight impact, mygal and aero(al), are there any
    better available alternatives? Im looking for 46-50t, with the ability
    to pick and chose if possible=)

    till

    --
    till!

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.