road bike barend mirrors

"yk" <[email hidden]> wrote in news:[email hidden]:

Quoted message said:

Are they better than helment mounted mirror ?

Unless a handlebar mirror is much larger than a helmet mirror, it will be
hard to see out of.

yk said:

Are they better than helment mounted mirror ?

Some people seem to like them, but more people use head mirrors, the
advantages are less vibration blur and greater field of view with head scan.

"yk" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

Are they better than helment mounted mirror ?

For me, yes. I had trouble focusing my eyes on the helmet mounted.

Vibration is a problem, I reduce it somewhat by wrapping the arm with friction
tape and cotton string, it helps some. A flat mirror still vibrates too much to
be useful a lot of time, I use the convex one.

The Bell brand comes with a mount designed for handlebars. I put it on my brake
handle with some electrical cable ties, like it better there.

An anonymous poster asked:

Quoted message said:

Are they better than helment mounted mirror ?

No, they're considerably worse.

Handlebar-mounted mirrors are so far from the eye, and so subject to
vibration that they must be convex to work at all.

Convex mirrors distort apparent distance, and also require you to
re-focus your eye.

Helmet- or eyeglass-mount mirrors are close enough to the eye to give a
good field of view even though they're small.

The effective field of view is greatly enlarged by the fact that you can
"scan" by turning your head from side to side. They actually give
better visibility than all 3 of the mirrors of a typical car.

They are not subject to as much vibration as handlebar-mounted mirrors.

Because they're flat, you don't need to re-focus your eye to use them.

Head-mounted mirrors do take a bit of getting used to, typically a
couple of weeks of regular use.

Sheldon "3rd Eye" Brown
+-----------------------------------------+
| I’ll be performing in drag in |
| The Summer Revels |
| June 25 & 26, Museum Wharf, Boston |
| http://revels.org |
See a photo at:
http://home.comcast.net/~rousseau.j/revels/Sites-Pages/Image29.html
+-----------------------------------------+
Harris Cyclery, West Newton, Massachusetts
Phone 617-244-9772 FAX 617-244-1041
http://harriscyclery.com
Hard-to-find parts shipped Worldwide
http://captainbike.com http://sheldonbrown.com

"yk" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

Are they better than helment mounted mirror ?

Obviously a personal preference. I am right eye dominant so a helmet /
glasses mount mirror needs to go on the right which doesn't make much sense.
I've used the Third Eye barend mirrors on drop bars for at least 10 years
and wouldn't use anything else. Innocuous, very little vibration, as easy to
use as drivers side mirror on your car. Keeping track of the behavior of
overtaking vehicles is second nature.

Note: Mirrors on little stalks don't work. They vibrate way to much. Are
easily damaged.

lickbike.comproductpage.aspOpen ↗
Bill

Quoting yk <[email hidden]>:

Quoted message said:

Are they better than helment mounted mirror ?

[of barend mirrors]

I tried one when I still had DT shifters; it was hopeless. The vibration
makes it hard to see anything, and the mirror is always being pointed
where you don't want it. The real danger would be in assuming what you can
see in the limited FOV of the mirror is all there is.
--
David Damerell <[email hidden]> flcl?
Today is First Tuesday, Presuary.