Sigma RDS wireless mount stupidness

In article <[email hidden]>,

ZeeExSixAre said:

So how do you move a Sigma RDS wireless mount from one bike to the next?!?!?
They use zip-ties so that it's permanently anchored to the bike... how do
they expect you to switch bikes?

Has anyone figured out a rubber-band solution?

Zip ties? Like every other computer on the planet?

Step 1: cut zip ties with diagonal cutter. Be careful not to nick the
fork.

Step 2: put new zip ties on, and attach mount to the new bike. These are
available in multi-packs from a wide variety of stores, but a big-box
hardware store will probably be able to sell you a lifetime quantity for
several bucks.

Step 3: there is no step three.

Zip ties are single-use,
--
Ryan Cousineau, [email hidden] http://www.sfu.ca/~rcousine/wiredcola/
President, Fabrizio Mazzoleni Fan Club

Ryan Cousineau said:

In article <[email hidden]>,

ZeeExSixAre said:

So how do you move a Sigma RDS wireless mount from one bike to the
next?!?!? They use zip-ties so that it's permanently anchored to the
bike... how do they expect you to switch bikes?

Has anyone figured out a rubber-band solution?

Zip ties? Like every other computer on the planet?

Step 1: cut zip ties with diagonal cutter. Be careful not to nick the
fork.

Step 2: put new zip ties on, and attach mount to the new bike. These
are available in multi-packs from a wide variety of stores, but a
big-box hardware store will probably be able to sell you a lifetime
quantity for several bucks.

Step 3: there is no step three.

Zip ties are single-use,

I'm assuming you don't have one of these then. It's close to impossible to
get the old zip-tie out of the mount. If my digital camera worked, I'd take
a pic to show you what I meant.

These are some weirdass size of zip-tie... I have about 6 different
varieties on hand, and none of them fit. Some are too large to fit in the
recess, some don't have long-enough lengths... bah!

I'm going to go with my friend's suggestion of using a pin to disengage the
zip-tie mount, once I figure out how to get the old zip-tie out.

--
Phil, Squid-in-Training

Ryan Cousineau <[email hidden]> wrote in message news:<[email hidden]>...

Quoted message said:

In article <[email hidden]>,

ZeeExSixAre said:

So how do you move a Sigma RDS wireless mount from one bike to the next?!?!?
They use zip-ties so that it's permanently anchored to the bike... how do
they expect you to switch bikes?

Has anyone figured out a rubber-band solution?

Zip ties? Like every other computer on the planet?

Well not quite. Sigma Sports rely (mostly) on elastic bands, which
(i) simplifies installation and (ii) makes it easy to move them
around.

Quoted message said:

Step 1: cut zip ties with diagonal cutter. Be careful not to nick the
fork.

Step 2: put new zip ties on, and attach mount to the new bike. These are
available in multi-packs from a wide variety of stores, but a big-box
hardware store will probably be able to sell you a lifetime quantity for
several bucks.

Yes, but the Sigma RDS ones are a very small size and (at least on the
one I have) have to fit through the unit -- so you can't use
slightly-too-big ones. I's a bit more of a hunt than what you
imagine,

Peter Storey

"ZeeExSixAre" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

So how do you move a Sigma RDS wireless mount from one bike to the

next?!?!?

Quoted message said:

They use zip-ties so that it's permanently anchored to the bike... how do
they expect you to switch bikes?

Has anyone figured out a rubber-band solution?

--
Phil, Squid-in-Training

use the rubber bands the product was supplied with?
What am I missing?????

In article <[email hidden]>,
[email hidden] says...

Quoted message said:

So how do you move a Sigma RDS wireless mount from one bike to the next?!?!?
They use zip-ties so that it's permanently anchored to the bike... how do
they expect you to switch bikes?

Cut the zip ties, and put some new ones on the next bike. You can get a
package of 50 for about $3 at a hardware store.

--
Remove the ns_ from if replying by e-mail (but keep posts in the
newsgroups if possible).

phil-<< So how do you move a Sigma RDS wireless mount from one bike to the
next?!?!?
They use zip-ties so that it's permanently anchored to the bike... how do
they expect you to switch bikes? >><BR><BR>

Buy a second mount??

Peter Chisholm
Vecchio's Bicicletteria
1833 Pearl St.
Boulder, CO, 80302
(303)440-3535
http://www.vecchios.com
"Ruote convenzionali costruite eccezionalmente bene"

In article <[email hidden]>, vecchio51
@aol.com says...

Quoted message said:

phil-<< So how do you move a Sigma RDS wireless mount from one bike to the
next?!?!?
They use zip-ties so that it's permanently anchored to the bike... how do
they expect you to switch bikes? >><BR><BR>

Buy a second mount??

I didn't even think about him meaning that he wants to be able to switch
it back and forth between two different bikes. Additional mounts are
cheap. My LBS had a drawer full of them and just gave me one when I
wanted to buy it.

.....

--
Remove the ns_ from if replying by e-mail (but keep posts in the
newsgroups if possible).

ZeeExSixAre said:

So how do you move a Sigma RDS wireless mount from one bike to the
next?!?!? They use zip-ties so that it's permanently anchored to
the bike... how do they expect you to switch bikes?

Umm. You cut the zip ties with something sharp. Then you use new
zip ties to attach it to the new bike. Or you buy a couple of mounts
and just move the computer.

<snip>

Quoted message said:

Yes, but the Sigma RDS ones are a very small size and (at least on the
one I have) have to fit through the unit -- so you can't use
slightly-too-big ones. I's a bit more of a hunt than what you
imagine,

Peter Storey

Your LBS probably has LOTS of this size zip tie. If not, then put two small
ones together.

Yes, moving the Sigma wireless mount's a PITA. I've had to switch bars on a few
bikes. Ugh. You have to cut UNDER as well as over the "head" and work it out
CAREFULLY. If you don't take it out carefully, you'll crack the mount. Don't
ask how I know.

The next problem is the double stick tape. It comes off when you pull off the
mount. I've used inner tubes cut down for the occasion when I can't find my
supply of tape.

I haven't looked at my Sigma mounts in a while to try and figure out how to get
a rubberband mount in there. I don't know that it can be done... The thing I
came up with off the top of the head is to make a loop out of a small zip tie
and wrap the rubber band around that.

HTH,

M

David Kerber ns_dkerber@ns_ids.net said:

In article <[email hidden]>, vecchio51
@aol.com says...

Quoted message said:

phil-<< So how do you move a Sigma RDS wireless mount from one bike
to the next?!?!? They use zip-ties so that it's permanently
anchored to the bike... how do they expect you to switch bikes?

Quoted message said:

><BR><BR>

Buy a second mount??

I didn't even think about him meaning that he wants to be able to
switch it back and forth between two different bikes. Additional
mounts are cheap. My LBS had a drawer full of them and just gave me
one when I wanted to buy it.

The wireless mounts- to which the OP referred- aren't cheap.

Peter Storey" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

Yes, but the Sigma RDS ones are a very small size and (at least on the
one I have) have to fit through the unit -- so you can't use
slightly-too-big ones. I's a bit more of a hunt than what you
imagine,

Peter Storey

Don't have the Sigma, but almost every cycle computer in existance has the
same problem. Just had this issue with my Vetta V100 the other day, and
ended up putting two zip ties together to get a long enough length. The
hardware stores only sell the minature zip ties in a 4" length. This is a
little too short. This online source
(http://store.yahoo.com/buycableties/miniature-18lb-cable-ties.html) seems
to sell these mini zip ties in 4, 6 and 8" lengths. Of course the shipping
will cost more than the zip ties. You might also try seeing if your local
electrical supply house can special order them.