Sherwin factoid

Quoted message said:

I heard Paul Sherwin say that for wet conditions, tires
should be pumped

to

Quoted message said:

65-75 psi, and when it's dry you can even get up to 100
psi. Now I

normally

Quoted message said:

pump my vredesteins to 145 psi. Is he wrong or am I?

Maybe a difference between clinchers and sew-ups?

I hear that too. I think he's mistaken. I typically race at
140-150 psi on dry conditions. I'll drop down to 100 psi in
wet conditions.

~ AB ~

"Callistus Valerius" <[email hidden]> wrote in
message -"]news:[email hidden]-
ink.net...

Quoted message said:

I heard Paul Sherwin say that for wet conditions, tires
should be pumped

to

Quoted message said:

65-75 psi, and when it's dry you can even get up to 100
psi. Now I

normally

Quoted message said:

pump my vredesteins to 145 psi. Is he wrong or am I?

-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
newsfeeds.comnewsfeeds.comOpen ↗ - The #1 Newsgroup Service in the
World! -----== Over 100,000 Newsgroups - 19 Different
Servers! =-----

"Super Fred" <timlambert @ mindspring . com> wrote in message
news:RcUGc.40748$XM6.38535@attbi_s53...

Quoted message said:

Quoted message said:

I heard Paul Sherwin say that for wet conditions, tires
should be pumped

to

Quoted message said:

65-75 psi, and when it's dry you can even get up to 100
psi. Now I

normally

Quoted message said:

pump my vredesteins to 145 psi. Is he wrong or am I?

Maybe a difference between clinchers and sew-ups?

Was just a guess - an incorrect one. Oh well.

Callistus Valerius said:

I heard Paul Sherwin say that for wet conditions, tires
should be pumped to 65-75 psi, and when it's dry you can
even get up to 100 psi. Now I normally pump my vredesteins
to 145 psi. Is he wrong or am I?

guess that's why Sherwin was a pro rider, not a mechanic :-)

"David Off" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Callistus Valerius said:

I heard Paul Sherwin say that for wet conditions, tires
should be pumped to 65-75 psi, and when it's dry you can
even get up to 100 psi. Now I normally pump my
vredesteins to 145 psi. Is he wrong or am I?

guess that's why Sherwin was a pro rider, not a
mechanic :-)

Maybe it was 100 psi 30 years ago.

M.

Callistus Valerius said:

I heard Paul Sherwin say that for wet conditions, tires
should be pumped to 65-75 psi, and when it's dry you can
even get up to 100 psi. Now I normally pump my vredesteins
to 145 psi. Is he wrong or am I?

I too was suprised. I used to pump my time trial rear
(Gommitalia tubular on HED disc) to 140-145 psi.

jeverett3<AT>earthlink<DOT>net
home.earthlink.net~jeverett3Open ↗

"Callistus Valerius" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

I heard Paul Sherwin say that for wet conditions, tires
should be pumped

to

Quoted message said:

65-75 psi, and when it's dry you can even get up to 100
psi. Now I

normally

Quoted message said:

pump my vredesteins to 145 psi. Is he wrong or am I?

You are absolutely wrong along with many other new
cyclists. That is the mark of a noob or worse, a clueless
veteran; overpumping your tires. Still, in road ITTs many
guys use up to 120 or more depending on conditions. Using
145 on the road us just stupid in most cases although I can
think of some rider\road\equipment combinations that might
benefit from this level of pressure, you are probably
following the silly tradition of using the manufacturer's
maximum burst pressure label as a "recommended" pressure.
Dumb dumb dumb...

BTW, to save time in the future you are almost always wrong.
I will let you know if you happen to get something right. Is
that a deal?

Another factoid: Paul uses no "i" in his name AFAIK. "Paul
Sherwen", veteran of 7 Tours including riding his last Tour
with Roche in 1983 (IIRC...).

Michael said:

"David Off" <[email hidden]> wrote in
message news:40ec1cf5$0$20044$79c14f64@nan-newsreader-
04.noos.net...

Quoted message said:

Callistus Valerius said:

I heard Paul Sherwin say that for wet conditions, tires
should be pumped to 65-75 psi, and when it's dry you can
even get up to 100 psi. Now I normally pump my
vredesteins to 145 psi. Is he wrong or am I?

guess that's why Sherwin was a pro rider, not a
mechanic :-)

Maybe it was 100 psi 30 years ago.

Yeah they were probably solid rubber back then

"Super Fred" <timlambert @ mindspring . com> wrote in message
news:RcUGc.40748$XM6.38535@attbi_s53...
|
| > I heard Paul Sherwin say that for wet conditions, tires
| > should be
pumped
| to
| > 65-75 psi, and when it's dry you can even get up to 100
| > psi. Now I
| normally
| > pump my vredesteins to 145 psi. Is he wrong or am I?
| >
|
| Maybe a difference between clinchers and sew-ups?

It's possible that Paul is messing up the conversion from
bar to psi

If he's been looking at the 7 bar range on his pump when he
puts air in his tires, well maybe he was just off doing the
conversion for his American audience.

I noticed they display the gaps now in both kilo and miles.

"Callistus Valerius" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

I heard Paul Sherwin say that for wet conditions, tires
should be pumped

to

Quoted message said:

65-75 psi, and when it's dry you can even get up to 100
psi. Now I

normally

Quoted message said:

pump my vredesteins to 145 psi. Is he wrong or am I?

That's "Sherwen." You're getting as bad as Lafferty

Chris, IIRC, yesterday Paul mentioned riding le Tour in
1985.

William Jones

"Chris" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

"Callistus Valerius" <[email hidden]> wrote in
message -"]news:[email hidden]-
link.net...

Quoted message said:

I heard Paul Sherwin say that for wet conditions, tires
should be pumped

to

Quoted message said:

65-75 psi, and when it's dry you can even get up to 100
psi. Now I

normally

Quoted message said:

pump my vredesteins to 145 psi. Is he wrong or am I?

You are absolutely wrong along with many other new
cyclists. That is the mark of a noob or worse, a clueless
veteran; overpumping your tires.

Still,

Quoted message said:

in road ITTs many guys use up to 120 or more depending on
conditions.

Using

Quoted message said:

145 on the road us just stupid in most cases although I
can think of some rider\road\equipment combinations that
might benefit from this level of pressure, you are
probably following the silly tradition of using the
manufacturer's maximum burst pressure label as a
"recommended" pressure. Dumb dumb dumb...

BTW, to save time in the future you are almost always
wrong. I will let

you

Quoted message said:

know if you happen to get something right. Is that a deal?

Another factoid: Paul uses no "i" in his name AFAIK. "Paul
Sherwen",

veteran

Quoted message said:

of 7 Tours including riding his last Tour with Roche in
1983 (IIRC...).

"Super Fred" <timlambert @ mindspring . com> wrote in message news:<RcUGc.40748$XM6.38535@attbi_s53>...

Quoted message said:

Quoted message said:

I heard Paul Sherwin say that for wet conditions, tires
should be pumped

to

Quoted message said:

65-75 psi, and when it's dry you can even get up to 100
psi. Now I

normally

Quoted message said:

pump my vredesteins to 145 psi. Is he wrong or am I?

Maybe a difference between clinchers and sew-ups?

Difference between today's tires and what he raced on?

Callistus Valerius said:

Now I normally pump my vredesteins to 145 psi. Is he wrong
or am I?

I'm not sure about Sherwen, but that seems very, very
high to me.

JT

"Callistus Valerius" wrote ...

Quoted message said:

I heard Paul Sherwin say that for wet conditions, tires
should be pumped

to

Quoted message said:

65-75 psi, and when it's dry you can even get up to 100
psi. Now I

normally

Quoted message said:

pump my vredesteins to 145 psi. Is he wrong or am I?

A former team-mate of mine, a 2, pumps his clinchers up to
160 psi for races.

"Callistus Valerius" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

I heard Paul Sherwin say that for wet conditions, tires
should be pumped

to

Quoted message said:

65-75 psi, and when it's dry you can even get up to 100
psi. Now I

normally

Quoted message said:

pump my vredesteins to 145 psi. Is he wrong or am I?

I'm trying to picture you right. (Nope, can't do it) but in
this case 65-75 psi is too soft for anyone. More like 90 in
the wet and 100 in the dry and the reason that you're
running 145 is because you are 300 lbs and riding 18's.