Shim for Klein 1 1/16" stem?

"Matt O'Toole" wrote: Does anyone make a shim for using a standard 1 1/8"
stem on a Klein 1/16" steerer?
^^^^^^^^^^^^^^^
I assume you mean "Klein 1 1/16". In that case the shim would have to have
negative thickness.

What are you talking about?!?! ARE YOU NUTZ?

1/16 is less than 1/8
The shim would have thickness. As for finding the shim, dunno.

david

david said:

What are you talking about?!?! ARE YOU NUTZ?

1/16 is less than 1/8
The shim would have thickness. As for finding the shim, dunno.

david

The OP forgot the first "1" in the "1 1/16'."

--
Phil, Squid-in-Training

"Matt O'Toole" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

Does anyone make a shim for using a standard 1 1/8" stem on a Klein 1/16"
steerer?

Matt O.

Yup $6.50
May have to shorten it a bit.
http://www.bikeparts.com/search_results.asp?ID=WZ1138

Yup $6.50

http://www.bikeparts.com/search_results.asp?ID=WZ1138

"david" wrote: What are you talking about?!?! ARE YOU NUTZ?
^^^^^^^^^^^^^^^^
Not so much NUTZ as ignorant. I thought Matt was trying to put a 1 1/8"
stem into a 1 1/16" headtube.

Quoted message said:

Does anyone make a shim for using a standard 1 1/8" stem on a Klein 1/16"
steerer?

Matt O.

Matt: Don't know why everyone's giving you such a bad time on this one. Yes,
Klein makes a shim that does the trick, runs about $7 if I recall correctly.
Should be available from your local dealer (although most likely they'll
have to special order it for you). Sorry I don't have the part # handy, but
if you run into trouble let me know and I can find it, and confirm they're
still available.

--Mike-- Chain Reaction Bicycles
www.ChainReactionBicycles.com