I've got problems with my frame. I have ever since I got it. Now I am really ticked off because of the fact that now the bearing cap bolt is stripped at the little notch that keeps it from spinning so I can't even take the frame off. I have no clue what the matter with the frame is. It is a few millimetres off center with the tire/wheel, and the seat is noticably cocked to one side. This affects my gliding and coasting, so it has become an issue. What should I tell UDC? What should I do immediately? I don't plan on at least -paying- for a new frame as I fear the same problem would arise. To rule out a few things - the wheel is completely true, my other frames work on this wheel and are perfectly straight, and yes it does bother me enough to need change.
my sem frame doesnt line up with the bearings. you have to force it on. I took it off it to see what was wrong (whenever ever i would do certain clicks the whole thing would shift) and i alot of trouble getting it back on. My onza just fits right on perfectly. Does yours do that?
-- skate4flip
Post 23000, 25000, and 29000 in the Most Replys thread!!!!
The wheel is not dished, it turns evenly slanted to one side.
i told you like 5 months ago that one leg was slightly longer than the other...SHIM IT!
-- jagur
What might Sinter Klaas_Bil you for this year? -forget_your_life- -------------------------------------- -------*muni militia *------- *one wheeled death squad* ------------------------------------------------------------------------ jagur's Profile: http://www.unicyclist.com/profile/502 View this thread: http://www.unicyclist.com/thread/45185
If its not breaking anything or causing any noticeable disturbance while riding I would say just leave it...
-- forrestunifreak
warning: the above statement is usually not intended to offend anyone. it has been know to cause warts, ringworm, and diaper rash. it may contain logic, poltical incorrectyness, pchycological nudity, and traces of peanuts.you cant read this! 'My gallery' (http://tinyurl.com/bbf9x)
