Road Cycling · Public discussion

Saw my first Segway.

Started by Jon Isaacs · · Last activity · 13 posts · 859 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Road Cycling
Published
21 April 2003
Last activity
22 April 2003
Original author
Jon Isaacs
Posts
13
Discussion status
Public discussion
Total views
859
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–13 of 13
Posts remain in their original chronological order.

Text size
  1. On my ride to work this morning I had three firsts:

    1. Saw a Segway for the first time, the guy was riding it on an empty sidewalk. Basically it looks
    like someone riding one of the old push type lawn mowers. Worked quite well on a sidewalk that
    was 15 feet wide, nice and smooth and had no pedestrians or other vehicles. My guess is that
    were there much of a concentration of Segways, collisions would abound.

    2. Had a flat this morning. When replacing the tube, instead of putting in a new tube, I put the
    old tube back in. Had the tire buttoned up and was ready to pump it up but I kept wondering
    where the old tube was. I was looking around for the old tube and realized I had put it back in
    the tire.......

    3. First time to use a dollar bill as a boot. I hit something pretty hard and it cut the sidewall
    causing the tube to blow out. It got me to work but I am going to change the tire before I ride
    that bike home.

    jon

  2. Jon Isaacs said:

    2. Had a flat this morning. When replacing the tube, instead of putting in a new tube, I put the
    old tube back in. Had the tire buttoned up and was ready to pump it up but I kept wondering
    where the old tube was. I was looking around for the old tube and realized I had put it back
    in the tire.......

    I believe that qualifies you for membership in Densa. As soon as I remove a punctured tube, I tie a
    knot in it. Mounting a knotted tube is much more difficult.
    --
    terry morse Palo Alto, CA terrymorse.combike

  3. "Terry Morse" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    Jon Isaacs wrote: I believe that qualifies you for membership in Densa. As soon as I remove a
    punctured tube, I tie a knot in it. Mounting a knotted tube is much more difficult.
    --
    terry morse Palo Alto, CA terrymorse.combike

    Don't listen to him Jon. I've done it several times and surely if it can happen to me, a most gifted
    intellectual....ahh, ferget it!! We're Densa members!!!

    Cheers,

    Scott...

  4. "Jon Isaacs" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    On my ride to work this morning I had three firsts:

    1. Saw a Segway for the first time, the guy was riding it


    on an empty

    Quoted message said:

    sidewalk. Basically it looks like someone riding one of


    the old push type lawn

    Quoted message said:

    mowers. Worked quite well on a sidewalk that was 15 feet


    wide, nice and smooth

    Quoted message said:

    and had no pedestrians or other vehicles. My guess is


    that were there much of

    Quoted message said:

    a concentration of Segways, collisions would abound.

    That's what it looks like to me. Segways are too wide. There's more than one reason scooters have
    traditionally been single-track designs.

    Quoted message said:

    2. Had a flat this morning. When replacing the tube,


    instead of putting in a

    Quoted message said:

    new tube, I put the old tube back in. Had the tire


    buttoned up and was ready

    Quoted message said:

    to pump it up but I kept wondering where the old tube was.


    I was looking around

    Quoted message said:

    for the old tube and realized I had put it back in the


    tire.......

    See, you were never meant to be a surgeon anyway...

    Quoted message said:

    3. First time to use a dollar bill as a boot. I hit


    something pretty hard and

    Quoted message said:

    it cut the sidewall causing the tube to blow out. It got


    me to work but I am

    Quoted message said:

    going to change the tire before I ride that bike home.

    Tyvek envelopes are incredibly strong, and make great boot material. I've used them a couple of
    times. Duct tape works fine too, at least on a mountain bike tire.

    Matt O.

  5. Oh! Oh! Oh! Can I be a Densa memeber too? I didn't put a punctured tube back in, but I was working
    on a computer assembly and put a chip in upside down. What's worse is that it took me a lot of
    troubleshooting time to find
    it. One the upside, I'd done a very nice soldering job.

    --

    alan

    Anyone who believes in a liberal media has never read the "Daily Oklahoman."

    "S. Anderson" <[email hidden]> wrote in message news:ScZoa.2161> Don't listen to him
    Jon. I've done it several times and surely if it can

    Quoted message said:

    happen to me, a most gifted intellectual....ahh, ferget it!! We're Densa members!!!

  6. Matt O'Toole wrote:

    "Tyvek envelopes are incredibly strong, and make great boot material. I've used them a couple of
    times. Duct tape works fine too, at least on a mountain bike tire.

    Matt O."

    I use the denim patches available at any supermarket. Stronger than Tyvek, less stretchy than
    duct tape (although that can be used to hold it in place) and that dollar bill will usually buy
    about ten!

    May you have the wind at your back. And a really low gear for the hills! Chris

    Chris'Z Corner "The Website for the Common Bicyclist": geocities.comczcorner

  7. alan said:

    Oh! Oh! Oh! Can I be a Densa memeber too?

    Take the test here and see for yourself:

    densa.orgdensa.org

    [Web site loads slowly, so be patient]
    --
    terry morse Palo Alto, CA terrymorse.combike

  8. "Terry Morse" <[email hidden]> wrote in message
    "]news:[email hidden]...

    Quoted message said:

    alan wrote:

    <<snip..>>

    Quoted message said:

    [Web site loads slowly, so be patient]
    --
    terry morse Palo Alto, CA terrymorse.combike

    Naturally..it's the Densa site!!

    Cheers,

    Scott..

  9. Terry Morse <[email hidden]> wrote:

    : densa.orgdensa.org

    : [Web site loads slowly, so be patient]

    It would have to, wouldn't it?

    --
    'They paved paradise And put up a parking lot' -Joni Mitchell

  10. Terry Morse said:
    alan said:

    Oh! Oh! Oh! Can I be a Densa memeber too?

    Take the test here and see for yourself:

    densa.orgdensa.org

    [Web site loads slowly, so be patient]


    LOL! I couldn't wait long enough. I must be ADHD besides!

    --

    John Foltz --- O _ Baron --- _O _ V-Rex 24/63 --- _\\/\-%)
    _________(_)`=()___________________(_)= (_)_____

  11. Terry Morse said:
    alan said:

    Oh! Oh! Oh! Can I be a Densa memeber too?

    Take the test here and see for yourself:

    densa.orgdensa.org

    [Web site loads slowly, so be patient]

    Cute

    --

    David L. Johnson

    __o | Do not worry about your difficulties in mathematics, I can _`\(,_ | assure you that mine
    are all greater. -- A. Einstein (_)/ (_) |

  12. Actually, it loads pretty fast. I mean, look at the source code:

    <HTML>

    <HEAD> <TITLE>densa</TITLE> <META NAME="GENERATOR" CONTENT="Arachnophilia 3.4"> <META
    NAME="FORMATTER" CONTENT="Arachnophilia 3.4"> </HEAD>

    <BODY BACKGROUND="" BGCOLOR="#000000" TEXT="#000000" LINK="#0000ff" VLINK="#0000ff" ALINK="#ff0000">

    </BODY>

    </HTML>

    In article said:
    alan said:

    Oh! Oh! Oh! Can I be a Densa memeber too?

    Take the test here and see for yourself:

    densa.orgdensa.org

    [Web site loads slowly, so be patient]
    --
    terry morse Palo Alto, CA terrymorse.combike

  13. Leonard Migliore said:

    Actually, it loads pretty fast. I mean, look at the source code:

    You must already be a Densa member.

    Quoted message said:


    In article said:
    alan said:

    Oh! Oh! Oh! Can I be a Densa memeber too?

    Take the test here and see for yourself:

    densa.orgdensa.org

    [Web site loads slowly, so be patient]
    --
    terry morse Palo Alto, CA terrymorse.combike

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.