I just installed a power meter but have taken only 5 rides.
Have you ever set your metering to %FTP or Zone? I understand in sprint, one would like to see absolute figures. I’m referring to long rides and I find the % and zone gives me a range that I’m riding within that sets me on track. I’m not sure, perhaps it’s a matter of time in getting use to seeing spiky figures.
I have both side by side, Power zones and power %, just below Power 3s average Power and NP , it is much easier to look at zones or % during trainer training. And you do not have to remember absolute numbers that are changing during the year at list few times.
Originally Posted by sebo2000 I have both side by side, Power zones and power %, just below Power 3s average Power and NP , it is much easier to look at zones or % during trainer training. And you do not have to remember absolute numbers that are changing during the year at list few times.
Originally Posted by An old Guy Zone gives you 7 numbers with a big difference in effort from the bottom of one number to the top of that number. Not very interesting.
%FTP is more useful. Watts has move values in a range than %FTP, but may have no better accuracy.
Most of the modern computers if not all show zones with decimals.
1.2 1.3 1.4 etc. it is not just 3 for zone 3. example my Threshold power is displayed with 3.9W accuracy. Interesting because it is much easier to sty in that zone then looking at the number range.